mirror of
https://github.com/openwrt/openwrt.git
synced 2026-06-17 17:01:44 +04:00
mediatek: filogic: add support for Globitel BT-R320
The Globitel BT-R320 (PCB rev V1.2) is an enterprise/ISP Wi-Fi 6 router based on the MediaTek MT7981B (Filogic 820) platform. Hardware specifications: SoC: MediaTek MT7981B (Filogic 820) RAM: 1GB DDR4 (Nanya NT5AD512M16C4-HR) Flash: 128GB eMMC (UNIC UNMEN07GC4C31BS) Switch: MediaTek MT7531AE Ethernet: 1x 1GbE WAN, 3x 1GbE LAN Wi-Fi: 2.4 GHz: 2x2 MT7976CN and 5 GHz: 2x2 MT7976CN (integrated FEM) USB: 1x USB 3.0 LEDs: 2x Green (WLAN 2.4G / 5G) Buttons: 1x Reset (GPIO 1, ACTIVE_LOW), 1x WPS (GPIO 0, ACTIVE_LOW) Power: 12V, 1.5A UART: 115200 8n1 Note on eMMC configuration (Addressing 52MHz limit on 128GB IC): Debugfs output from the OEM firmware (/sys/kernel/debug/mmc0/ios) confirms the manufacturer deliberately limits the eMMC to 52MHz High-Speed mode at 3.3V (actual clock: 52000000 Hz, bus width: 8 bits, timing spec: mmc high-speed). Therefore, the conservative DTS properties (max-frequency = <52000000> and lack of HS200/HS400 support) strictly reflect the OEM hardware design. Installation instructions: 1. SSH into the stock router (192.168.132.1, user: root, pass: password). 2. Back up existing partitions using dd. 3. Upload the OpenWrt-built GPT partition table (*-gpt.bin) and flash it: dd if=/tmp/gpt.bin of=/dev/mmcblk0 bs=512 count=34 conv=fsync echo -e 'w' | fdisk /dev/mmcblk0 4. Flash the OpenWrt-built U-Boot (*-bl31-uboot.fip) to the FIP partition: dd if=/tmp/uboot.fip of=$(blkid -t PARTLABEL=fip -o device) conv=fsync 5. Disconnect power. Connect PC with static IP 192.168.1.2. 6. Hold reset button, power on, and wait 10 seconds to enter U-Boot web UI. 7. Flash the OpenWrt sysupgrade image. Stock partition layout: p1: uboot_env p2: factory p3: fip p4: kernel p5: rootfs p6: userdata MAC address layout (factory partition, mmcblk0p2): WAN: xx:xx:xx:xx:xx:xx (factory offset 0x24) LAN: xx:xx:xx:xx:xx:xy (factory offset 0x2a) Label: Matches LAN MAC (0x2a) 2.4G: Base MAC (extracted from factory offset 0x4) 5G: Base MAC with Locally Administered bit set Signed-off-by: Kirill Molotov <kirill2015molotov@gmail.com> Link: https://github.com/openwrt/openwrt/pull/23188 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Kirill Molotov
committed by
Hauke Mehrtens
Hauke Mehrtens
parent
7116f3cd00
commit
a3105d3f95
@@ -421,6 +421,18 @@ define U-Boot/mt7981_glinet_gl-xe3000
|
|||||||
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4
|
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4
|
||||||
endef
|
endef
|
||||||
|
|
||||||
|
define U-Boot/mt7981_globitel_bt-r320
|
||||||
|
NAME:=Globitel BT-R320
|
||||||
|
BUILD_SUBTARGET:=filogic
|
||||||
|
BUILD_DEVICES:=globitel_bt-r320
|
||||||
|
UBOOT_CONFIG:=mt7981_globitel_bt-r320
|
||||||
|
UBOOT_IMAGE:=u-boot.fip
|
||||||
|
BL2_BOOTDEV:=emmc
|
||||||
|
BL2_SOC:=mt7981
|
||||||
|
BL2_DDRTYPE:=ddr4
|
||||||
|
DEPENDS:=+trusted-firmware-a-mt7981-emmc-ddr4
|
||||||
|
endef
|
||||||
|
|
||||||
define U-Boot/mt7981_h3c_magic-nx30-pro
|
define U-Boot/mt7981_h3c_magic-nx30-pro
|
||||||
NAME:=H3C Magic NX30 Pro
|
NAME:=H3C Magic NX30 Pro
|
||||||
BUILD_SUBTARGET:=filogic
|
BUILD_SUBTARGET:=filogic
|
||||||
@@ -1231,6 +1243,7 @@ UBOOT_TARGETS := \
|
|||||||
mt7981_glinet_gl-mt2500 \
|
mt7981_glinet_gl-mt2500 \
|
||||||
mt7981_glinet_gl-x3000 \
|
mt7981_glinet_gl-x3000 \
|
||||||
mt7981_glinet_gl-xe3000 \
|
mt7981_glinet_gl-xe3000 \
|
||||||
|
mt7981_globitel_bt-r320 \
|
||||||
mt7981_h3c_magic-nx30-pro \
|
mt7981_h3c_magic-nx30-pro \
|
||||||
mt7981_imou_hx21 \
|
mt7981_imou_hx21 \
|
||||||
mt7981_jcg_q30-pro \
|
mt7981_jcg_q30-pro \
|
||||||
|
|||||||
@@ -0,0 +1,348 @@
|
|||||||
|
--- /dev/null
|
||||||
|
+++ b/arch/arm/dts/mt7981-globitel-bt-r320.dts
|
||||||
|
@@ -0,0 +1,160 @@
|
||||||
|
+// SPDX-License-Identifier: GPL-2.0
|
||||||
|
+
|
||||||
|
+/dts-v1/;
|
||||||
|
+#include "mt7981.dtsi"
|
||||||
|
+#include <dt-bindings/gpio/gpio.h>
|
||||||
|
+#include <dt-bindings/input/input.h>
|
||||||
|
+
|
||||||
|
+/ {
|
||||||
|
+ #address-cells = <1>;
|
||||||
|
+ #size-cells = <1>;
|
||||||
|
+ model = "Globitel BT-R320";
|
||||||
|
+ compatible = "globitel,bt-r320", "mediatek,mt7981", "mediatek,mt7981-rfb";
|
||||||
|
+
|
||||||
|
+ chosen {
|
||||||
|
+ stdout-path = &uart0;
|
||||||
|
+ tick-timer = &timer0;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ memory@40000000 {
|
||||||
|
+ device_type = "memory";
|
||||||
|
+ reg = <0x40000000 0x40000000>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ reg_3p3v: regulator-3p3v {
|
||||||
|
+ compatible = "regulator-fixed";
|
||||||
|
+ regulator-name = "fixed-3.3V";
|
||||||
|
+ regulator-min-microvolt = <3300000>;
|
||||||
|
+ regulator-max-microvolt = <3300000>;
|
||||||
|
+ regulator-boot-on;
|
||||||
|
+ regulator-always-on;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ gpio-keys {
|
||||||
|
+ compatible = "gpio-keys";
|
||||||
|
+
|
||||||
|
+ reset {
|
||||||
|
+ label = "reset";
|
||||||
|
+ linux,code = <KEY_RESTART>;
|
||||||
|
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ wps {
|
||||||
|
+ label = "wps";
|
||||||
|
+ linux,code = <KEY_WPS_BUTTON>;
|
||||||
|
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&uart0 {
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&uart1 {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&uart1_pins>;
|
||||||
|
+ status = "disabled";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+ð {
|
||||||
|
+ status = "okay";
|
||||||
|
+ mediatek,gmac-id = <0>;
|
||||||
|
+ phy-mode = "sgmii";
|
||||||
|
+ mediatek,switch = "mt7531";
|
||||||
|
+ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||||
|
+
|
||||||
|
+ fixed-link {
|
||||||
|
+ speed = <1000>;
|
||||||
|
+ full-duplex;
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&pio {
|
||||||
|
+ spic_pins: spi1-pins-func-1 {
|
||||||
|
+ mux {
|
||||||
|
+ function = "spi";
|
||||||
|
+ groups = "spi1_1";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ uart1_pins: spi1-pins-func-3 {
|
||||||
|
+ mux {
|
||||||
|
+ function = "uart";
|
||||||
|
+ groups = "uart1_2";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ one_pwm_pins: one-pwm-pins {
|
||||||
|
+ mux {
|
||||||
|
+ function = "pwm";
|
||||||
|
+ groups = "pwm0_1";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ two_pwm_pins: two-pwm-pins {
|
||||||
|
+ mux {
|
||||||
|
+ function = "pwm";
|
||||||
|
+ groups = "pwm0_1", "pwm1_0";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ three_pwm_pins: three-pwm-pins {
|
||||||
|
+ mux {
|
||||||
|
+ function = "pwm";
|
||||||
|
+ groups = "pwm0_1", "pwm1_0", "pwm2";
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ mmc0_pins_default: mmc0default {
|
||||||
|
+ mux {
|
||||||
|
+ function = "flash";
|
||||||
|
+ groups = "emmc_45";
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ conf-cmd-dat {
|
||||||
|
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO",
|
||||||
|
+ "SPI0_CS", "SPI0_HOLD", "SPI0_WP",
|
||||||
|
+ "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
|
||||||
|
+ input-enable;
|
||||||
|
+ drive-strength = <MTK_DRIVE_4mA>;
|
||||||
|
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ conf-clk {
|
||||||
|
+ pins = "SPI1_CS";
|
||||||
|
+ drive-strength = <MTK_DRIVE_6mA>;
|
||||||
|
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
||||||
|
+ };
|
||||||
|
+
|
||||||
|
+ conf-rst {
|
||||||
|
+ pins = "PWM0";
|
||||||
|
+ drive-strength = <MTK_DRIVE_4mA>;
|
||||||
|
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
||||||
|
+ };
|
||||||
|
+ };
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&pwm {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&two_pwm_pins>;
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&watchdog {
|
||||||
|
+ status = "disabled";
|
||||||
|
+};
|
||||||
|
+
|
||||||
|
+&mmc0 {
|
||||||
|
+ pinctrl-names = "default";
|
||||||
|
+ pinctrl-0 = <&mmc0_pins_default>;
|
||||||
|
+ bus-width = <8>;
|
||||||
|
+ max-frequency = <52000000>;
|
||||||
|
+ cap-mmc-highspeed;
|
||||||
|
+ cap-mmc-hw-reset;
|
||||||
|
+ vmmc-supply = <®_3p3v>;
|
||||||
|
+ non-removable;
|
||||||
|
+ status = "okay";
|
||||||
|
+};
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/defenvs/mt7981_globitel_bt-r320_env
|
||||||
|
@@ -0,0 +1,52 @@
|
||||||
|
+ipaddr=192.168.1.1
|
||||||
|
+serverip=192.168.1.254
|
||||||
|
+loadaddr=0x46000000
|
||||||
|
+console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
|
||||||
|
+bootargs=root=/dev/fit0 rootwait
|
||||||
|
+bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
|
||||||
|
+bootconf=config-1#mt7981b-globitel-bt-r320
|
||||||
|
+bootdelay=0
|
||||||
|
+bootfile=openwrt-mediatek-filogic-globitel_bt-r320-initramfs-recovery.itb
|
||||||
|
+bootfile_bl2=openwrt-mediatek-filogic-globitel_bt-r320-emmc-preloader.bin
|
||||||
|
+bootfile_fip=openwrt-mediatek-filogic-globitel_bt-r320-emmc-bl31-uboot.fip
|
||||||
|
+bootfile_upg=openwrt-mediatek-filogic-globitel_bt-r320-squashfs-sysupgrade.itb
|
||||||
|
+bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
|
||||||
|
+bootmenu_default=0
|
||||||
|
+bootmenu_delay=0
|
||||||
|
+bootmenu_title= ;34m( ( ( 9mOpenWrt;34m ) ) ) ;36m[eMMC]m
|
||||||
|
+bootmenu_0=Initialize environment.=run _firstboot
|
||||||
|
+bootmenu_0d=Run default boot command.=run boot_default
|
||||||
|
+bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
|
||||||
|
+bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
|
||||||
|
+bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
|
||||||
|
+bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
|
||||||
|
+bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
|
||||||
|
+bootmenu_6=mLoad BL31+U-Boot FIP via TFTP then write to eMMC.m=run boot_tftp_write_fip ; run bootmenu_confirm_return
|
||||||
|
+bootmenu_7=mLoad BL2 preloader via TFTP then write to eMMC.m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
|
||||||
|
+bootmenu_8=Reboot.=reset
|
||||||
|
+bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
|
||||||
|
+boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
|
||||||
|
+boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
|
||||||
|
+boot_production=run emmc_read_production && bootm $loadaddr#$bootconf
|
||||||
|
+boot_recovery=run emmc_read_recovery && bootm $loadaddr#$bootconf
|
||||||
|
+boot_emmc=run boot_production ; run boot_recovery
|
||||||
|
+boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done
|
||||||
|
+boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
|
||||||
|
+boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
|
||||||
|
+boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
|
||||||
|
+boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
|
||||||
|
+boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
|
||||||
|
+mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
|
||||||
|
+mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
|
||||||
|
+part_default=production
|
||||||
|
+part_recovery=recovery
|
||||||
|
+reset_factory=eraseenv && reset
|
||||||
|
+emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
|
||||||
|
+emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
|
||||||
|
+emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
|
||||||
|
+emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
|
||||||
|
+emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
|
||||||
|
+emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
|
||||||
|
+_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
|
||||||
|
+_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
|
||||||
|
+_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
|
||||||
|
+_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title m$verm"
|
||||||
|
--- /dev/null
|
||||||
|
+++ b/configs/mt7981_globitel_bt-r320_defconfig
|
||||||
|
@@ -0,0 +1,126 @@
|
||||||
|
+CONFIG_ARM=y
|
||||||
|
+CONFIG_ARM_SMCCC=y
|
||||||
|
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
|
||||||
|
+CONFIG_POSITION_INDEPENDENT=y
|
||||||
|
+CONFIG_ARCH_MEDIATEK=y
|
||||||
|
+CONFIG_TEXT_BASE=0x41e00000
|
||||||
|
+CONFIG_SYS_MALLOC_F_LEN=0x4000
|
||||||
|
+CONFIG_NR_DRAM_BANKS=1
|
||||||
|
+CONFIG_ENV_SIZE=0x40000
|
||||||
|
+CONFIG_ENV_OFFSET=0x400000
|
||||||
|
+CONFIG_DEFAULT_DEVICE_TREE="mt7981-globitel-bt-r320"
|
||||||
|
+CONFIG_OF_LIBFDT_OVERLAY=y
|
||||||
|
+CONFIG_TARGET_MT7981=y
|
||||||
|
+CONFIG_SYS_LOAD_ADDR=0x46000000
|
||||||
|
+CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
|
||||||
|
+CONFIG_DEBUG_UART_BASE=0x11002000
|
||||||
|
+CONFIG_DEBUG_UART_CLOCK=40000000
|
||||||
|
+CONFIG_ENV_OFFSET_REDUND=0x440000
|
||||||
|
+CONFIG_PCI=y
|
||||||
|
+CONFIG_DEBUG_UART=y
|
||||||
|
+CONFIG_AHCI=y
|
||||||
|
+CONFIG_FIT=y
|
||||||
|
+CONFIG_BOOTDELAY=30
|
||||||
|
+CONFIG_AUTOBOOT_KEYED=y
|
||||||
|
+CONFIG_AUTOBOOT_MENU_SHOW=y
|
||||||
|
+CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-globitel-bt-r320.dtb"
|
||||||
|
+CONFIG_LOGLEVEL=7
|
||||||
|
+CONFIG_PRE_CONSOLE_BUFFER=y
|
||||||
|
+CONFIG_LOG=y
|
||||||
|
+# CONFIG_BOARD_INIT is not set
|
||||||
|
+CONFIG_BOARD_LATE_INIT=y
|
||||||
|
+CONFIG_HUSH_PARSER=y
|
||||||
|
+CONFIG_SYS_PROMPT="MT7981> "
|
||||||
|
+CONFIG_CMD_CPU=y
|
||||||
|
+CONFIG_CMD_LICENSE=y
|
||||||
|
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
|
||||||
|
+CONFIG_CMD_BOOTMENU=y
|
||||||
|
+CONFIG_CMD_ASKENV=y
|
||||||
|
+CONFIG_CMD_ERASEENV=y
|
||||||
|
+CONFIG_CMD_ENV_FLAGS=y
|
||||||
|
+CONFIG_CMD_RNG=y
|
||||||
|
+CONFIG_CMD_STRINGS=y
|
||||||
|
+CONFIG_CMD_DM=y
|
||||||
|
+CONFIG_CMD_GPIO=y
|
||||||
|
+CONFIG_CMD_PWM=y
|
||||||
|
+CONFIG_CMD_GPT=y
|
||||||
|
+CONFIG_CMD_MMC=y
|
||||||
|
+CONFIG_CMD_PART=y
|
||||||
|
+CONFIG_CMD_PCI=y
|
||||||
|
+CONFIG_CMD_USB=y
|
||||||
|
+CONFIG_CMD_TFTPSRV=y
|
||||||
|
+CONFIG_CMD_RARP=y
|
||||||
|
+CONFIG_CMD_CDP=y
|
||||||
|
+CONFIG_CMD_SNTP=y
|
||||||
|
+CONFIG_CMD_LINK_LOCAL=y
|
||||||
|
+CONFIG_CMD_DHCP=y
|
||||||
|
+CONFIG_CMD_DNS=y
|
||||||
|
+CONFIG_CMD_PING=y
|
||||||
|
+CONFIG_CMD_PXE=y
|
||||||
|
+CONFIG_CMD_CACHE=y
|
||||||
|
+CONFIG_CMD_PSTORE=y
|
||||||
|
+CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
|
||||||
|
+CONFIG_CMD_UUID=y
|
||||||
|
+CONFIG_CMD_HASH=y
|
||||||
|
+CONFIG_CMD_SMC=y
|
||||||
|
+CONFIG_CMD_EXT4=y
|
||||||
|
+CONFIG_CMD_FAT=y
|
||||||
|
+CONFIG_CMD_FS_GENERIC=y
|
||||||
|
+CONFIG_CMD_FS_UUID=y
|
||||||
|
+CONFIG_OF_EMBED=y
|
||||||
|
+CONFIG_ENV_OVERWRITE=y
|
||||||
|
+CONFIG_ENV_IS_IN_MMC=y
|
||||||
|
+CONFIG_ENV_REDUNDANT=y
|
||||||
|
+CONFIG_ENV_RELOC_GD_ENV_ADDR=y
|
||||||
|
+CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
|
||||||
|
+CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/mt7981_globitel_bt-r320_env"
|
||||||
|
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
||||||
|
+CONFIG_VERSION_VARIABLE=y
|
||||||
|
+CONFIG_NETCONSOLE=y
|
||||||
|
+CONFIG_USE_IPADDR=y
|
||||||
|
+CONFIG_IPADDR="192.168.1.1"
|
||||||
|
+CONFIG_USE_SERVERIP=y
|
||||||
|
+CONFIG_SERVERIP="192.168.1.254"
|
||||||
|
+CONFIG_NET_RANDOM_ETHADDR=y
|
||||||
|
+CONFIG_SCSI_AHCI=y
|
||||||
|
+CONFIG_AHCI_PCI=y
|
||||||
|
+CONFIG_MTK_AHCI=y
|
||||||
|
+CONFIG_BUTTON=y
|
||||||
|
+CONFIG_BUTTON_GPIO=y
|
||||||
|
+CONFIG_CLK=y
|
||||||
|
+CONFIG_GPIO_HOG=y
|
||||||
|
+CONFIG_LED=y
|
||||||
|
+CONFIG_LED_BLINK=y
|
||||||
|
+CONFIG_LED_GPIO=y
|
||||||
|
+CONFIG_SUPPORT_EMMC_BOOT=y
|
||||||
|
+CONFIG_MMC_HS200_SUPPORT=y
|
||||||
|
+CONFIG_MMC_MTK=y
|
||||||
|
+CONFIG_PHY_FIXED=y
|
||||||
|
+CONFIG_MEDIATEK_ETH=y
|
||||||
|
+CONFIG_PCIE_MEDIATEK=y
|
||||||
|
+CONFIG_PHY=y
|
||||||
|
+CONFIG_PHY_MTK_TPHY=y
|
||||||
|
+CONFIG_PINCTRL=y
|
||||||
|
+CONFIG_PINCONF=y
|
||||||
|
+CONFIG_PINCTRL_MT7622=y
|
||||||
|
+CONFIG_PINCTRL_MT7981=y
|
||||||
|
+CONFIG_POWER_DOMAIN=y
|
||||||
|
+CONFIG_MTK_POWER_DOMAIN=y
|
||||||
|
+CONFIG_DM_REGULATOR=y
|
||||||
|
+CONFIG_DM_REGULATOR_FIXED=y
|
||||||
|
+CONFIG_DM_REGULATOR_GPIO=y
|
||||||
|
+CONFIG_DM_PWM=y
|
||||||
|
+CONFIG_PWM_MTK=y
|
||||||
|
+CONFIG_RAM=y
|
||||||
|
+CONFIG_DM_RNG=y
|
||||||
|
+CONFIG_RNG_MTK_V2=y
|
||||||
|
+CONFIG_SCSI=y
|
||||||
|
+CONFIG_DM_SERIAL=y
|
||||||
|
+CONFIG_SERIAL_RX_BUFFER=y
|
||||||
|
+CONFIG_MTK_SERIAL=y
|
||||||
|
+CONFIG_SPI=y
|
||||||
|
+CONFIG_USB=y
|
||||||
|
+CONFIG_USB_XHCI_HCD=y
|
||||||
|
+CONFIG_USB_XHCI_MTK=y
|
||||||
|
+CONFIG_USB_STORAGE=y
|
||||||
|
+CONFIG_LZO=y
|
||||||
|
+CONFIG_ZSTD=y
|
||||||
|
+CONFIG_HEXDUMP=y
|
||||||
@@ -68,6 +68,7 @@ glinet,gl-mt2500-airoha|\
|
|||||||
glinet,gl-mt6000|\
|
glinet,gl-mt6000|\
|
||||||
glinet,gl-x3000|\
|
glinet,gl-x3000|\
|
||||||
glinet,gl-xe3000|\
|
glinet,gl-xe3000|\
|
||||||
|
globitel,bt-r320|\
|
||||||
huasifei,wh3000|\
|
huasifei,wh3000|\
|
||||||
nradio,c8-668gl)
|
nradio,c8-668gl)
|
||||||
ubootenv_add_mmc "u-boot-env" "" "0x0" "0x80000"
|
ubootenv_add_mmc "u-boot-env" "" "0x0" "0x80000"
|
||||||
|
|||||||
@@ -0,0 +1,222 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include <dt-bindings/leds/common.h>
|
||||||
|
|
||||||
|
#include "mt7981b.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Globitel BT-R320";
|
||||||
|
compatible = "globitel,bt-r320", "mediatek,mt7981";
|
||||||
|
|
||||||
|
aliases {
|
||||||
|
serial0 = &uart0;
|
||||||
|
label-mac-device = &gmac0;
|
||||||
|
};
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
bootargs = "root=PARTLABEL=rootfs rootwait";
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
memory@40000000 {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0 0x40000000 0 0x40000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
gpio-keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
|
||||||
|
button-wps {
|
||||||
|
label = "wps";
|
||||||
|
linux,code = <KEY_WPS_BUTTON>;
|
||||||
|
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
button-reset {
|
||||||
|
label = "reset";
|
||||||
|
linux,code = <KEY_RESTART>;
|
||||||
|
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
gpio-leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
led-0 {
|
||||||
|
function = LED_FUNCTION_WLAN_2GHZ;
|
||||||
|
color = <LED_COLOR_ID_GREEN>;
|
||||||
|
gpios = <&pio 34 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,default-trigger = "phy0tpt";
|
||||||
|
};
|
||||||
|
|
||||||
|
led-1 {
|
||||||
|
function = LED_FUNCTION_WLAN_5GHZ;
|
||||||
|
color = <LED_COLOR_ID_GREEN>;
|
||||||
|
gpios = <&pio 35 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,default-trigger = "phy1tpt";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
ð {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
gmac0: mac@0 {
|
||||||
|
compatible = "mediatek,eth-mac";
|
||||||
|
reg = <0>;
|
||||||
|
phy-mode = "2500base-x";
|
||||||
|
nvmem-cells = <&macaddr_factory_2a 0>;
|
||||||
|
nvmem-cell-names = "mac-address";
|
||||||
|
fixed-link {
|
||||||
|
speed = <2500>;
|
||||||
|
full-duplex;
|
||||||
|
pause;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio: mdio-bus {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
switch@0 {
|
||||||
|
compatible = "mediatek,mt7531";
|
||||||
|
reg = <31>;
|
||||||
|
reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <1>;
|
||||||
|
interrupt-parent = <&pio>;
|
||||||
|
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
|
||||||
|
ports {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
port@1 {
|
||||||
|
reg = <1>;
|
||||||
|
label = "lan1";
|
||||||
|
};
|
||||||
|
|
||||||
|
port@2 {
|
||||||
|
reg = <2>;
|
||||||
|
label = "lan2";
|
||||||
|
};
|
||||||
|
|
||||||
|
port@3 {
|
||||||
|
reg = <3>;
|
||||||
|
label = "lan3";
|
||||||
|
};
|
||||||
|
|
||||||
|
port@4 {
|
||||||
|
reg = <4>;
|
||||||
|
label = "wan";
|
||||||
|
nvmem-cells = <&macaddr_factory_24 0>;
|
||||||
|
nvmem-cell-names = "mac-address";
|
||||||
|
};
|
||||||
|
|
||||||
|
port@6 {
|
||||||
|
reg = <6>;
|
||||||
|
label = "cpu";
|
||||||
|
ethernet = <&gmac0>;
|
||||||
|
phy-mode = "2500base-x";
|
||||||
|
fixed-link {
|
||||||
|
speed = <2500>;
|
||||||
|
full-duplex;
|
||||||
|
pause;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&mmc0 {
|
||||||
|
status = "okay";
|
||||||
|
pinctrl-names = "default", "state_uhs";
|
||||||
|
pinctrl-0 = <&mmc0_pins_default>;
|
||||||
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
||||||
|
bus-width = <8>;
|
||||||
|
max-frequency = <52000000>;
|
||||||
|
vmmc-supply = <®_3p3v>;
|
||||||
|
cap-mmc-highspeed;
|
||||||
|
non-removable;
|
||||||
|
no-sd;
|
||||||
|
no-sdio;
|
||||||
|
|
||||||
|
card@0 {
|
||||||
|
compatible = "mmc-card";
|
||||||
|
reg = <0>;
|
||||||
|
|
||||||
|
block {
|
||||||
|
compatible = "block-device";
|
||||||
|
|
||||||
|
partitions {
|
||||||
|
block-partition-factory {
|
||||||
|
partname = "factory";
|
||||||
|
|
||||||
|
nvmem-layout {
|
||||||
|
compatible = "fixed-layout";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
eeprom_factory_0: eeprom@0 {
|
||||||
|
reg = <0x0 0x1000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
macaddr_factory_24: macaddr@24 {
|
||||||
|
compatible = "mac-base";
|
||||||
|
reg = <0x24 0x6>;
|
||||||
|
#nvmem-cell-cells = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
macaddr_factory_2a: macaddr@2a {
|
||||||
|
compatible = "mac-base";
|
||||||
|
reg = <0x2a 0x6>;
|
||||||
|
#nvmem-cell-cells = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pio {
|
||||||
|
mmc0_pins_default: mmc0-pins-default {
|
||||||
|
mux {
|
||||||
|
function = "flash";
|
||||||
|
groups = "emmc_45";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
mmc0_pins_uhs: mmc0-pins-uhs {
|
||||||
|
mux {
|
||||||
|
function = "flash";
|
||||||
|
groups = "emmc_45";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart0 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&watchdog {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&wifi {
|
||||||
|
nvmem-cells = <&eeprom_factory_0>;
|
||||||
|
nvmem-cell-names = "eeprom";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb_phy {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&xhci {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
@@ -53,6 +53,7 @@ mediatek_setup_interfaces()
|
|||||||
creatlentem,clt-r30b1|\
|
creatlentem,clt-r30b1|\
|
||||||
creatlentem,clt-r30b1-112m|\
|
creatlentem,clt-r30b1-112m|\
|
||||||
cudy,wr3000-v1|\
|
cudy,wr3000-v1|\
|
||||||
|
globitel,bt-r320|\
|
||||||
jcg,q30-pro|\
|
jcg,q30-pro|\
|
||||||
keenetic,kn-3711|\
|
keenetic,kn-3711|\
|
||||||
keenetic,kn-3811|\
|
keenetic,kn-3811|\
|
||||||
|
|||||||
@@ -126,6 +126,11 @@ case "$board" in
|
|||||||
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||||
;;
|
;;
|
||||||
|
globitel,bt-r320)
|
||||||
|
addr=$(mmc_get_mac_binary factory 0x4)
|
||||||
|
[ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress
|
||||||
|
[ "$PHYNBR" = "1" ] && macaddr_setbit_la "$addr" > /sys${DEVPATH}/macaddress
|
||||||
|
;;
|
||||||
h3c,magic-nx30-pro)
|
h3c,magic-nx30-pro)
|
||||||
addr=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
|
addr=$(mtd_get_mac_ascii pdt_data_1 ethaddr)
|
||||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||||
|
|||||||
@@ -196,6 +196,7 @@ platform_do_upgrade() {
|
|||||||
glinet,gl-mt6000|\
|
glinet,gl-mt6000|\
|
||||||
glinet,gl-x3000|\
|
glinet,gl-x3000|\
|
||||||
glinet,gl-xe3000|\
|
glinet,gl-xe3000|\
|
||||||
|
globitel,bt-r320|\
|
||||||
huasifei,wh3000|\
|
huasifei,wh3000|\
|
||||||
huasifei,wh3000-pro-emmc|\
|
huasifei,wh3000-pro-emmc|\
|
||||||
smartrg,sdg-8612|\
|
smartrg,sdg-8612|\
|
||||||
@@ -435,6 +436,7 @@ platform_copy_config() {
|
|||||||
glinet,gl-mt6000|\
|
glinet,gl-mt6000|\
|
||||||
glinet,gl-x3000|\
|
glinet,gl-x3000|\
|
||||||
glinet,gl-xe3000|\
|
glinet,gl-xe3000|\
|
||||||
|
globitel,bt-r320|\
|
||||||
huasifei,wh3000|\
|
huasifei,wh3000|\
|
||||||
huasifei,wh3000-pro-emmc|\
|
huasifei,wh3000-pro-emmc|\
|
||||||
jdcloud,re-cp-03|\
|
jdcloud,re-cp-03|\
|
||||||
|
|||||||
@@ -1770,6 +1770,29 @@ define Device/glinet_gl-xe3000
|
|||||||
endef
|
endef
|
||||||
TARGET_DEVICES += glinet_gl-xe3000
|
TARGET_DEVICES += glinet_gl-xe3000
|
||||||
|
|
||||||
|
define Device/globitel_bt-r320
|
||||||
|
DEVICE_VENDOR := Globitel
|
||||||
|
DEVICE_MODEL := BT-R320
|
||||||
|
DEVICE_DTS := mt7981b-globitel-bt-r320
|
||||||
|
DEVICE_DTS_DIR := ../dts
|
||||||
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware f2fsck mkf2fs
|
||||||
|
KERNEL_LOADADDR := 0x44000000
|
||||||
|
KERNEL := kernel-bin | lzma
|
||||||
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||||
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||||
|
KERNEL_INITRAMFS_SUFFIX := -initramfs-recovery.itb
|
||||||
|
IMAGES := sysupgrade.itb
|
||||||
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
||||||
|
IMAGE/sysupgrade.itb := append-kernel | \
|
||||||
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
|
||||||
|
pad-rootfs | append-metadata
|
||||||
|
ARTIFACTS := gpt.bin preloader.bin bl31-uboot.fip
|
||||||
|
ARTIFACT/gpt.bin := mt798x-gpt emmc
|
||||||
|
ARTIFACT/preloader.bin := mt7981-bl2 emmc-ddr4
|
||||||
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot globitel_bt-r320
|
||||||
|
endef
|
||||||
|
TARGET_DEVICES += globitel_bt-r320
|
||||||
|
|
||||||
define Device/h3c_magic-nx30-pro
|
define Device/h3c_magic-nx30-pro
|
||||||
DEVICE_VENDOR := H3C
|
DEVICE_VENDOR := H3C
|
||||||
DEVICE_MODEL := Magic NX30 Pro
|
DEVICE_MODEL := Magic NX30 Pro
|
||||||
|
|||||||
Reference in New Issue
Block a user