Do not pull iptables core for kmod-sched-ctinfo, only nf-conntrack,
reflecting kernel config dependencies.
There is no use of this module in openwrt repos, but it is used by
@hudra0 qosmate
and some less popular qos scripts.
Signed-off-by: Andris PE <neandris@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/24104
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Direct-I2C driver for the HS104 PSE chip (unlike the MCU-fronted
realtek-pse-mcu family). Packaged as kmod-pse-hasivo-hs104.
This driver will be submitted upstream once the pending PSE-core
patches it builds on (above) have landed.
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Link: https://github.com/openwrt/openwrt/pull/22245
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Add kmod packages to support accessing the fTPM (in-firmware TPM) which
can be implemented in the boot firmware of most modern platforms.
- kmod-optee: Open Portable Trusted Execution Environment
- kmod-optee-rng: OP-TEE random number generator client
- kmod-rtc-optee: OP-TEE real-time clock client
- kmod-scmi-transport-optee: SCMI OP-TEE transport
- kmod-tee: Generic Trusted Execution Environment
- kmod-tee-stmm-efi: EFI variable service Trusted Application
- kmod-tpm-ftpm-tee: Microsoft fTPM Trusted Application
Using the TPM 2.0 can be useful for various security applications,
such as encrypting on-disk credentials. OP-TEE itself alone is also
useful as it can provide a PKCS#11 token for authentication (eg. to
connect to a VPN) and significantly lower the risk of leaking secrets
used for authentication. Also, on some platforms RNG and RTC can only be
accessed via OP-TEE, and some ARM SystemReady platforms require EFI
variables to be access via a TA.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add pending patches which add a PSE driver for the PSE setup found on
most of Realtek-based switches. An MCU with a Realtek-defined firmware
and protocol fronts one or more PSE chips (from Realtek or Broadcom) as
a management controller.
The driver provides both I2C/SMBus and UART communication, which varies
among our supported switches. There is no need for complicated userspace
handling anymore, the PSE setup is defined in the device tree and
interfaced in userspace via ethtool, netlink and netifd support.
Those patches have progressed far enough upstream, the bindings are
reviewed. Thus, we can keep this intermediate version downstream to open
it up earlier for usage. Only little changes are expected til the final
version lands.
Link: https://github.com/openwrt/openwrt/pull/23222
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Currently, trying to start a 5GHz radio on 8devices Kiwi will fail as
despite the phy listing the 5GHz channels in iw phy dump, no radio actually
claims the 5GHz range.
This is because driver assumes that if radio supports 6GHz then it cannot
be used for 5Ghz, this is however not correct for wideband radios.
So, similar to the 103-wifi-ath12k-fix-5GHz-operation-on-wideband-QCN.patch
patch ath12k_regd_update() so that 5Ghz range is listed as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://github.com/openwrt/openwrt/pull/24106
Signed-off-by: Robert Marko <robimarko@gmail.com>
The bcm27xx/bcm2708 all-kmods CI build fails when modpost reaches the
DesignWare I2C core module:
ERROR: modpost: "__aeabi_uldivmod"
[drivers/i2c/busses/i2c-designware-core.ko] undefined!
This is triggered by CONFIG_ALL_KMODS=y. The old 32-bit Raspberry Pi
subtargets do not normally select this driver for runtime use, but all-kmods
forces the kmod package to be built anyway. On 32-bit ARM, raw 64-bit
division in a module can cause GCC to emit the ARM EABI helper
__aeabi_uldivmod, which is not available as a kernel module symbol.
The failing reference comes from i2c-designware-master.c, where clock_calc()
uses raw u64 division for SCL timing calculations (introduced with commit
3805d13c3ead21494f7d00aa44f10e3656363d4c in rpi-6.18.y / "i2c: designware:
Support non-standard bus speeds"). That is a kernel-side portability issue,
but these old bcm27xx subtargets do not use DesignWare I2C hardware. They
use the Broadcom I2C controller instead.
The failure is emitted for i2c-designware-core.ko, so guard the hidden core
package itself rather than only guarding the platform or PCI frontend package.
This prevents CONFIG_ALL_KMODS from selecting the failing core module directly
on the affected 32-bit bcm27xx subtargets.
DesignWare I2C is relevant for newer Raspberry Pi 5 / RP1 based systems, so
keep it available for bcm2712.
A similar issue was reported by NixOS for Raspberry Pi ARM builds, where
i2c-designware-core.ko failed with the same unresolved __aeabi_uldivmod symbol.
Their workaround was to disable the DesignWare I2C symbols for older Raspberry
Pi targets that do not need them.
Link: https://github.com/NixOS/nixpkgs/issues/464515
Until the underlying ARM32 kernel-side issue is fixed, avoid building
the DesignWare core package on bcm2708, bcm2709 and bcm2710.
Signed-off-by: Joshua Covington <joshuacov@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23703
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
ath10k and ath11k support reading calibration variants from the device
tree to locate the correct Board Description File (BDF). The ath12k-wsi
binding already describes using qcom,calibration-variant but it is not
implemented in the driver.
Many ath12k designs expose all the radios under a single phy, each of
which typically require a separate BDF. Without this, the radios may not
come up or will not be calibrated correctly.
Fix this by parsing the device tree for the generation-agnostic
qcom,calibration-variant. This allows the driver to properly select,
read and apply the correct BDF.
Additionally, the ath12k-wsi binding documentation describes using the
generation-specific qcom,ath12k-calibration-variant binding as well as
the generation-agnostic qcom,calibration-variant binding to load
board-specific calibration data from the device tree. However, the
driver never implemented either of these.
Given that no devices currently supported use
qcom,ath12k-calibration-variant and the previous patch implements
qcom,calibration-variant, drop the generation-specific version from the
binding to prevent future confusion.
Tested on Askey SBE1V1K.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21767
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
These path names are unlikely to change. There is no need for variables.
Tested on Turris Omnia, but not all of these drivers were tested. Variables
were replaced automatically (search-and-replace in text editor). There
shouldn't be any problems.
Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
Create a package for ov5645 kernel module, required to support camera on
PICO-PI-IMX7D board.
Currently limit the visibility to imx_cortexa7 subtarget, but this can
be enabled on other platforms if needed.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17606
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Add a new sta_set_airtime_weight driver op so drivers can program the
airtime fairness weight into hardware.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
GCC 15 enables -Wheader-guard and the kernel module build treats
warnings as errors, so the mismatched include guards in three driver
headers break the build:
include/rtl8812a_sreset.h:20: error: header guard
'_RTL88812A_SRESET_H_' followed by '#define' of a different macro
[-Werror=header-guard]
Add a patch making each '#ifndef' match its '#define'. rtl8192e_sreset.h
was a copy/paste of the rtl8812a guard, so it gets its own
'_RTL8192E_SRESET_H_' name instead of duplicating '_RTL8812A_SRESET_H_'.
Assisted-by: Claude:claude-opus-4-8
Link: https://github.com/openwrt/openwrt/pull/23957
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Split kmod-nf-nathelper-extra into separate helper packages
and keep the original package as a compatibility meta-package.
This allows selecting only the required protocol helpers
instead of installing all helper modules and dependencies.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/23690
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit fixes "286f377389a button-hotplug: add KEY_SETUP and KEY_VENDOR
handling" which changed the code without bumping the PKG_RELEASE, resulting in
different binaries under the same version.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Link: https://github.com/openwrt/openwrt/pull/23826
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport two upstream commits that replace memset() on coherent DMA
descriptor rings with explicit WRITE_ONCE() status word stores.
On 32-bit PowerPC platforms like apm821xx, coherent DMA memory may be
mapped uncached. The optimized memset() path can use dcbz there, which
triggers alignment warnings and spams the kernel log.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23776
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
LED trigger for network interfaces.
- Aggregated per-family (lan/wan/wlan).
- Family and flags are taken from device tree properties:
- "family" : simple family string "lan" | "wan" | "wlan"
- "mode" : any combination of "link", "tx", "rx" flags
Priority/combination:
* If "mode" present: flags come from "mode" and take precedence.
Family is taken from "family" if present, otherwise from the LED name.
* If only "family" present: use its family and default flags = link+tx+rx.
* If neither present: fall back to LED device name parsing.
- Suffix "-online" is valid ONLY in the LED name (label),
e.g. "green:wlan-online". It indicates the online variant but is applied
only when DT "mode" is absent.
Behaviour:
- wlan (normal): blink/solid driven by throughput table
- lan/wan (normal): one-shot blink on TX/RX packet change
- *-online variants: steady ON while any interface of the family has carrier
Interfaces are auto-tracked by name match (lan0, wan1, wlan2, phy0, wl1,
ath0, ra0...). Up to MAX_IFACES (16) interfaces per family
This trigger is intended for board/device authors and drivers to provide simple
network-activity LED behaviour without per-interface wiring in userspace.
Refresh bcm27xx patches in the same commit to account for line shifts in
drivers/leds/trigger/Kconfig and Makefile, ensuring clean applies for
bisectability.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/19903
Signed-off-by: Robert Marko <robimarko@gmail.com>
c3bf07a66f7e make: honor SOURCE_DATE_EPOCH in BUILD_DATE
bb4f3f0b947e Revert "MP: fix uniphy reset in phy to phy link scenario"
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for the Micro Crystal RV3028 I2C real-time clock chip.
Tested on a Kontron OSM-S/BL i.MX8MP eval board.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Since upstream commit 60e3f1e9b7a5 ("lib/crypto: arm64/sha512:
Migrate optimized SHA-512 code to library"), the kernel module is no
longer available, and its fucntionality os provided by the kernel
core. Thus do not try to package this for linux 6.18 and later.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21506
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a function to allow drivers to query the pending AQL airtime
for a given txq, for both unicast and broadcast.
This will be used for mt76 to limit buffering in AP mode for power-save
stations.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
gpio-button-hotplug skips buttons with button->irq set because it cannot
handle true interrupt-only gpio-keys descriptions. That check also skips
valid GPIO-backed buttons that provide a separate interrupt specifier, such
as the Meraki MX60 reset button.
Try to acquire the GPIO descriptor before deciding that an explicit-IRQ
button is unsupported. Continue to skip true interrupt-only buttons, and
make the IRQ setup and teardown paths ignore skipped entries.
Tested on: Cisco Meraki MX60. Reset button now works.
Fixes: 23845fa10b ("gpio-button-hotplug: do not error on interrupt attached keys")
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23382
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Rosen Penev
Hauke Mehrtens
Andris PE
Carlo Szelinsky
Daniel Golle
Jonas Jelonek
Robert Marko
Marius Dinu
Robert Marko
Joshua Covington
Andrew LaMarche
Lech Perczak
Felix Fietkau
Mieczyslaw Nalewaj
Paul Spooren
Qingfang Deng
Thomas Richard
Martin Schiller
Alexandru Gagniuc