Commit Graph
1310 Commits
Author SHA1 Message Date
Robert Marko b5f32064ed ipq807x: add Qualcomm Atheros IPQ807x target
Qualcomm Atheros IPQ807x is a modern WiSoC featuring:
* Quad Core ARMv8 Cortex A-53
	* @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye
	* @ 1.4 GHz (IPQ8070A/1A) Codename Acorn
* Dual Band simultaneaous IEEE 802.11ax
	* 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A)
	* 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A)
	* 5G: 2x2/80MHz (IPQ8070A)
	* 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A)
	* 2G: 2x2/40MHz (IPQ8070A/1A)
* 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports)
* 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye
* 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn
* DDR3L/4 32/16 bit up to 2400MT/s
* SDIO 3.0/SD card 3.0/eMMC 5.1
* Dual USB 3.0
* One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane)
* Parallel NAND (ONFI)/LCD
* 6x QUP BLSP SPI/I2C/UART
* I2S, PCM, and TDMA
* HW PWM
* 1.8V configurable GPIO
* Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc)

Note that only v2 SOC models aka the ones ending with A suffix are
supported, v1 models do not comply to the final 802.11ax and have
lower clocks, lack the Gen3 PCIe etc.

SoC itself has two UBI32 cores for the NSS offloading system, however
currently no offloading is supported.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-16 12:42:23 +01:00
Robert Marko 5968290a21 kernel: package QRTR support
QRTR is Qualcomm IPC router protocol and ath11k requires it for both
AHB and PCI support, so package it as a kernel module so it can be
added as a dependency to the ath11k module.

Only kernel 5.15 is currently supported due to various things missing in
5.10 whose backporting is out of scope for this patch.

SMD, TUN and MHI variants are packaged.

SMD variant depends on the ipq807x
target as it has dependency on the RPMSG drivers which are Qualcomm
and SoC specific anyway.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2022-12-19 01:01:52 +01:00
Tony Butler 1e240f60a5 kernel: modules/lib-lz4: add lz4hc_compress
enable option `CONFIG_CRYPTO_LZ4HC` to match default kernel config

this only adds the `lz4hc_compress` module, and has no effect on the
`lz4_decompress` module which already supports any flavor

Signed-off-by: Tony Butler <spudz76@gmail.com>
2022-12-11 09:32:53 -08:00
Alexander Couzens 4943ce98ff kernel/module/iio: add TI am335x ADC driver
Add the iio driver for the embedded ADC in the
TI Sitara am335x SoCs.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2022-11-24 15:47:01 +00:00
Daniel Golle ebe2b7190b kernel: modules: package Marvell gigE PHY driver
Some copper SFP modules come with Marvell's 88E1xxx PHY and need this
module to function. Package it, so users can easily install this PHY
driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP.

Without marvell PHY driver:
sfp sfp2: module FINISAR CORP.    FCLF-8521-3-HC   rev A    sn XXXXXXX          dc XXXXXX
mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22
sfp sfp2: sfp_add_phy failed: -22

With marvell PHY driver:
sfp sfp2: module FINISAR CORP.    FCLF-8521-3-HC   rev A    sn XXXXXXX          dc XXXXXX
mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode
mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL)
mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-11-15 19:12:39 +00:00
Uwe Kleine-König cec9cbef44 kernel: add kmod-hwmon-sht3x support
The driver supports the temperature and humidity sensors chips SHT3x and
STS3x by Sensirion.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
2022-11-13 20:47:57 +01:00
Quintin Hill bc67c27283 kernel: support for Realtek USB bluetooth devices
USB adaptors with the RTL8761B chipset are cheap and readily available
but so far support is missing in Openwrt.  Enable the relevant kernel
options and add a module to the kmod-bluetooth package.  Increases size
of kmod-bluetooth ipk from 279140 bytes to 285320 bytes on my ath79 build.

Tested on a WNDR3700v4 with rtl8761bu firmware.

Signed-off-by: Quintin Hill <stuff@quintin.me.uk>
2022-11-12 17:05:13 +01:00
Rafał Miłecki b066ad7d9a kernel: improve description of NTFS kernel packages
This helps choosing the right NTFS driver from two available options.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-11-08 09:14:20 +01:00
Martin Schiller 1e028ac51e kernel: further cleanup of xfrm[4|6]_mode*
In my commit da5c45f4d8 ("kernel: remove handling of xfrm[4|6]_mode_*
modules") I missed a few default config options and description entries.
Those should be gone as well.

Fixes: da5c45f4d8 ("kernel: remove handling of xfrm[4|6]_mode_* modules")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2022-11-05 16:28:33 +01:00
Rafał Miłecki c3322cf04a kernel: sort filesystems symbols alphabetically
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-11-02 20:10:42 +01:00
Hauke Mehrtens 633f3e1118 kernel: Add kmod-drm-ttm-helper
Add a package for drm_ttm_helper.ko. CONFIG_DRM_TTM_HELPER is compiled
into the kernel on armvirt/64, x86/64, x86/generic and x86/legacy
because also some DRM drivers are compiled into the kernel. On x86/geode
it is not compiled into the kernel, but kmod-drm-amdgpu and
kmod-drm-radeon depend on it.

This fixes the x86/geode build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-11-01 14:47:14 +01:00
Martin Schiller da5c45f4d8 kernel: remove handling of xfrm[4|6]_mode_* modules
For kernel versions before 5.2, the required IPsec modes have to be
enabled explicitly (they are built-in for newer kernels).

Commit 1556ed155a ("kernel: mode_beet mode_transport mode_tunnel xfram
modules") tried to handle this, but it does not really work.

Since we don't support these kernel versions anymore and the code is
also broken, let's remove it.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[Remove old generic config options too]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-10-31 21:58:15 +01:00
Florian Eckert 1dccc6e749 kernel: replace gpio-mcp23s08 with pinctrl-mcp23s08*
The kernel module gpio-mcp23s08 has been replaced by the new
pinctrl-mcp23s08* kernel modules.

There are now 3 kernel modules for this device
- Common module for both I2C and SPI kmod-pinctrl-mcp23s08
- Module for I2C kmod-pinctrl-mcp23s08-i2c
- Module for SPI kmod-pinctrl-mcp23s08-spi

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-10-30 23:14:45 +01:00
Hauke Mehrtens b9b0407901 kernel: x86: Add glue_helper.ko only on kernel < 5.12
This module was removed with kernel 5.12.
This fixes the build of the x86 target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-10-22 02:31:57 +02:00
Daniel Golle e57ca876cc kernel: modules: iio: create and use AddDepends
Just like for other subsystems, create a reusable AddDepends call.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-10-19 23:20:42 +01:00
Nick Hainke 0ecb971a6f kernel: test for kernel version greater 5.13 to fix mmc-spi
The of_mmc_spi.o resource is provider agnostic in kernels greater 5.13
and does not depend anymore on CONFIG_OF [0].

[0] - https://github.com/torvalds/linux/commit/edd602146507532c1714d8428f654b87205f492e

Suggested-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-10-19 21:40:23 +02:00
Rafał Miłecki ad0731cc65 kernel: disable kmod-fs-ntfs3 for Linux 5.10
This new NTFS driver was added in kernel 5.15. Avoid building empty
package for kernel 5.10.

Fixes: bd0db6017b ("kernel: 5.15: add new module")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-10-19 07:07:14 +02:00
Felix Fietkau 2e375e9b31 kernel: remove hack patch, move kirkwood specific kmods to target modules.mk
Tweaking the KCONFIG line of kmod-ata-marvell-sata makes the hack patch
unnecessary

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-09-30 12:59:19 +02:00
Nicola Corna f089f7373e kernel: add VFIO kernel packages
Add kmod-vfio and kmod-vfio-pci packages.

Signed-off-by: Nicola Corna <nicola@corna.info>
2022-09-21 13:06:10 +02:00
Daniel Golle 8010d3da03 mediatek: build USB XHCI support as module
Instead of always including the XHCI driver in the kernel on all
MediaTek boards, selectively include the kernel module only on boards
which actually make use of USB functionality.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-14 20:26:58 +01:00
Kabuli Chana c3e4a0d99b kernel: netsupport: Add FQ-PIE as an optional sched kmod and extract PIE
add Flow Queuing with Proportional Integral controller Enhanced (FQ-PIE) as an
optional kmod in network support and extract sched-pie from kmod-sched to
allow dependency on just kmod-sched-pie (PIE).

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
2022-09-13 22:25:41 +02:00
Daniel Golle 4133102898 kernel: modules: package kmod-crypto-essiv
Package kernel module providing ESSIV support for block encryption.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-11 19:04:44 +01:00
Daniel Golle 964b822180 kernel: fix Aquantia AQtion Atlantic module dependencies
The buildbot revealed that
Package kmod-atlantic is missing dependencies for the following libraries:
hwmon.ko
macsec.ko
make[2]: *** [modules/netdevices.mk:1474: /builder/shared-workdir/build/bin/targets/mediatek/mt7629/packages/kmod-atlantic_5.15.67-1_arm_cortex-a7.ipk] Error 1
make[2]: Leaving directory '/builder/shared-workdir/build/package/kernel/linux'
time: package/kernel/linux/compile#43.51#17.03#415.37
    ERROR: package/kernel/linux failed to build.
make[1]: *** [package/Makefile:116: package/kernel/linux/compile] Error 1
make[1]: *** Waiting for unfinished jobs....

Add those missing dependencies to fix the build.

Fixes: d02e887d7c ("kernel: add Aquantia AQtion Atlantic 10Gbps Ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-10 18:23:14 +01:00
Mehdi Ahmadi d02e887d7c kernel: add Aquantia AQtion Atlantic 10Gbps Ethernet
Driver support for Aquantia AQtion Atlantic 10Gbps Ethernet NIC
with the AQC107, AQC108 and others chipsets found on:

 - TP-Link: TX401
 - Asus: XG-C100C, ROG Areion 10G NIC
 - & more ...

Successfully tested using a build with 22.03.0-rc6
(x86_64/EFI image) and the following outputs:

```
[    3.092053] pci 0000:06:00.0: [1d6a:07b1] type 00 class 0x020000
[    3.094983] pci 0000:06:00.0: reg 0x10: [mem 0x50800000-0x5080ffff 64bit]
[    3.098880] pci 0000:06:00.0: reg 0x18: [mem 0x50810000-0x50810fff 64bit]
[    3.108868] pci 0000:06:00.0: reg 0x20: [mem 0x50400000-0x507fffff 64bit]
[    3.108883] pci 0000:06:00.0: enabling Extended Tags
[    3.118874] pci 0000:06:00.0: supports D1 D2
[    3.118874] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    3.128891] pci 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:00:1d.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[   10.312793] atlantic 0000:06:00.0: enabling device (0000 -> 0002)
[   23.223813] atlantic 0000:06:00.0 eth0: atlantic: link change old 0 new 10000

lsmod && uname -ar ;
  # atlantic              147456  0
  # # // ...
  # Linux version 5.10.138 (vagrant@make-host) (x86_64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r20430-18a2b29aa1) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Aug 29 09:54:00 2022
```

Signed-off-by: Mehdi Ahmadi <aphorise@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
[ fix wrong commit author as requested by author itself ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2022-09-10 15:36:16 +02:00
Daniel Golle 6d1a398c5b kernel: modules: bluetooth: include support for MediaTek USB
Enable MediaTek protocol in btusb module to support e.g. the Bluetooth
part of the MT7921K NGFF/M.2 module.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-09-09 21:08:37 +01:00
Tomasz Maciej Nowak 3b7948474f kernel: load loop driver before creating overlay
Creating overlay will fail if there's no loop device.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2022-09-07 21:21:38 +02:00
Tomasz Maciej Nowak 6c4cd85785 kernel: load FAT filesystem drivers before mount_root
Devices using GPT usually have FAT filesystem on boot partition and
that's where the intermediary backup of system configuration is stored
on sysupgrade. Automatic restoring of OpenWrt configuration after
sysupgrade will be inhibited if the driver is not loaded and file system
type is not specified in mount command.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2022-09-07 21:21:38 +02:00
Josef Schlehofer 3a702f8733 kernel: build crypto md5/sha1/sha256 modules for powerpc
This builds and enables kernel optimized modules for mpc85xx target:
- CONFIG_CRYPTO_MD5_PPC [1]
- CONFIG_CRYPTO_SHA1_PPC_SPE [2]
- CONFIG_CRYPTO_SHA256_PPC_SPE [3]

Where it was possible, then use Signal Processing Engine, because
CONFIG_SPE is already enabled in mpc85xx config.

[1] https://cateee.net/lkddb/web-lkddb/CRYPTO_MD5_PPC.html
[2] https://cateee.net/lkddb/web-lkddb/CRYPTO_SHA1_PPC.html
[3] https://cateee.net/lkddb/web-lkddb/CRYPTO_SHA256_PPC_SPE.html

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-09-02 23:13:53 +02:00
Josef Schlehofer f8f9d6901c kernel: fix typo for tegra crypto-sha1 module
Fixes: e889489bed ("kernel: build
arm/neon-optimized sha1/512 modules")

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2022-08-31 23:25:39 +02:00
Daniel Golle 06c4fc6d5e kernel: enable inside secure driver for MediaTek platforms
Older MT7623 ARMv7 SoC as well as new Filogic platforms come with
inside-secure,safexcel-eip97 units. Enable them in DTS and select the
driver kernel module by default on those platforms.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-28 20:33:15 +01:00
Stijn Tintel 05775e38a5 kernel: extract kmod-sched-act-ipt from kmod-sched
There is only one module in kmod-sched that depends on iptables. Move it
to its own kmod package so we can drop the kmod-ipt-core dependency from
kmod-sched. This makes it possible to disable all kmod-ipt-* packages
without having to disable kmod-sched. Since we now default to firewall4
and nftables, we should avoid iptables dependencies where we can.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2022-08-15 16:51:50 +03:00
Hauke Mehrtens 139a5c2eec kernel: kmod-hwmon-tps23861: Add missing dependency to kmod-regmap-i2c
This fixes the following build error:
Package kmod-hwmon-tps23861 is missing dependencies for the following libraries:
regmap-i2c.ko

Fixes: b664646db7 ("kernel: add kmod-hwmon-tps23861 support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-13 21:45:47 +02:00
Tomas Lara 24307b0351 kernel: remove CONFIG_MMC_BLOCK_BOUNCE
CONFIG_MMC_BLOCK_BOUNCE was removed in kernel v4.13-rc1
 https://github.com/torvalds/linux/commit/c3dccb74be28a345a2ebcc224e41b774529b8b8f

Signed-off-by: Tomas Lara <tl849670@gmail.com>
2022-08-13 21:02:35 +02:00
Alexandru Gagniuc b664646db7 kernel: add kmod-hwmon-tps23861 support
Package the tps23861.ko module, which supports Texas Instruments
TPS23861 PoE+ controller.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2022-08-13 19:59:47 +02:00
Daniel Golle 1291a682f8 kernel: kmod-input-gpio-keys-polled depends on kmod-input-core
While kmod-input-core was previously indirectly selected by
kmod-input-polldev, this is now only the case on Linux 5.10.
Select kmod-input-core as dependency independently of the kernel
version to fix build error:

Package kmod-input-gpio-keys-polled is missing dependencies for the following libraries:
input-core.ko

Fixes: 54878fbbdd ("kernel: kmod-input-polldev: Depend on kernel 5.10")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-08-12 11:05:53 +02:00
Hauke Mehrtens 5b016a88f9 kernel: kmod-phy-smsc: Add new PHY
This adds the SMSC PHY which is needed by the kmod-usb-net-smsc95xx
driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 712ff388bc kernel: kmod-phy-ax88796b: Add new PHY
This adds the AX88796B PHY which is needed by the kmod-usb-net-asix
driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 54878fbbdd kernel: kmod-input-polldev: Depend on kernel 5.10
The input-polldev.ko kernel module was removed from kernel 5.11. The
normal input implementation now supports polling.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens c281edb6ac kernel: kmod-iio-sps30: Add I2C driver
The sps30.ko driver was split into a main sps30.ko driver and a
sps30_i2c.ko driver for the I2C interface with kernel 5.14. Add the
sps30_i2c.ko module to the package too.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens db55dea5fc kernel: kmod-isdn4linux: Remove package
The isdn4linux drivers and subsystem was removed in kernel 5.3, remove
the kernel package also from OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 3986e7c174 kernel: kmod-mdio-gpio: kmod-switch-rtl8366-smi: Add kmod-of-mdio dependency for malta
These two modules also need a depend to kmod-of-mdio on malta.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 5ccf4dcf88 kenrel: kmod-rtc-pt7c4338: Remove package
The rtc-pt7c4338.ko was never upstream under this name, the driver was
removed from OpenWrt some years ago, remove the kmod-rtc-pt7c4338
package too.

Fixes: 74d00a8c38 ("kernel: split patches folder up into backport, pending and hack folders")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 3b5294beb7 kernel: kmod-wwan: Add package
This adds the kmod-wwan package. This provides the generic wwan driver
core which is needed for some existing packages.

Currently the drivers/net/wwan/wwan.ko driver is compiled into the
kernel when one of the wwan module is activated, better build it as a
kernel module.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 2a0284fb03 kernel: kmod-ipt-ulog: Remove package
The ulog iptables target was removed with kernel 3.17, remove the kernel
and also the iptables package in OpenWrt too.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens b75425370d kernel: kmod-nft-nat6: Remove package
The nft NAT packages for IPv4 and IPv6 were merged into the common
packages with kernel 5.1. The kmod-nft-nat6 package was empty in our
build, remove it.

Multiple kernel configuration options were also removed, remove them
from our generic kernel configuration too.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 5808973d14 kernel: kmod-w1-slave-ds2760: Remove package
The w1_ds2760.ko driver was merged into the ds2760_battery.ko driver.
The driver was removed and this package was never build any more.
This happened with kernel 4.19.

Remove this unused package.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 7ebe1dca47 kernel: kmod-net-rtl8192su: Remove package
The R8712U driver depends on cfg80211. cfg80211 is provided by mac80211
backports, we can not build any in kernel drivers which depend on
cfg80211 which is an out of tree module in OpenWrt.

The cfg80211 dependency was added with kernel 5.9.

We could add rtl8192su to backports and build it from there.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 16caa19c8c kernel: kmod-mdio-devres: Add kmod-of-mdio dependency for malta
The malta target does not compile CONFIG_OF_MDIO into the kernel. On
malta the kmod-mdio-devres package depends on kmod-of-mdio.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens 724ef7b484 kernel: kmod-fs-fscache: Add cachefiles.ko
The CONFIG_CACHEFILES configuration option makes the kernel build
cachefiles.ko, also package it. Build CONFIG_CACHEFILES as module and do
not try to build it into the kernel. This did not work because it
depended on CONFIG_FSCACHE which was already build as module.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00
Hauke Mehrtens d29353d30e kernel: kmod-nls-cp932: Add nls_euc-jp.ko too
The CONFIG_NLS_CODEPAGE_932 Config option builds the nls_cp932.ko and
the nls_euc-jp.ko kernel module, package both of them.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-08-10 21:36:17 +02:00