% git shortlog v1.0.20250521..v1.0.20260223
Doug Freed (1):
wg-quick@.service: add deps on wg-quick.target
Jason A. Donenfeld (8):
wg-quick: linux: use smallest mtu, not largest
syncconf: account for psks removed from config file
wg-quick: linux: deal with resolvconf migration more gracefully
wg-quick: use addconf instead of setconf
wg-quick: linux: do not unnecessarily set sysctl
config: preserve const correctness
syncconf: account for persistent keepalive removed from config file
version: bump
Robyn Kosching (1):
wg-quick: pass on # comments to {Pre,Post}{Up,Down}
Build system: x86/64
Build-tested: x86/64-glibc
Run-tested: x86/64-glibc
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXqmiX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXmbimX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Due to a missing include, the constant UINT_MAX is undefined. This
fixes issues when building v25.12.0-rc5. Including a newer version of
iproute2 would include the patch, but causes other building issues.
Signed-off-by: Jonas Lochmann <openwrt@jonaslochmann.de>
Link: https://github.com/openwrt/openwrt/pull/22128
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Use substr() instead of array index syntax to access the first
character of the endpoint host string, as ucode does not support
array-style indexing on strings.
Fixes: https://github.com/openwrt/openwrt/issues/22116
Fixes: 8f977b4a40 ("wireguard-tools: fix handling of multi-value config options")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Config options like addresses and ip6prefix can be passed as either a
space-separated string or an array. Add a to_array() helper and use it
consistently for all multi-value options (addresses, ip6prefix,
allowed_ips).
Fixes: https://github.com/openwrt/openwrt/issues/22102
Fixes: 41bc454602 ("wireguard-tools: rewrite proto handler in ucode")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add a patch that avoids including <stddef.h> in BPF headers, fixing
build failures on OpenWrt toolchains where the header is unavailable:
In file included from xdpfilt_dny_udp.c:10:
In file included from ./xdpfilt_prog.h:24:
../lib/../headers/xdp/parsing_helpers.h:18:10: fatal error: 'stddef.h' file not found
18 | #include <stddef.h>
| ^~~~~~~~~~
1 error generated.
make[5]: *** [../lib/common.mk:111: xdpfilt_dny_udp.o] Error 1
make[4]: *** [Makefile:40: xdp-filter] Error 2
Link: https://github.com/openwrt/openwrt/pull/21972
Signed-off-by: Nick Hainke <vincent@systemli.org>
KERNEL_DCB was introduced in 40f1db9cb1, however the dcb utility is not
enabled for iproute2. Although DCB is not generally available among
Ethernet cards, not having the dcb utility renders it completely
unchangeable.
On aarch64, it takes ~85.3KiB.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21606
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Inadvertently defining 'DEFAULT_VARIANT' on both ethool and
ethtool-full variants resulted in
$ make defconfig
tmp/.config-package.in:121615:error: recursive dependency detected!
tmp/.config-package.in:121615: symbol PACKAGE_ethtool-full is selected by PACKAGE_ethtool
tmp/.config-package.in:121605: symbol PACKAGE_ethtool depends on PACKAGE_ethtool-full
Fix this by simply undefining 'DEFAULT_VARIANT' on the ethtool-full
variant, which is ugly, but expedient.
Fixes: https://github.com/openwrt/openwrt/commit/f4fdb996
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21363
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some packages with variants did not specify the default among the
alternatives, so were left without any apk 'provider_priority'
for that package. This caused the apk solver to select the wrong
variant, silently changing the requested package list.
Notable among these were busybox, procd and the hostapd/wpad suite.
This behavior presented in the imagebuilders when creating the
image as follows, silently replacing packages even when explicitly
requested:
$ make image PACKAGES=busybox
...
( 14/148) Installing busybox-selinux (1.37.0-r6)
...
We add 'DEFAULT_VARIANT:=1' to the packages that were missing one,
providing apk with sufficient information to choose the correct
package.
See link below for further examples and discussion.
Link: https://github.com/openwrt/openwrt/pull/21288#issuecomment-3704101422
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21358
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Quectel RG255C modem used in the Teltonika RUT976 does not support
the 'Get Serving System' QMI command, returning "Invalid QMI command".
Without this change, the script would fail even though the connection
could be established successfully.
This patch skips the registration state check if the command is not
supported and relies on subsequent checks instead.
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/20933
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Since now we default to 6.12 and we dropped any support for kernel 6.6,
drop any dependency on it.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Eric Fahlgren
John Audia
Chester A. Unal
Jonas Lochmann
Felix Fietkau
Hauke Mehrtens
Nick Hainke
Rui Salvaterra
Paul Donald
Aleksander Jan Bajkowski
Ivan Pavlov
David Yang
Yanase Yuki
Alexander Patrakov
Til Kaiser
Christian Marangi