mirror of
https://github.com/openwrt/openwrt.git
synced 2026-10-14 15:17:37 +04:00
ramips: add support for Yuncore 1200F
The Yuncore 1200F is an outdoor 802.11ac access point based on the MediaTek MT7628AN SoC with an MT7663E PCIe 5 GHz radio. The device is also sold under the KuWFi AP1200F name. Hardware: - SoC: MediaTek MT7628AN - CPU: MIPS 24KEc - RAM: 64 MiB - Flash: 8 MiB SPI NOR - Ethernet: 2x 10/100 Mbps - WiFi 2.4 GHz: MT7628AN WMAC - WiFi 5 GHz: MT7663E PCIe - LEDs: status, LAN, WAN - Button: reset - Watchdog: GPIO watchdog MAC addresses: - Ethernet: factory 0x0004 - 2.4 GHz WiFi: factory 0x0028 - 5 GHz WiFi: factory 0x8004 Network: - LAN: eth0.1, switch port 4 - WAN: eth0.2, switch port 3 Installation: - Build the sysupgrade image: openwrt-ramips-mt76x8-yuncore_1200f-squashfs-sysupgrade.bin - The stock firmware provides a U-Boot recovery web interface. It can be entered by holding the reset button while powering on the device. Connect to http://192.168.0.100/ and upload openwrt-sysupgrade.bin file. Recovery: - Reverting to stock firmware has not been tested. The 5 GHz radio is detected as PCI ID 14c3:7663 and uses mt7615e together with the MT7663 AP firmware. kmod-mt76x2 is explicitly excluded because this board uses MT7663E, not MT76x2. Tested: - Build succeeds for ramips/mt76x8 - Sysupgrade image boots - Ethernet LAN/WAN work - 2.4 GHz AP starts on phy0 - 5 GHz AP starts on phy1 - Stable MAC addresses are assigned to Ethernet, phy0 and phy1 Signed-off-by: Gunther Stammwitz <gstammw@gmx.net> Link: https://github.com/openwrt/openwrt/pull/23613 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
This commit is contained in:
Gunther Stammwitz authored and 
Jonas Jelonek committed
1 parent
e3fdcbb8a0
commit
1ba7b38cfc
4 files changed
+225
No files matched your search
@@ -0,0 +1,206 @@
|
||||
#include "mt7628an.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "yuncore,1200f", "mediatek,mt7628an-soc";
|
||||
model = "Yuncore 1200F";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
aliases {
|
||||
label-mac = ðernet;
|
||||
led-boot = &led_indicator;
|
||||
led-failsafe = &led_indicator;
|
||||
led-running = &led_indicator;
|
||||
led-upgrade = &led_indicator;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_indicator: indicator {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_LAN;
|
||||
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wan {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&gpio 40 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
function-enumerator = <0>;
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "phy0radio";
|
||||
};
|
||||
};
|
||||
|
||||
watchdog {
|
||||
compatible = "linux,wdt-gpio";
|
||||
gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
|
||||
hw_algo = "toggle";
|
||||
hw_margin_ms = <20000>;
|
||||
always-running;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x400>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Observed at factory + 0x4:
|
||||
* 9c:e5:49:60:2a:64
|
||||
*/
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
reg = <0x4 0x6>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Observed at factory + 0x28:
|
||||
* 9c:e5:49:60:2a:65
|
||||
*/
|
||||
macaddr_factory_28: macaddr@28 {
|
||||
reg = <0x28 0x6>;
|
||||
};
|
||||
|
||||
eeprom_factory_8000: eeprom@8000 {
|
||||
reg = <0x8000 0x4da8>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Observed at factory + 0x8004:
|
||||
* 9c:e5:49:60:2a:66
|
||||
*
|
||||
* Do not apply mac-address-increment here.
|
||||
* The stored address is already the final 5 GHz MAC.
|
||||
*/
|
||||
macaddr_factory_8004: macaddr@8004 {
|
||||
reg = <0x8004 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7b0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ðernet {
|
||||
nvmem-cells = <&macaddr_factory_4>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&esw {
|
||||
mediatek,portmap = <0x2f>;
|
||||
};
|
||||
|
||||
&wmac {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_28>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
|
||||
/*
|
||||
* Allow full 2.4 GHz band. The previous upper limit of 2462000
|
||||
* caused channels 10-13 to appear disabled.
|
||||
*/
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "pwm1", "pwm0", "uart2", "uart1", "i2c", "refclk",
|
||||
"sdmode", "i2s", "spi cs1", "spis",
|
||||
"gpio", "p0led_an", "p1led_an", "p2led_an", "p3led_an",
|
||||
"p4led_an", "wled_kn", "wled_an", "p0led_kn", "p1led_kn",
|
||||
"p2led_kn", "p3led_kn", "p4led_kn";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_8004>;
|
||||
nvmem-cell-names = "eeprom", "mac-address";
|
||||
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
|
||||
led {
|
||||
led-sources = <2>;
|
||||
led-active-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -1543,3 +1543,14 @@ define Device/teltonika_rut241
|
||||
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += teltonika_rut241
|
||||
|
||||
define Device/yuncore_1200f
|
||||
IMAGE_SIZE := 7872k
|
||||
DEVICE_VENDOR := Yuncore
|
||||
DEVICE_MODEL := 1200F
|
||||
DEVICE_ALT0_VENDOR := KuWFi
|
||||
DEVICE_ALT0_MODEL := AP1200F
|
||||
SUPPORTED_DEVICES += yuncore,1200f
|
||||
DEVICE_PACKAGES := kmod-mt7615e kmod-mt7663-firmware-ap -kmod-mt76x2 -kmod-mt76x2-common -kmod-mt76x02-common
|
||||
endef
|
||||
TARGET_DEVICES += yuncore_1200f
|
||||
@@ -24,6 +24,10 @@ yuncore,m300)
|
||||
ucidef_set_led_switch "lan" "lan" "green:lan" "switch0" "0xf"
|
||||
ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10"
|
||||
;;
|
||||
yuncore,1200f)
|
||||
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x10"
|
||||
ucidef_set_led_switch "wan" "WAN" "green:wan" "switch0" "0x08"
|
||||
;;
|
||||
creality,wb-01)
|
||||
ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x1"
|
||||
;;
|
||||
|
||||
@@ -258,6 +258,10 @@ ramips_setup_interfaces()
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:2" "2:lan:1" "4:wan" "6@eth0"
|
||||
;;
|
||||
yuncore,1200f)
|
||||
ucidef_add_switch "switch0" \
|
||||
"4:lan" "3:wan" "6@eth0"
|
||||
;;
|
||||
yuncore,cpe200)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "4:wan" "6@eth0"
|
||||
|
||||
Reference in new issue
Block a user