a665659dee50 wifi: mt76: fix beacon monitor for MBSSID nontransmitted BSS
1b26f5f63d42 wifi: mt76: mt7996: Decrement sta counter removing the link in mt7996_mac_reset_sta_iter()
0c1dedac48c3 wifi: mt76: mt7996: Switch deflink to seclink only if link lookup does not fail
7fa21be01b97 wifi: mt76: mt7996: Rely on msta_link link_id in mt7996_vif_link_remove()
492a407111c3 wifi: mt76: mt7996: Account active links in valid_links fields
ade83e44eda0 wifi: mt76: mt7996: Move mlink deallocation in mt7996_vif_link_remove()
efebeea5c058 wifi: mt76: mt7996: Destroy vif active links in mt7996_remove_interface()
a4c790aef40d wifi: mt76: mt7996: Add mcu APIs to enable/disable vif links.
018f60316d4d wifi: mt76: mt7996: Destroy active sta links in mt7996_mac_sta_remove()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Modern gawk rejects C-style /* ... */ comments in AWK code, treating
them as regex patterns where '*' has nothing to quantify. Replace all
such comments with AWK-style '#' comments in lantiq_bdi_conf.awk and
lantiq_ram_init_uart.awk.
Also replace the pattern 'if (x) /* comment */ else action' which used
a C comment as a null statement with the equivalent 'if (!x) action'.
Fixes build error:
awk: error: ? * + or {interval} not preceded by valid subpattern
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22458
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The VF2 boards store their ubootenv on /dev/mtd1 which is a SPI flash
partition. Add support for reading this partition in uboot-envtools,
and add the package into the VF2 image.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
NN6000v1 Specifications:
SoC: Qualcomm IPQ6000 1.2GHz
RAM: K4B4G1646E-BCMA 512MiB x2 = 1 GiB
Flash: FORESEE 256GB eMMC
ETH: QCA8075 (2x LAN, 1x WAN)
WLAN1: QCN5022 2.4GHz AX 2x2
WLAN2: QCN5052 5GHz AX 2x2
Power: DC 12V
Button: Reset, Wps
USB: 1x 3.0
NN6000v2 Specifications:
SoC: Qualcomm IPQ6000 1.2GHz
RAM: MT41K512M16VRN-107 IT:P 1GiB x2 = 2 GiB
Flash: FORESEE 256GB eMMC
ETH: QCA8075 (4x LAN, 1x WAN)
WLAN1: QCN5022 2.4GHz AX 2x2
WLAN2: QCN5052 5GHz AX 2x2
Power: DC 12V
Button: Reset, Wps
USB: 1x 3.0
Install via UART:
1. Download the initramfs image, rename it to
initramfs.itb, host it with the tftp server.
2. Interrupt U-Boot and run these commands:
tftpboot initramfs.itb
bootm
3. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Install via Uboot WebUI:
- Only work when you flash a custom uboot with webui
- Push the reset button for 5 seconds, then use broswer to
access http://192.168.1.1/, then upload factory.bin.
Signed-off-by: Fire Chen <firedevel@icloud.com>
Link: https://github.com/openwrt/openwrt/pull/21787
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
The hostapd configuration for SU-BEAMFORMEE was incorrectly using the
beamformer antenna count instead of the beamformee antenna count for the
[BF-ANTENNA-N] capability string.
Fix this by using config.beamformee_antennas instead.
Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22511
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
"qca,gpio-mask" used to be read between ath9k_hw_init() and
ath9k_init_queues(). After 12913c3c56
it is read in ath9k_of_init(), but it gets overwritten by
ath9k_gpio_cap_init() during the call of ath9k_hw_init(), and causes
https://github.com/openwrt/openwrt/issues/22340
If keeping the most of 12913c3c56,
ath9k_gpio_cap_init() could be patched to keep the existing non-zero
gpio mask (coming from device tree).
Tested on Netgear WNDR4500 v3:
[ 22.558083] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
[ 22.569548] ath: phy1: Use overridden gpio mask 0xf6ff
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/22376
Signed-off-by: Robert Marko <robimarko@gmail.com>
If the user removes all /lib/apk/packages/*.conffiles* files to prevent
sysupgrade from preserving configuration, the glob no longer matches and
sysupgrade ends up calling cat on a non-existent path:
cat: can't open '/lib/apk/packages/*.conffiles_static': No such file or directory
Fix this by using find cmd.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://github.com/openwrt/openwrt/pull/22071
Signed-off-by: Robert Marko <robimarko@gmail.com>
parent_tsf in struct rrm_measurement_beacon_report is le32 (32-bit),
but was being added with blobmsg_add_u16, truncating the value.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The beacon measurement token was not included in the ubus beacon-report
notification, causing consumers that need the token (e.g. for constructing
Beacon Metrics Response TLVs) to receive null.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use blobmsg_add_u32 for non-bool fields in order to avoid wrong
interpretations of the data on JSON/ucode conversion.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Reporting Detail value is a 1-byte field, but was written as le16,
producing a 2-byte write that also contradicts the length field of 1
in the subelement header.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The reporting detail subelement (up to 3 bytes) was not accounted for
in the wpabuf allocation, causing a crash when reporting_detail is set
to a valid value (0, 1, or 2).
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After 02e2065203, it can happen that both,
[VHT160-80PLUS80] and [VHT160] are added to the vht_capab option in
an AP's hostapd.conf, which would cause a failure to start the AP.
Fix the logic in order to prevent such misconfiguration.
Fixes: #22481
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22482
Signed-off-by: Robert Marko <robimarko@gmail.com>
mt76 tracks the PSM state of a sta internally with a wcid flag. TX to
such clients is skipped based on the presence of this flag.
This flag was not added to the PS state notify handler for MT7915 chips.
Without this flag, mt76 queues pending frames to the hardware,
accounting for airtime when a PSM notification is received while in a TX
iteration.
Set the PS flag for the STA WCID to prevent this from happening. TX gets
skipped in presence of this flag.
Link: https://patchwork.kernel.org/project/linux-wireless/patch/20260313112502.2026974-1-mail@david-bauer.net/
Signed-off-by: David Bauer <mail@david-bauer.net>
% git shortlog v1.0.20250521..v1.0.20260223
Doug Freed (1):
wg-quick@.service: add deps on wg-quick.target
Jason A. Donenfeld (8):
wg-quick: linux: use smallest mtu, not largest
syncconf: account for psks removed from config file
wg-quick: linux: deal with resolvconf migration more gracefully
wg-quick: use addconf instead of setconf
wg-quick: linux: do not unnecessarily set sysctl
config: preserve const correctness
syncconf: account for persistent keepalive removed from config file
version: bump
Robyn Kosching (1):
wg-quick: pass on # comments to {Pre,Post}{Up,Down}
Build system: x86/64
Build-tested: x86/64-glibc
Run-tested: x86/64-glibc
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Release Notes:
https://github.com/madler/zlib/blob/v1.3.2/ChangeLog
We also switch package tarball source to GitHub repository releases
to avoid package hash mismatch after the zstd upgrade.
The 005-* patch was suppressed by the upstream commit 15ba5055a935
("CMake: Adapt pkgconfig-file to the GnuInstallDirs layout.")
This patch also adjust the zlib.pc file path as it was changed in
the latest release.
The mipsel_24kc 'zlib' package size will increase by about 1 kB.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21228
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There is no point in printing the missing M3 memory dump adress message
on each boot under the warning level, as not all boards need it at all.
So, degrate it to a debug print with QMI mask.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Originally, the .compatible string for EAP623-Outdoor HD tried to
shorten the "-outdoor" to "od". However, this naming was inconsistent
with the existing "eap610-outdoor". As "od" is not a common shorthand,
spell out the complete word: "eap623-outdoor-hd-v1".
Fixes: 5dbf93c8c5 ("ipq60xx: add support for TP-Link EAP623-Outdoor HD v1")
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18804
Signed-off-by: Robert Marko <robimarko@gmail.com>
* e3f6a41 main: exit 1 when showing the usage
* b17c31f main: exit 1 on getopt() errors
* e086664 lexer: fix a minor memleak in jp_get_token()/match_token()
* e5a07f4 main: defer processing until options are processed
* afe72ad main: usage spell fixes
Signed-off-by: Paul Spooren <mail@aparcar.org>
58eb263 instance: don't print error in case cgroups are disabled
9baf019 instance: use positive error numbers for strerror()
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This adds kernel packages for the Microchip KSZ9477 switch family.
The core package has a target specific dependency as the ksz9477
driver enables DCB which grows the kernel size and can negatively
impact other targets.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/22257
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is nearly identical to what landed in ath-next for v7.1, aside from
resolving a couple conflicts. A separate patch has been added to replace
CONFIG_THERMAL with CPTCFG_ATH12K_THERMAL so the setting may be enabled
via menuconfig (as is done with ath10k and ath11k).
Note that at this stage, throttling has not been implemented upstream,
hence the slight change in wording versus existing options.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Link: https://patch.msgid.link/20260223132622.43464-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/22280
Signed-off-by: Robert Marko <robimarko@gmail.com>
22fb70661799 fix flex array not at end of struct
6a5c4716ca25 convert memcpy + ETH_GSTRING_LEN to ethtool_puts
Signed-off-by: Robert Marko <robimarko@gmail.com>
Zhi-Jun You
Nick Hainke
Felix Fietkau
Hauke Mehrtens
Zoltan HERPAI
Fire Chen
Vladimir Palevich
Andrew Sim
Edward Chow
David Bauer
Rosen Penev
Shine
Christian Marangi
Paweł Owoc
Álvaro Fernández Rojas
Eric Fahlgren
Miika Sundström
Hannu Nyman
Shiji Yang
Yanase Yuki
John Audia
Robert Marko
Til Kaiser
Alexandru Gagniuc
Paul Spooren
Daniel Golle
Tim Harvey
Matt Merhar