Replace the two-step hrtimer initialization pattern with a single
consolidated call to hrtimer_setup().
The legacy approach of calling hrtimer_init() followed by manual
assignment to timer.function is deprecated. The new hrtimer_setup()
helper atomically initializes the timer and assigns the callback
function in one operation, eliminating the race-prone intermediate
state where the timer is initialized but lacks a handler.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reintroduce old-style debugfs file_operations for kernels < 6.14 and
switch the drivers to use debugfs_short_fops + debugfs_create_file_aux
on >= 6.14. This restores compatibility with older kernels while keeping
the new debugfs API working on 6.14+.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch set introduces support for using the in-tree (mainline)
EIP93 crypto driver for kernel 6.18 and later, along with additional
improvements and fixes:
- Conditional Kconfig/Makefile handling for crypto-hw-eip93 to enable use of the mainline driver with kernel 6.18+.
- Patch 926: Use software AES fallback for small requests in the EIP93 driver.
- Patch 927: Add `mediatek,mtk-eip93` compatible string for upstream kernel device trees.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport upstream driver and apply pending downstream patches to
support using the MaxLinear MxL86252 and MxL86282 switches.
The driver supports a native proprietary 8-byte DSA special tag format
(mxl862xx) as well as using an 802.1Q-based DSA tag (mxl862xx-8021q).
All basic bridge, VLAN and LAG operations are supported. A single port
can be used as mirror port. Hardware counters are made available as
ethtool stats or directly serve as interface counters (bytes,
packets).
The switch runs a complex ZephyrOS-based firmware on an integrated
ARC microcontroller, the driver uses the firmware management API over
MDIO to interact with the switch hardware.
Note that the firmware needs to be rather recent (WSP 1.0.78 or later)
to work well with this driver. It can be updated at runtime using devlink.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
Signed-off-by: Robert Marko <robimarko@gmail.com>
a665659dee50 wifi: mt76: fix beacon monitor for MBSSID nontransmitted BSS
1b26f5f63d42 wifi: mt76: mt7996: Decrement sta counter removing the link in mt7996_mac_reset_sta_iter()
0c1dedac48c3 wifi: mt76: mt7996: Switch deflink to seclink only if link lookup does not fail
7fa21be01b97 wifi: mt76: mt7996: Rely on msta_link link_id in mt7996_vif_link_remove()
492a407111c3 wifi: mt76: mt7996: Account active links in valid_links fields
ade83e44eda0 wifi: mt76: mt7996: Move mlink deallocation in mt7996_vif_link_remove()
efebeea5c058 wifi: mt76: mt7996: Destroy vif active links in mt7996_remove_interface()
a4c790aef40d wifi: mt76: mt7996: Add mcu APIs to enable/disable vif links.
018f60316d4d wifi: mt76: mt7996: Destroy active sta links in mt7996_mac_sta_remove()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Modern gawk rejects C-style /* ... */ comments in AWK code, treating
them as regex patterns where '*' has nothing to quantify. Replace all
such comments with AWK-style '#' comments in lantiq_bdi_conf.awk and
lantiq_ram_init_uart.awk.
Also replace the pattern 'if (x) /* comment */ else action' which used
a C comment as a null statement with the equivalent 'if (!x) action'.
Fixes build error:
awk: error: ? * + or {interval} not preceded by valid subpattern
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22458
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The VF2 boards store their ubootenv on /dev/mtd1 which is a SPI flash
partition. Add support for reading this partition in uboot-envtools,
and add the package into the VF2 image.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
NN6000v1 Specifications:
SoC: Qualcomm IPQ6000 1.2GHz
RAM: K4B4G1646E-BCMA 512MiB x2 = 1 GiB
Flash: FORESEE 256GB eMMC
ETH: QCA8075 (2x LAN, 1x WAN)
WLAN1: QCN5022 2.4GHz AX 2x2
WLAN2: QCN5052 5GHz AX 2x2
Power: DC 12V
Button: Reset, Wps
USB: 1x 3.0
NN6000v2 Specifications:
SoC: Qualcomm IPQ6000 1.2GHz
RAM: MT41K512M16VRN-107 IT:P 1GiB x2 = 2 GiB
Flash: FORESEE 256GB eMMC
ETH: QCA8075 (4x LAN, 1x WAN)
WLAN1: QCN5022 2.4GHz AX 2x2
WLAN2: QCN5052 5GHz AX 2x2
Power: DC 12V
Button: Reset, Wps
USB: 1x 3.0
Install via UART:
1. Download the initramfs image, rename it to
initramfs.itb, host it with the tftp server.
2. Interrupt U-Boot and run these commands:
tftpboot initramfs.itb
bootm
3. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Install via Uboot WebUI:
- Only work when you flash a custom uboot with webui
- Push the reset button for 5 seconds, then use broswer to
access http://192.168.1.1/, then upload factory.bin.
Signed-off-by: Fire Chen <firedevel@icloud.com>
Link: https://github.com/openwrt/openwrt/pull/21787
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
The hostapd configuration for SU-BEAMFORMEE was incorrectly using the
beamformer antenna count instead of the beamformee antenna count for the
[BF-ANTENNA-N] capability string.
Fix this by using config.beamformee_antennas instead.
Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22511
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
"qca,gpio-mask" used to be read between ath9k_hw_init() and
ath9k_init_queues(). After 12913c3c56
it is read in ath9k_of_init(), but it gets overwritten by
ath9k_gpio_cap_init() during the call of ath9k_hw_init(), and causes
https://github.com/openwrt/openwrt/issues/22340
If keeping the most of 12913c3c56,
ath9k_gpio_cap_init() could be patched to keep the existing non-zero
gpio mask (coming from device tree).
Tested on Netgear WNDR4500 v3:
[ 22.558083] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
[ 22.569548] ath: phy1: Use overridden gpio mask 0xf6ff
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/22376
Signed-off-by: Robert Marko <robimarko@gmail.com>
If the user removes all /lib/apk/packages/*.conffiles* files to prevent
sysupgrade from preserving configuration, the glob no longer matches and
sysupgrade ends up calling cat on a non-existent path:
cat: can't open '/lib/apk/packages/*.conffiles_static': No such file or directory
Fix this by using find cmd.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://github.com/openwrt/openwrt/pull/22071
Signed-off-by: Robert Marko <robimarko@gmail.com>
parent_tsf in struct rrm_measurement_beacon_report is le32 (32-bit),
but was being added with blobmsg_add_u16, truncating the value.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The beacon measurement token was not included in the ubus beacon-report
notification, causing consumers that need the token (e.g. for constructing
Beacon Metrics Response TLVs) to receive null.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use blobmsg_add_u32 for non-bool fields in order to avoid wrong
interpretations of the data on JSON/ucode conversion.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Reporting Detail value is a 1-byte field, but was written as le16,
producing a 2-byte write that also contradicts the length field of 1
in the subelement header.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The reporting detail subelement (up to 3 bytes) was not accounted for
in the wpabuf allocation, causing a crash when reporting_detail is set
to a valid value (0, 1, or 2).
Signed-off-by: Felix Fietkau <nbd@nbd.name>
After 02e2065203, it can happen that both,
[VHT160-80PLUS80] and [VHT160] are added to the vht_capab option in
an AP's hostapd.conf, which would cause a failure to start the AP.
Fix the logic in order to prevent such misconfiguration.
Fixes: #22481
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22482
Signed-off-by: Robert Marko <robimarko@gmail.com>
Til Kaiser
Mieczyslaw Nalewaj
John Audia
Ignat Loskutov
Felix Fietkau
Daniel Golle
Dmitry Mostovoy
Zhi-Jun You
Nick Hainke
Hauke Mehrtens
Zoltan HERPAI
Fire Chen
Vladimir Palevich
Andrew Sim
Edward Chow
David Bauer
Rosen Penev
Shine
Christian Marangi
Paweł Owoc
Álvaro Fernández Rojas
Eric Fahlgren