mirror of
https://github.com/openwrt/openwrt.git
synced 2026-06-17 14:50:15 +04:00
Taiga Ogawa
024abbcc92
Buffalo WSR-2533DHP3 is a 2.4/5 GHz band 11ac router, based on MT7622B. Specification: - SoC : MediaTek MT7622B - RAM : DDR3 256 MiB - Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG) - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7622B (SoC) - 5 GHz : MediaTek MT7615 - Ethernet : 5x 10/100/1000 Mbps - Switch : MediaTek MT7531 - LEDs/Keys : 6x/5x (2x: buttons, 3x: slide-switches) - UART : through-hole on PCB (J4) - assignment: 3.3V, GND, TX, RX from tri-angle marking - settings : 115200n8 - Power : 12 VDC, 1.5 A Flash instruction using factory.bin image: 1. Boot WSR-2533DHP3 with "Router" mode 2. Access to "http://192.168.11.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory.bin image and click update ("更新実行") button 4. Wait ~120 seconds to complete flashing Note: - This device has 2x OS images on flash. The first one will always be used for booting and the secondary is for backup. Tested: - initramfs boot - factory.bin installation from OEM WebUI - LAN port assignment - WAN DHCP - NAT routing - 2.4 GHz Wi-Fi - 5 GHz Wi-Fi - LEDs - Buttons MAC Addresses: LAN : 58:27:8C:xx:xx:90 (board_data, mac (text)) WAN : 58:27:8C:xx:xx:90 (board_data, mac (text)) 2.4 GHz: 58:27:8C:xx:xx:91 5 GHz : 58:27:8C:xx:xx:94 Signed-off-by: Taiga Ogawa <zectaiga@gmail.com> Link: https://github.com/openwrt/openwrt/pull/23497 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>