openwrt-mirror/openwrt
1
0 Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2026-10-14 15:17:37 +04:00
Code Issues Packages Projects Releases Wiki Activity

mediatek: creatlentem clt-r30b1: add all-in-UBI layout

Browse Source 
This commit introduces OpenWrt U-Boot all-in-ubi layout support
for the CreatLentem CLT-R30B1, enabling:
- Fully-featured U-Boot
- Effective recovery mechanisms
- Prolonged device lifetime by allocating most of the flash
  to UBI (which takes care of wear-leveling)
- Maximum available storage space for OpenWrt
- Unified firmware across different device variants

OpenWrt U-Boot UBI flash instructions
-------------------------------------

Using the installer image
-------------------------
To simplify the installation process, this method uses a fork
of Daniel Golle's (@dangowrt) UBI Installer
https://github.com/dangowrt/owrt-ubi-installer

1. Ensure your router is running the latest generic OpenWrt firmware.
   Upgrade it if necessary.
2. Obtain the installer image:
   Build the installer from source
   https://github.com/andros-ua/owrt-ubi-installer/tree/clt-r30b1
   or download a prebuilt image from the
   https://github.com/andros-ua/owrt-ubi-installer/releases
3. Flash the openwrt*creatlentem_clt-r30b1-ubi-initramfs-recovery-installer.itb
   image using sysupgrade.
4. Wait for installation: the green status LED will blink rapidly,
   indicating that the all-in-UBI installer is running.
5. Once the installation finishes,
   the status LED will turn solid white (lime) for 5 seconds.
6. After the device reboots, perform a final sysupgrade using the
   openwrt*creatlentem_clt-r30b1-ubi-squashfs-sysupgrade.itb image.

Return to stock layout
----------------------
1. Flash openwrt*creatlentem_clt-r30b1(-112m)-initramfs-kernel.bin
   via sysupgrade
2. Copy files to /tmp on the device via SCP:
   BL2.bin
   u-boot-env.bin
   Factory.bin
   FIP.bin
   openwrt*creatlentem_clt-r30b1(-112m)-squashfs-sysupgrade.bin
3. Restore stock MTD partitions:
   apk add kmod-mtd-rw
   insmod mtd-rw i_want_a_brick=1
   mtd write /tmp/BL2.bin BL2
   mtd write /tmp/u-boot-env.bin u-boot-env
   mtd write /tmp/Factory.bin Factory
   mtd write /tmp/FIP.bin FIP
4. Install the system:
   sysupgrade /tmp/*sysupgrade.bin

Recovery
--------
Use mtk_uartboot to recover corrupted BL2 or FIP via UART:
https://github.com/981213/mtk_uartboot

Stock layout
----------------------------------------
| dev:    size   erasesize  name       |
| mtd0: 00100000 00020000 "BL2"        |
| mtd1: 00080000 00020000 "u-boot-env" |
| mtd2: 00200000 00020000 "Factory"    |
| mtd3: 00200000 00020000 "FIP"        |
| mtd4: 07000000 00020000 "ubi"        |
----------------------------------------

OpenWrt U-Boot UBI layout
----------------------------------
| dev:    size   erasesize  name |
| mtd0: 00100000 00020000 "BL2"  |
| mtd1: 07f00000 00020000 "ubi"  |
----------------------------------

Signed-off-by: Andrii Kuiukoff <andros.ua@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20666
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
This commit is contained in:
Andrii Kuiukoff authored and Jonas Jelonek committed 2026-06-17 09:09:25 +02:00
1 parent 38aa2fa410
commit e414ca4fa6
10 files changed
+468 -17
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

package/boot/uboot-mediatek/Makefile
+13
View File
@@ -317,6 +317,18 @@ define U-Boot/mt7981_comfast_cf-wr632ax
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3-1866
endef
define U-Boot/mt7981_creatlentem_clt-r30b1-ubi
NAME:=CreatLentem CLT-R30B1 (UBI)
BUILD_SUBTARGET:=filogic
BUILD_DEVICES:=creatlentem_clt-r30b1-ubi
UBOOT_CONFIG:=mt7981_creatlentem_clt-r30b1-ubi
UBOOT_IMAGE:=u-boot.fip
BL2_BOOTDEV:=spim-nand-ubi
BL2_SOC:=mt7981
BL2_DDRTYPE:=ddr3-1866
DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ubi-ddr3-1866
endef
define U-Boot/mt7981_cudy_tr3000-v1
NAME:=Cudy TR3000 v1
BUILD_SUBTARGET:=filogic
@@ -1247,6 +1259,7 @@ UBOOT_TARGETS := \
mt7981_cmcc_rax3000m-nand-ddr3 \
mt7981_cmcc_rax3000m-nand-ddr4 \
mt7981_comfast_cf-wr632ax \
mt7981_creatlentem_clt-r30b1-ubi \
mt7981_cudy_tr3000-v1 \
mt7981_cudy_wbr3000uax-v1 \
mt7981_cudy_wr3000e-v1 \
package/boot/uboot-mediatek/patches/473-add-creatlentem_clt-r30b1-ubi.patch
+315
View File
@@ -0,0 +1,315 @@
--- /dev/null
+++ b/configs/mt7981_creatlentem_clt-r30b1-ubi_defconfig
@@ -0,0 +1,112 @@
+CONFIG_ARM=y
+CONFIG_ARM_SMCCC=y
+CONFIG_SYS_HAS_NONCACHED_MEMORY=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_TEXT_BASE=0x41e00000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="mt7981-creatlentem-clt-r30b1-ubi"
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_TARGET_MT7981=y
+CONFIG_SYS_LOAD_ADDR=0x46000000
+CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
+CONFIG_DEBUG_UART_BASE=0x11002000
+CONFIG_DEBUG_UART_CLOCK=40000000
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+CONFIG_BOOTDELAY=30
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_MENU_SHOW=y
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="mt7981-creatlentem-clt-r30b1-ubi"
+CONFIG_LOGLEVEL=7
+CONFIG_PRE_CONSOLE_BUFFER=y
+CONFIG_LOG=y
+# CONFIG_BOARD_INIT is not set
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="MT7981> "
+CONFIG_CMD_CPU=y
+CONFIG_CMD_LICENSE=y
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_ENV_FLAGS=y
+CONFIG_CMD_RNG=y
+CONFIG_CMD_STRINGS=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_TFTPSRV=y
+CONFIG_CMD_RARP=y
+CONFIG_CMD_CDP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_LINK_LOCAL=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_PXE=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_PSTORE=y
+CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
+CONFIG_CMD_UUID=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_UBI=y
+CONFIG_CMD_UBI_RENAME=y
+CONFIG_OF_EMBED=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_UBI=y
+CONFIG_ENV_REDUNDANT=y
+CONFIG_ENV_UBI_PART="ubi"
+CONFIG_ENV_UBI_VOLUME="ubootenv"
+CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
+CONFIG_ENV_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y
+CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/creatlentem_clt-r30b1-ubi_env"
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_NETCONSOLE=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.1.1"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.1.254"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_BUTTON=y
+CONFIG_BUTTON_GPIO=y
+CONFIG_CLK=y
+CONFIG_GPIO_HOG=y
+CONFIG_LED=y
+CONFIG_LED_BLINK=y
+CONFIG_LED_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_PHY_FIXED=y
+CONFIG_MEDIATEK_ETH=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_MT7981=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_MTK_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_RAM=y
+CONFIG_DM_RNG=y
+CONFIG_RNG_MTK_V2=y
+CONFIG_DM_SERIAL=y
+CONFIG_MTK_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MTK_SPIM=y
+CONFIG_ZSTD=y
+CONFIG_HEXDUMP=y
--- /dev/null
+++ b/defenvs/creatlentem_clt-r30b1-ubi_env
@@ -0,0 +1,54 @@
+ipaddr=192.168.1.1
+serverip=192.168.1.254
+loadaddr=0x46000000
+console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
+bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
+bootconf=config-1
+bootdelay=0
+bootfile=openwrt-mediatek-filogic-creatlentem_clt-r30b1-ubi-initramfs-recovery.itb
+bootfile_bl2=openwrt-mediatek-filogic-creatlentem_clt-r30b1-ubi-preloader.bin
+bootfile_fip=openwrt-mediatek-filogic-creatlentem_clt-r30b1-ubi-bl31-uboot.fip
+bootfile_upg=openwrt-mediatek-filogic-creatlentem_clt-r30b1-ubi-squashfs-sysupgrade.itb
+bootled_pwr=red:status
+bootled_rec=green:status
+bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
+bootmenu_default=0
+bootmenu_delay=0
+bootmenu_title= ( ( ( OpenWrt ) ) )
+bootmenu_0=Initialize environment.=run _firstboot
+bootmenu_0d=Run default boot command.=run boot_default
+bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
+bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
+bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
+bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
+bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
+bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return
+bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
+bootmenu_8=Reboot.=reset
+bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
+boot_first=if button reset ; then led $bootled_pwr off ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
+boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
+boot_production=led $bootled_rec off ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
+boot_recovery=led $bootled_pwr off ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
+boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
+boot_tftp_forever=led $bootled_pwr off ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
+boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
+boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
+boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
+boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory
+boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
+preboot=led $bootled_pwr on ; led $bootled_rec on
+reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data
+mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
+ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic
+ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
+ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
+ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
+ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
+ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000
+ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
+ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
+_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
+_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
+_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
+_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"
--- /dev/null
+++ b/arch/arm/dts/mt7981-creatlentem-clt-r30b1-ubi.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+#include "mt7981.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+ model = "CreatLentem CLT-R30B1 (UBI)";
+ compatible = "creatlentem,clt-r30b1-ubi", "mediatek,mt7981";
+
+ chosen {
+ stdout-path = &uart0;
+ tick-timer = &timer0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x10000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ button-wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ led_status_green: led-0 {
+ label = "green:status";
+ gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_red: led-1 {
+ label = "red:status";
+ gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&eth {
+ status = "okay";
+ mediatek,gmac-id = <0>;
+ phy-mode = "2500base-x";
+ mediatek,switch = "mt7531";
+ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+};
+
+&pio {
+ spi_flash_pins: spi0-pins-func-1 {
+ mux {
+ function = "flash";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <MTK_DRIVE_4mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+
+ line_8-hog {
+ gpio-hog;
+ gpios = <8 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "LEDs power";
+ };
+};
+
+&spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ status = "okay";
+ must_tx;
+ enhance_timing;
+ dma_ext;
+ ipm_design;
+ support_quad;
+ tick_dly = <2>;
+ sample_sel = <0>;
+
+ spi_nand@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "ubi";
+ reg = <0x100000 0x7f00000>;
+ compatible = "linux,ubi";
+ };
+ };
+ };
+};
+
+&uart0 {
+ mediatek,force-highspeed;
+ status = "okay";
+};
+
+&watchdog {
+ status = "disabled";
+};
package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic
+1
View File
@@ -27,6 +27,7 @@ acer,predator-w6x-ubootmod|\
asus,zenwifi-bt8-ubootmod|\
cmcc,a10-ubootmod|\
comfast,cf-wr632ax-ubootmod|\
creatlentem,clt-r30b1-ubi|\
cudy,tr3000-v1-ubootmod|\
cudy,wbr3000uax-v1-ubootmod|\
cudy,wr3000e-v1-ubootmod|\
target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-112m.dts
+8 -5
View File
@@ -7,9 +7,12 @@
compatible = "creatlentem,clt-r30b1-112m", "mediatek,mt7981";
};
&partitions {
partition@580000 {
label = "ubi";
reg = <0x0580000 0x7000000>;
};
&spi_nand {
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
};
&ubi {
reg = <0x0580000 0x7000000>;
};
target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-common.dtsi
+6 -6
View File
@@ -17,7 +17,7 @@
serial0 = &uart0;
};
chosen {
chosen: chosen {
stdout-path = "serial0:115200n8";
};
@@ -109,7 +109,7 @@
pinctrl-0 = <&spi0_flash_pins>;
status = "okay";
spi_nand@0 {
spi_nand: spi-nand@0 {
compatible = "spi-nand";
reg = <0>;
@@ -124,10 +124,6 @@
spi-cal-addrlen = <5>;
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
partitions: partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
@@ -183,6 +179,10 @@
reg = <0x380000 0x200000>;
read-only;
};
ubi: partition@580000 {
label = "ubi";
};
};
};
};
target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-ubi.dts
+89
View File
@@ -0,0 +1,89 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7981b-creatlentem-clt-r30b1-common.dtsi"
/ {
model = "CreatLentem CLT-R30B1 (UBI)";
compatible = "creatlentem,clt-r30b1-ubi", "mediatek,mt7981";
};
&chosen {
bootargs = "root=/dev/fit0 rootwait";
rootdisk = <&ubi_rootdisk>;
};
/delete-node/ &partitions;
&spi_nand {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bl2";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "ubi";
reg = <0x100000 0x7f00000>;
compatible = "linux,ubi";
volumes {
ubi_factory: ubi-volume-factory {
volname = "factory";
};
ubi_rootdisk: ubi-volume-fit {
volname = "fit";
};
ubi-volume-ubootenv {
volname = "ubootenv";
nvmem-layout {
compatible = "u-boot,env-redundant-bool";
};
};
ubi-volume-ubootenv2 {
volname = "ubootenv2";
nvmem-layout {
compatible = "u-boot,env-redundant-bool";
};
};
};
};
};
};
&ubi_factory {
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x1000>;
};
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
compatible = "mac-base";
#nvmem-cell-cells = <1>;
};
macaddr_factory_24: macaddr@24 {
compatible = "mac-base";
reg = <0x24 0x6>;
#nvmem-cell-cells = <1>;
};
macaddr_factory_2a: macaddr@2a {
compatible = "mac-base";
reg = <0x2a 0x6>;
#nvmem-cell-cells = <1>;
};
};
};
target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1.dts
+10 -5
View File
@@ -8,13 +8,18 @@
};
&partitions {
partition@580000 {
label = "ubi";
reg = <0x0580000 0x4000000>;
};
partition@4580000 {
label = "data";
reg = <0x4580000 0x2000000>;
};
};
&spi_nand {
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <64>;
};
&ubi {
reg = <0x0580000 0x4000000>;
};
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+1
View File
@@ -56,6 +56,7 @@ mediatek_setup_interfaces()
confiabits,mt7981|\
creatlentem,clt-r30b1|\
creatlentem,clt-r30b1-112m|\
creatlentem,clt-r30b1-ubi|\
cudy,wr3000-v1|\
globitel,bt-r320|\
huasifei,wh3000r-nand|\
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+2
View File
@@ -147,6 +147,7 @@ platform_do_upgrade() {
cmcc,a10-ubootmod|\
cmcc,rax3000m|\
comfast,cf-wr632ax-ubootmod|\
creatlentem,clt-r30b1-ubi|\
cudy,tr3000-v1-ubootmod|\
cudy,wbr3000uax-v1-ubootmod|\
cudy,wr3000e-v1-ubootmod|\
@@ -360,6 +361,7 @@ platform_check_image() {
cmcc,a10-ubootmod|\
cmcc,rax3000m|\
comfast,cf-wr632ax-ubootmod|\
creatlentem,clt-r30b1-ubi|\
cudy,tr3000-v1-ubootmod|\
cudy,wbr3000uax-v1-ubootmod|\
cudy,wr3000e-v1-ubootmod|\
target/linux/mediatek/image/filogic.mk
+23 -1
View File
@@ -1079,7 +1079,6 @@ define Device/creatlentem_clt-r30b1-common
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_IN_UBI := 1
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/creatlentem_clt-r30b1-112m
@@ -1090,6 +1089,7 @@ define Device/creatlentem_clt-r30b1-112m
DEVICE_DTS := mt7981b-creatlentem-clt-r30b1-112m
SUPPORTED_DEVICES += clt,r30b1 clt,r30b1-112m
IMAGE_SIZE := 114688k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
$(call Device/creatlentem_clt-r30b1-common)
endef
TARGET_DEVICES += creatlentem_clt-r30b1-112m
@@ -1098,10 +1098,32 @@ define Device/creatlentem_clt-r30b1
DEVICE_DTS := mt7981b-creatlentem-clt-r30b1
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
IMAGE_SIZE := 65536k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
$(call Device/creatlentem_clt-r30b1-common)
endef
TARGET_DEVICES += creatlentem_clt-r30b1
define Device/creatlentem_clt-r30b1-ubi
DEVICE_VARIANT := (UBI)
DEVICE_ALT0_VARIANT := (UBI)
DEVICE_ALT1_VARIANT := (UBI)
DEVICE_ALT2_VARIANT := (UBI)
DEVICE_DTS := mt7981b-creatlentem-clt-r30b1-ubi
UBOOTENV_IN_UBI := 1
IMAGES := sysupgrade.itb
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
KERNEL := kernel-bin | gzip
KERNEL_INITRAMFS := kernel-bin | lzma | \
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
IMAGE/sysupgrade.itb := append-kernel | \
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
ARTIFACTS := preloader.bin bl31-uboot.fip
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ubi-ddr3-1866
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot creatlentem_clt-r30b1-ubi
$(call Device/creatlentem_clt-r30b1-common)
endef
TARGET_DEVICES += creatlentem_clt-r30b1-ubi
define Device/cudy_ap3000outdoor-v1
DEVICE_VENDOR := Cudy
DEVICE_MODEL := AP3000 Outdoor