The internal PHYs of the QCA8327/8334/8337 switches are handled by the
qca83xx PHY driver. Without it they silently fall back to genphy and
lose the chip-specific setup and fixups. Every device using
kmod-dsa-qca8k already pulls it in manually except the MikroTik
RB960PGS, which was missing it.
Add the dependency, like other DSA packages do with their PHY drivers,
and drop the now-redundant device package entries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25767
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rename the switch, port and PHY nodes to match the upstream device
tree binding names for the qca8k driver. The switch PHYs already live
on the external MDIO bus, so no functional change.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25188
Signed-off-by: Jonas Jelonek <jonas@jonasjelonek.de>
Remove userspace handling for the wifi MAC as nvmem is available to
handle this.
Add label-mac-device support for similar reasons. The ethaddr MAC shows
up on the label on the device.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/24699
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
We also need to refresh the 6.12 kernel patches.
Fixes: 87940bfc69 ("mpc85xx: relocate simpleImage for WS-AP3710i")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
The initramfs image for Snapshots exceed the available space when
booting.
Relocate the simpleImage loader to a different offset to fix booting the
initramfs.
Signed-off-by: David Bauer <mail@david-bauer.net>
Use upstream solution for managing GPIO power for USB devices.
A small patch is needed to make the whole thing work as this is an older
USB driver that does not use the PHY framework.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16842
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
strlcat takes the total buffer size, not the remaining space.
Passing strlen(cmdline) + l caused it to truncate by one byte
when the appended string fit within the buffer.
This is also more consistent with the rest of the file.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23892
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
The TL-WDR4900v1, like many other similarly-aged TP-Link devices, is
using a flipswitch for toggling WiFi, not a pushbutton. Update the DTS
to reflect that. The debounce time used here has been chosen based on
other supported (but different target) TP-Link devices that are using
such a flipswitch.
Requires usage of the gpio-button-hotplug driver to work.
Fixes: #13552
Signed-off-by: Shine <4c.fce2@proton.me>
Tested-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/22494
Signed-off-by: Robert Marko <robimarko@gmail.com>
This replaces the standard Linux input subsystem with the
gpio-button-hotplug driver, which is already used with most other
targets for over a decade. While reducing overhead and resource
pressure especially for resource-constrained devices, this will
also allow for configuring things like flip-switches, in addition
to standard pushbuttons.
Will be required for a following commit.
Signed-off-by: Shine <4c.fce2@proton.me>
Tested-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/22494
Signed-off-by: Robert Marko <robimarko@gmail.com>
The simpleImage contains a payload already compressed with lzma-based
xz (by default), so further compressing it with lzma will often make
the result larger. On the contrary, compressing these simpleImages
with gzip can make the result smaller, so replace lzma with
libdeflate-gzip to compress kernel for ws-ap3715i.
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/23121
Signed-off-by: Robert Marko <robimarko@gmail.com>
find_mtd_part() outputs /dev/mtdblockX, to which fw_setenv cannot
write, "/dev/mtd$(find_mtd_index '<vol name>')" could be used instead.
The envsize should also be changed to 0x1000 to make the CRC checksum
valid and the env block recognized by the uboot-envtools, but the
flash sector size remains 0x10000, otherwise the env block will be
readable but not writable.
The "read-only" mark within device tree is also removed.
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/23121
Signed-off-by: Robert Marko <robimarko@gmail.com>
Convert the P2020RDB DTS to DSA for the VSC7385 switch, add port
labels and fixed-link. Update board network defaults, preinit iface,
and compat version, and include the DSA switch kmod in the image.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22161
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some mpc85xx boards still boot with failsafe configured on a non-LAN
interface. Align the preinit interface with the first DSA port or the
interface that LAN is connected to.
This makes failsafe reachable on devices where the default selection does
not map to the primary LAN port.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21516
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hardware specifications:
- CPU: Freescale/NXP P2020, dual-core PowerPC @ 1 GHz
- RAM: 1 GB DDR3
- Flash: 2 MB NOR, 512 MB NAND
- Networking: 7x Gigabit Ethernet ports (via two Marvell 88E6171
switches, each attached to a different MAC)
- USB: 2x USB 2.0 ports (front panel)
- mini-PCIe slot
- RTC: Ricoh RS5C372A
- 4 buttons (via external MCU)
- 3 LEDs (via external MCU)
- LCD display (via external MCU)
Installation procedure:
1. Obtain the original MAC address table from the stock bootlog, for
example:
setting device eth0 to 00:90:7f:00:00:01
setting device eth1 to 00:90:7f:00:00:02
setting device eth2 to 00:90:7f:00:00:03
setting device eth3 to 00:90:7f:00:00:04
setting device eth4 to 00:90:7f:00:00:05
setting device eth5 to 00:90:7f:00:00:06
setting device eth6 to 00:90:7f:00:00:07
2. Open the case and move jumper JP1 from 2-3 to 1-2 to enter FAILSAFE
mode.
3. Power on the device and interrupt the boot process to access the U-Boot
shell.
4. Program the MAC base address into the EEPROM (text after '#' is a
comment):
mac ports 3
mac 2 00:90:7f:00:00:01 # first MAC address from bootlog
mac save
5. Reset the device and enter the U-Boot console again.
6. Connect a TFTP server to port 6 and boot the initramfs image:
setenv ipaddr 192.168.1.3
setenv serverip 192.168.1.2
setenv loadaddr 1000000
tftpboot $loadaddr openwrt-mpc85xx-p2020-watchguard_xtm330-initramfs-kernel.bin
bootm $loadaddr
7. (Optional) Backup all MTD partitions if you want the ability to restore
stock firmware.
8. Perform a normal sysupgrade from the initramfs environment.
9. Power off the device and move jumper JP1 back to 2-3.
10. The device will now boot OpenWrt.
Known issues:
- LCD, buttons and LEDs are controlled by an external MCU; the protocol is
currently unknown.
- The internal connection between the two Marvell switches is unused by
OpenWrt.
- The stock firmware uses an empty U-Boot environment; saving variables
modifies the environment and prevents a normal boot. FAILSAFE U-Boot
remains functional.
- WatchGuard configuration is encrypted; DSA MAC addresses are stored in
this configuration.
- Failsafe Ethernet works on port1.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21020
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit adds support for the Watchguard Firebox models
T10-W, T15 and T15-W.
CPU: Freescale P1010
RAM: 512MB (T10) / 1024MB (T15)
Flash: 1MB SPI-NOR, 512MB NAND (T10) / 1024MB NAND (T15)
WiFi: 802.11abgn 2T2R AR9582 based Mini-PCIe card (-W models only)
Ethernet: 3x GBE (via AR8033 PHY)
LEDs: 7x hard-wired (6x LAN, 1x Power)
4x GPIO single-colored (Attn/Status/Mode/Failover)
1x GPIO dual-colored (2.4/5G WiFi, -W models only)
Serial: RJ45, Cisco pinout, 115200/8N1
Other: Battery backed RTC
Atmel TPM 1.2 chip (unsupported)
Based on 35f6d79, which introduced Watchguard Firebox T10 support.
The T10 and T15 are identical hardware, with the exception of the T15
having twice the flash and RAM size.
The T10-W and T15-W models have their Mini-PCIe slot populated with an ath9
(AR9582) based WiFi card. The slot is either unpopulated or empty for
non-WiFi models. All required drivers are present by default on the mpc85xx
target, so T10/T10-W resp. T15/T15-W can use the same OpenWrt image.
This commit also introduces the zImage loader from 7d768a9 to boot the
kernel. This is required, since the U-Boot version used in these devices
appears to have a hard limit of 16MB for the kernel size it can handle. The
current kernel size is around 17MB, though, due to kernel page alignment
required for memory protection.
Installation (replaces previous instructions for T10):
1. If the U-Boot password is known, proceed with step 2.
If the U-Boot password is unknown, dump the NOR flash using a SPI
programmer and patch the unknown password to a known one. You can use
blocktrron's Python script:
https://github.com/blocktrron/t10-uboot-patcher/
This script will patch the password to '1234' (without quotes).
Alternatively, you can search for the hashed password in the NOR dump
yourself and overwrite it with a known one. The SHA1 hash is:
E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA
Write the patched NOR dump back to the device.
2. Connect the device via serial cable, power it on and interrupt
the boot process by pressing Ctrl+C. Enter the U-Boot password to access
the CLI.
3. (Optional) Populate the uboot-env partition by entering:
saveenv
This will allow you to use uboot-envtools from within OpenWrt later,
e.g. to increase the loadable kernel size.
The default loadable kernel size is 5MB, the compressed kernel size at
the time of this commit is 3.1MB.
4. Serve the initramfs OpenWrt image from a TFTP server at 10.0.1.13/24,
connected to eth0 (WAN) of the device. File name must be 'uImage'. Boot
with:
tftpboot; bootm;
Make sure to use the correct image for your device (T10 resp. T15)!
5. After booting, connect to OpenWrt on eth1 (LAN) via SSH. Verify
that the UBI partiton is mtd7, format it and install the sysupgrade
image.
$ cat /proc/mtd
$ ubiformat /dev/mtd7 -y
$ sysupgrade -n <path to sysupgrade.bin>
6. The device should now boot OpenWrt from NAND flash. Enjoy.
Back to stock:
Use the vendor recovery procedure.
Stock recovery might also be necessary in case you have accidentally used
the fw_setenv command from within OpenWrt without using saveenv in U-Boot
first.
In order to use the vendor firmware recovery procedure, the NAND partitions
mtd3 to mtd6 must remain intact. Make sure not to overwrite them, or keep
dumps of them for later recovery.
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16776
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This partially reverts 78d259e7d2.
That commit broke mounting the root fs on Sophos RED 15w due to
partition size mismatch, and changed the partition sequence, causing
the OpenWrt partition numbers to change from mtd3:kernel/mtd4:ubi to
mtd4:kernel/mtd5:ubi.
Fixes: 78d259e7d2 ("mpc85xx: fix some dtc warnings")
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/20745
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Define MSM466 as alternative name, to explicitly show the device is
supported using existing image (MSM460). The only difference between
the MSM460 and MSM466 is that the MSM466 has external antenna.
Signed-off-by: Raylynn Knight <rayknight@me.com>
Link: https://github.com/openwrt/openwrt/pull/20937
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The initramfs images beginning 24.10 do not boot on the AP3825i. The
space available for decompression preceeding the compressed image is not
enough, crashing the system.
To make existing installation instructions continue to work, link the
loader at an address following the loadaddress of the U-Boot image.
Signed-off-by: David Bauer <mail@david-bauer.net>
Rosen PenevandClaude Opus 5.5
Josef Schlehofer
Shiji Yang
David Bauer
Shine
Edward Chow
Nick Hainke
Pawel Dembicki
Hauke Mehrtens
Stijn Tintel
Raylynn Knight
Álvaro Fernández Rojas