diff --git a/target/linux/realtek/dts/rtl9303_ubnt_usw-aggregation.dts b/target/linux/realtek/dts/rtl9303_ubnt_usw-aggregation.dts new file mode 100644 index 00000000000..ed0284de8bf --- /dev/null +++ b/target/linux/realtek/dts/rtl9303_ubnt_usw-aggregation.dts @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rtl930x.dtsi" + +#include +#include +#include + +/ { + compatible = "ubnt,usw-aggregation", "realtek,rtl9303-soc"; + model = "UniFi USW Aggregation"; + + aliases { + label-mac-device = ðernet0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_enable_led_sync>; + }; + + led_set { + compatible = "realtek,rtl9300-leds"; + active-low; + + led_set0 = <(RTL93XX_LED_SET_10G | RTL93XX_LED_SET_5G | RTL93XX_LED_SET_2P5G | + RTL93XX_LED_SET_1G | RTL93XX_LED_SET_100M | RTL93XX_LED_SET_10M | + RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT) + RTL93XX_LED_SET_NONE>; + }; + + sfp0: sfp-p1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio2 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + sfp1: sfp-p2 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; + }; + + sfp2: sfp-p3 { + compatible = "sff,sfp"; + i2c-bus = <&i2c2>; + los-gpio = <&gpio2 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; + }; + + sfp3: sfp-p4 { + compatible = "sff,sfp"; + i2c-bus = <&i2c3>; + los-gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + }; + + sfp4: sfp-p5 { + compatible = "sff,sfp"; + i2c-bus = <&i2c4>; + los-gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + }; + + sfp5: sfp-p6 { + compatible = "sff,sfp"; + i2c-bus = <&i2c5>; + los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; + + sfp6: sfp-p7 { + compatible = "sff,sfp"; + i2c-bus = <&i2c6>; + los-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 10 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + sfp7: sfp-p8 { + compatible = "sff,sfp"; + i2c-bus = <&i2c7>; + los-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio1 14 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c_mst1 { + status = "okay"; + + i2c0: i2c@0 { reg = <0>; }; + i2c1: i2c@1 { reg = <1>; }; + i2c2: i2c@2 { reg = <2>; }; + i2c3: i2c@3 { reg = <3>; }; + i2c4: i2c@4 { + reg = <4>; + + gpio1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio2: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + i2c5: i2c@5 { reg = <5>; }; + i2c6: i2c@6 { reg = <6>; }; + i2c7: i2c@7 { reg = <7>; }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xa0000>; + read-only; + }; + + partition@a0000 { + label = "u-boot-env"; + reg = <0xa0000 0x10000>; + }; + + partition@b0000 { + compatible = "openwrt,uimage", "denx,uimage"; + label = "firmware"; + reg = <0xb0000 0xe20000>; + }; + + /* this partition contains data used by U-boot and UniFi OS + * e.g. the bootpartition selector. + */ + partition@ed0000 { + label = "reserved"; + reg = <0xed0000 0x10000>; + }; + + partition@ee0000 { + label = "cdata"; + reg = <0xee0000 0x10000>; + }; + + partition@ef0000 { + label = "cfg"; + reg = <0xef0000 0x100000>; + }; + + partition@ff0000 { + label = "eeprom"; + reg = <0xff0000 0x10000>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + factory_macaddr: macaddr@0 { + compatible = "mac-base"; + reg = <0x0 0x6>; + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; +}; + +&gpio0 { + /* + * Lines 5/6 are wired to the front-panel STM32 MCU that drives + * the touch display: + * 5 = BOOT0 select (low: run firmware from flash, + * high: system bootloader / DFU) + * 6 = reset (active low) + * Named only, not claimed, so userspace can drive them. + */ + gpio-line-names = "", "", "", "", "", "lcm-mode", "lcm-reset"; +}; + +ðernet0 { + nvmem-cells = <&factory_macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + SWITCH_PORT_SFP(20, 1, 5, 0, 0) + SWITCH_PORT_SFP(16, 2, 4, 0, 1) + SWITCH_PORT_SFP(25, 3, 7, 0, 2) + SWITCH_PORT_SFP(24, 4, 6, 0, 3) + SWITCH_PORT_SFP(27, 5, 9, 0, 4) + SWITCH_PORT_SFP(26, 6, 8, 0, 5) + SWITCH_PORT_SFP(8, 7, 3, 0, 6) + SWITCH_PORT_SFP(0, 8, 2, 0, 7) + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart1 { + status = "okay"; + + /* front touch display MCU reachable here */ +}; diff --git a/target/linux/realtek/image/rtl930x.mk b/target/linux/realtek/image/rtl930x.mk index 7e78b63ff9a..a1f8848efe1 100644 --- a/target/linux/realtek/image/rtl930x.mk +++ b/target/linux/realtek/image/rtl930x.mk @@ -85,6 +85,15 @@ define Device/tplink_tl-st1008f-v2 endef TARGET_DEVICES += tplink_tl-st1008f-v2 +define Device/ubnt_usw-aggregation + SOC := rtl9303 + DEVICE_VENDOR := Ubiquiti + DEVICE_MODEL := UniFi USW Aggregation + IMAGE_SIZE := 14464k + $(Device/kernel-lzma) +endef +TARGET_DEVICES += ubnt_usw-aggregation + define Device/vimin_vm-s100-0800ms SOC := rtl9303 UIMAGE_MAGIC := 0x93000000