The shared reset procedure of MT7610 and MT7612 stop all queues before
starting the reset sequence.
They however never restart these like other supported mt76 chips
do in the reconfig_complete call. This leads to TX not continuing
after the reset.
Restart queues in the reconfig_complete callback to restore
functionality after the reset.
Signed-off-by: David Bauer <mail@david-bauer.net>
Link: https://patchwork.kernel.org/project/linux-wireless/patch/20251129023904.288484-1-mail@david-bauer.net/
Backport upstream commit that fixes handling of multicast packets.
Without this patch, ARP resolution fails, and connectivity from a
station to an AP does not work reliably until traffic is initiated
by the AP.
Signed-off-by: Oliver Sedlbauer <os@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/21088
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Airoha AN7581 SoC supports a Network Processor (NPU) to offload WiFi
traffic. Add the required bits to enable the support of it in the MT76
driver. This will be enabled by default if we are compiling for the
Airoha AN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
[ improve commit title/description ]
Link: https://github.com/openwrt/openwrt/pull/20826
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 79d418eed8)
0aece3089a3a wifi: mt76: mt7996: Remove useless check in mt7996_msdu_page_get_from_cache()
05b3d899ad24 wifi: mt76: Move Q_READ/Q_WRITE definitions in dma.h
85e6517b0ac5 wifi: mt76: Add mt76_dev pointer in mt76_queue struct.
a3b6c67c97d2 wifi: mt76: Add the capability to set TX token start ID
141a81557070 wifi: mt76: Introduce the NPU generic layer
647d11bb17e0 wifi: mt76: mt7996: Add NPU offload support to MT7996 driver
8ff3b2bfc37f wifi: mt76: mt7996: fix typos in comments
0043147439b4 wifi: mt76: mt7925: refactor regulatory domain handling to regd.[ch]
f0e8fe441489 wifi: mt76: mt7925: refactor CLC support check flow
588cc87bf6a2 wifi: mt76: mt7925: refactor regulatory notifier flow
dac1d45fe94b wifi: mt76: mt7925: improve EHT capability control in regulatory flow
c166c4a0e750 wifi: mt76: mt7925: add auto regdomain switch support
d7b059bba166 wifi: mt76: mt7925: disable auto regd changes after user set
84f62a6beb99 wifi: mt76: mmio_*_copy fix byte order and alignment
f5ae5b2e8116 Revert "wifi: mt76: mt792x: improve monitor interface handling"
8ae7e6dc1d3a wifi: mt76: adjust BSS conf pointer handling
1b438ebe0d06 wifi: mt76: mt7925: cqm rssi low/high event notify
7519fa4ce62c wifi: mt76: mt7996: fix max nss value when getting rx chainmask
ea0580ad065f wifi: mt76: mt7996: no need to wait ACK event for SDO command
74112c2956fb wifi: mt76: mt7996: fix implicit beamforming support for mt7992
361d6bdac45d wifi: mt76: mt7996: support fixed rate for link station
d99274cdc30c wifi: mt76: mt7996: fix several fields in mt7996_mcu_bss_basic_tlv()
ad90a85b652b wifi: mt76: mt7996: fix teardown command for an MLD peer
e9fe8bc03e41 wifi: mt76: mt7996: set link_valid field when initializing wcid
050394665502 wifi: mt76: mt7996: use correct link_id when filling TXD and TXP
5d223855552c wifi: mt76: mt7996: fix MLD group index assignment
ab8361dbc421 wifi: mt76: mt7996: fix MLO set key and group key issues
7ce7ab881b3f wifi: mt76: mt7996: fix using wrong phy to start in mt7996_mac_restart()
1e0c23ff754b wifi: mt76: mt7996: fix EMI rings for RRO
eb567bc7f9b6 wifi: mt76: mt7925: ensure the 6GHz A-MPDU density cap from the hardware.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit e1a584b5d2)
Currently, bcm63xx-cfe is being installed into kernel build dir, however
that does not work for Image Builder as only certain artifacts from kernel
build dir are included in Image Builder.
So, simply install bcm63xx-cfe into image staging dir so its artifacts can
be used in Image Builder as well.
Fixes: #18408Fixes: #18409
Link: https://github.com/openwrt/openwrt/pull/18463
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 4a7de50769)
No 'PKG_CPE_ID' is stored for the kernel package Makefile. This commit
adds this.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
(cherry picked from commit 112f594042)
Use the copy_from_user() and copy_to_user() functions for accessing
memory provided by the user in the ptm netdev iotls.
In addition also check for root permission before executing ioctl.
Suggested-by: Stanislav Fort from Aisle Research
Reported-by: Stanislav Fort from Aisle Research
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 2a76abc544)
NULL and fixed addresses are constant, const qualifier are useless.
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:47:1: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
47 | const void (*ifx_bsp_basic_mps_decrypt)(unsigned int addr, int n) = NULL;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:246:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
246 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf0017c4;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:249:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
249 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001ea4;
| ^~~~~
/home/db/owrt/build_dir/target-mips_24kc_musl/linux-lantiq_xrx200/drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c:252:49: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
252 | ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001f38;
| ^~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ac8e876a6e)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
PCI_IRQ_LEGACY was renamed to PCI_IRQ_INTX for kernel 6.10. Fix
compilation error:
/home/db/owrt/build_dir/target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-ipq40xx_generic/vrx518_ep-2.1.0/ep.c:469:69: error: 'PCI_IRQ_LEGACY' undeclared (first use in this function); did you mean 'NR_IRQS_LEGACY'?
469 | err = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_MSI | PCI_IRQ_LEGACY);
| ^~~~~~~~~~~~~~
| NR_IRQS_LEGACY
Signed-off-by: Andre Heider <a.heider@gmail.com>
Co-authored-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18744
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit e80dfdb6c5)
Signed-off-by: Nora Matthias Schiffer <neocturne@universe-factory.net>
Link: https://github.com/openwrt/openwrt/pull/20440
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Building against recent kernel versions (noticed with 6.12) and -Werror
can fail because a macro MAX(a,b) is already defined in minmax.h or
kernel.h before 5.10.
Initially noticed on 6.12, but it now happens after the kernel bump to
6.6.109 as well (upstream commit 6183c65)
In file included from ../mwlwifi-2025.02.06~db97edf2/hif/fwcmd.h:23,
from ../mwlwifi-2025.02.06~db97edf2/core.c:25:
../mwlwifi-2025.02.06~db97edf2/hif/hostcmd.h:1124: error: "MAX" redefined [-Werror]
1124 | #define MAX(a, b) (((a) > (b)) ? (a) : (b))
| ^~~
In file included from usr/include/mac80211-backport/linux/minmax.h:4,
from ./include/linux/kernel.h:27,
from usr/include/mac80211-backport/linux/kernel.h:3,
from ./include/linux/skbuff.h:13,
from usr/include/mac80211-backport/linux/skbuff.h:3,
from ./include/linux/if_ether.h:19,
from usr/include/mac80211-backport/linux/if_ether.h:3,
from ./include/linux/etherdevice.h:20,
from usr/include/mac80211-backport/linux/etherdevice.h:3,
from ../mwlwifi-2025.02.06~db97edf2/core.c:18:
./include/linux/minmax.h:315: note: this is the location of the previous definition
315 | #define MAX(a, b) __cmp(max, a, b)
| ^~~
Add a pending upstream patch which replaces the MAX(a,b) macro to avoid
conflicts and allow compilation with 6.12 backports
(cherry picked from commit 822bceb1d1)
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/20420
Signed-off-by: Robert Marko <robimarko@gmail.com>
This includes the following commits from upstream Linux between 6.12.44
and 6.12.52:
```
$ git log --reverse --oneline v6.12.44...v6.12.52 -- drivers/net/wireless/ net/mac80211/ net/wireless/
5b7ae04969f8 wifi: cfg80211: fix use-after-free in cmp_bss()
3e789f8475f6 wifi: brcmfmac: fix use-after-free when rescheduling brcmf_btcoex_info work
d9f2fb6a2ac8 wifi: mt76: mt7925: fix locking in mt7925_change_vif_links()
1fb26fd3f601 wifi: mt76: prevent non-offchannel mgmt tx during scan/roc
2aef3667e6b0 wifi: mt76: free pending offchannel tx frames on wcid cleanup
e4d5a5fc61fd wifi: mt76: fix linked list corruption
c2e32ac3f107 wifi: iwlwifi: uefi: check DSM item validity
609a8ffff5a0 wifi: ath11k: fix group data packet drops during rekey
cedbbba8a8e8 wifi: cw1200: cap SSID length in cw1200_do_join()
92bedee7168d wifi: libertas: cap SSID len in lbs_associate()
31229145e6ba wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
06616410a3e5 wifi: mwifiex: Initialize the chan_stats array to zero
a001c2f6a40c wifi: mt76: mt7925u: use connac3 tx aggr check in tx complete
eefa2ad9009b wifi: mt76: mt7996: Initialize hdr before passing to skb_put_data()
089fd41902ee wifi: mt76: mt7925: fix the wrong bss cleanup for SAP
26618c039b78 wifi: ath11k: update channel list in reg notifier instead reg worker
fa4abd439f27 wifi: ath11k: update channel list in worker when wait flag is set
2203ef417044 wifi: wilc1000: avoid buffer overflow in WID string configuration
32adb020b0c3 wifi: mac80211: increase scan_ies_len for S1G
8df33f4d4a0b wifi: mac80211: fix incorrect type for ret
79dc6d4932de wifi: virt_wifi: Fix page fault on connect
1f52119809b7 wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()
895cccf639ac wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
914d02595ba6 wifi: rtlwifi: rtl8192cu: Don't claim USB ID 07b8:8188
1713796d6538 wifi: rtl8xxxu: Don't claim USB ID 07b8:8188
```
Removed ath11k/940-ath11k-Revert-clear-the-keys-properly-when-DISABLE_K.patch
This problem is fixed by:
609a8ffff5a0 wifi: ath11k: fix group data packet drops during rekey
Link: https://github.com/openwrt/openwrt/pull/20311
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
David Bauer
Andrew MacIntyre
Tim Harvey
Paweł Owoc
Florian Maurer
Markus Petri
Hauke Mehrtens
Oliver Sedlbauer
Lorenzo Bianconi
Felix Fietkau
Christian Marangi
Pawel Dembicki
Robert Marko
Florian Eckert
Shiji Yang
Andre Heider
Stefan Kalscheuer