mpc85xx: ws-ap3715i: enable access to u-boot env

find_mtd_part() outputs /dev/mtdblockX, to which fw_setenv cannot
write, "/dev/mtd$(find_mtd_index '<vol name>')" could be used instead.

The envsize should also be changed to 0x1000 to make the CRC checksum
valid and the env block recognized by the uboot-envtools, but the
flash sector size remains 0x10000, otherwise the env block will be
readable but not writable.

The "read-only" mark within device tree is also removed.

Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/23121
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Edward Chow
2026-04-28 11:29:01 +08:00
committed by Robert Marko
parent 01df243f21
commit 65a57d7159
2 changed files with 2 additions and 4 deletions
@@ -9,8 +9,8 @@ board=$(board_name)
case "$board" in
enterasys,ws-ap3715i)
ubootenv_add_uci_config "$(find_mtd_part 'cfg1')" "0x0" "0x10000" "0x10000"
ubootenv_add_uci_config "$(find_mtd_part 'cfg2')" "0x0" "0x10000" "0x10000"
ubootenv_add_uci_config "/dev/mtd$(find_mtd_index 'cfg1')" "0x0" "0x1000" "0x10000"
ubootenv_add_uci_config "/dev/mtd$(find_mtd_index 'cfg2')" "0x0" "0x1000" "0x10000"
;;
extreme-networks,ws-ap3825i)
ubootenv_add_uci_config "$(find_mtd_part 'cfg1')" "0x0" "0x10000" "0x20000"
@@ -234,13 +234,11 @@
partition@120000 {
reg = <0x120000 0x10000>;
label = "cfg1";
read-only;
};
partition@130000 {
reg = <0x130000 0x10000>;
label = "cfg2";
read-only;
};
partition@140000 {