mirror of
https://github.com/openwrt/openwrt.git
synced 2026-06-17 14:50:15 +04:00
Christian Marangi
a66e30631c
Align the qualcommax target to the pattern already used on other devices where the device DTS are placed in a dedicated directory separate from the files directory. This, while trying to enforce a common pattern for every target, also permits to do modification to device DTS without having to trigger a recompilation of the entire kernel (as the files directory is not touched) Link: https://github.com/openwrt/openwrt/pull/22037 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
420 lines
7.1 KiB
Devicetree
420 lines
7.1 KiB
Devicetree
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
|
|
#include "ipq5018.dtsi"
|
|
#include "ipq5018-ess.dtsi"
|
|
#include "ipq5018-qcn6122.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "ELECOM WRC-X3000GS2";
|
|
compatible = "elecom,wrc-x3000gs2", "qcom,ipq5018";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart1;
|
|
led-boot = &led_power_green;
|
|
led-failsafe = &led_power_red;
|
|
led-running = &led_power_green;
|
|
led-upgrade = &led_power_green;
|
|
label-mac-device = <&dp1>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs-append = " root=/dev/ubiblock0_1 coherent_pool=2M";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&button_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
switch-router {
|
|
label = "router";
|
|
gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <BTN_0>;
|
|
linux,input-type = <EV_SW>;
|
|
};
|
|
|
|
reset-button {
|
|
label = "reset";
|
|
gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
wps-button {
|
|
label = "wps";
|
|
gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&led_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
led-0 {
|
|
gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_WPS;
|
|
};
|
|
|
|
led_power_green: led-1 {
|
|
gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_POWER;
|
|
};
|
|
|
|
led_power_red: led-2 {
|
|
gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_POWER;
|
|
};
|
|
|
|
led-3 {
|
|
gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WLAN_5GHZ;
|
|
linux,default-trigger = "phy1radio";
|
|
};
|
|
|
|
led-4 {
|
|
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_WLAN_5GHZ;
|
|
};
|
|
|
|
led-5 {
|
|
gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WLAN_2GHZ;
|
|
linux,default-trigger = "phy0radio";
|
|
};
|
|
|
|
led-6 {
|
|
gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_WLAN_2GHZ;
|
|
};
|
|
|
|
led-7 {
|
|
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WAN;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sleep_clk {
|
|
clock-frequency = <32000>;
|
|
};
|
|
|
|
&xo_board_clk {
|
|
clock-div = <4>;
|
|
clock-mult = <1>;
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&serial_0_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&prng {
|
|
status = "okay";
|
|
};
|
|
|
|
&qfprom {
|
|
status = "okay";
|
|
};
|
|
|
|
&qpic_bam {
|
|
status = "okay";
|
|
};
|
|
|
|
&qpic_nand {
|
|
pinctrl-0 = <&qpic_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "spi-nand";
|
|
reg = <0>;
|
|
nand-ecc-engine = <&qpic_nand>;
|
|
|
|
/* strength=8 breaks NAND I/O, use 4 instead */
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
nand-bus-width = <8>;
|
|
|
|
partitions {
|
|
compatible = "qcom,smem-part";
|
|
|
|
partition-0-appsblenv {
|
|
compatible = "fixed-partitions";
|
|
label = "0:appsblenv";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "env-data";
|
|
reg = <0x0 0x40000>;
|
|
|
|
nvmem-layout {
|
|
compatible = "u-boot,env";
|
|
|
|
macaddr_appsblenv_ethaddr: ethaddr {
|
|
compatible = "mac-base";
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&switch {
|
|
status = "okay";
|
|
|
|
switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
|
|
|
|
qcom,port_phyinfo {
|
|
port@1 {
|
|
port_id = <1>;
|
|
mdiobus = <&mdio0>;
|
|
phy_address = <7>;
|
|
};
|
|
|
|
port@2 {
|
|
port_id = <2>;
|
|
forced-speed = <1000>;
|
|
forced-duplex = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&dp1 {
|
|
status = "okay";
|
|
|
|
label = "wan";
|
|
nvmem-cells = <&macaddr_appsblenv_ethaddr 3>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&dp2 {
|
|
status = "okay";
|
|
|
|
nvmem-cells = <&macaddr_appsblenv_ethaddr 0>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio1 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&mdio1_pins>, <&switch_reset_pins>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
|
|
|
|
qca8337_0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
qca8337_1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
qca8337_2: ethernet-phy@2 {
|
|
reg = <2>;
|
|
};
|
|
|
|
qca8337_3: ethernet-phy@3 {
|
|
reg = <3>;
|
|
};
|
|
|
|
ethernet-switch@18 {
|
|
compatible = "qca,qca8337";
|
|
reg = <0x18>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan1";
|
|
phy-handle = <&qca8337_0>;
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan2";
|
|
phy-handle = <&qca8337_1>;
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan3";
|
|
phy-handle = <&qca8337_2>;
|
|
};
|
|
|
|
port@4 {
|
|
reg = <4>;
|
|
label = "lan4";
|
|
phy-handle = <&qca8337_3>;
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
phy-mode = "sgmii";
|
|
ethernet = <&dp2>;
|
|
qca,sgmii-enable-pll;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
button_pins: button-state {
|
|
button-pins {
|
|
pins = "gpio22", "gpio38";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
switch-pins {
|
|
pins = "gpio14";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
led_pins: led-state {
|
|
pins = "gpio12", "gpio13", "gpio16", "gpio24",
|
|
"gpio25", "gpio26", "gpio28", "gpio46";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
mdio1_pins: mdio-state {
|
|
mdc-pins {
|
|
pins = "gpio36";
|
|
function = "mdc";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
mdio-pins {
|
|
pins = "gpio37";
|
|
function = "mdio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
qpic_pins: qpic-state {
|
|
clock-pins {
|
|
pins = "gpio9";
|
|
function = "qspi_clk";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
cs-pins {
|
|
pins = "gpio8";
|
|
function = "qspi_cs";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
|
|
data-pins {
|
|
pins = "gpio4", "gpio5", "gpio6", "gpio7";
|
|
function = "qspi_data";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
serial_0_pins: uart0-state {
|
|
pins = "gpio20", "gpio21";
|
|
function = "blsp0_uart0";
|
|
bias-disable;
|
|
};
|
|
|
|
switch_reset_pins: switch-reset-state {
|
|
pins = "gpio39";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* ath11k Wi-Fi consumes too large memory spaces and too few spaces are
|
|
* available for users. To prevent OOM when using LuCI or other softwares,
|
|
* disable Wi-Fi related peripherals at the moment.
|
|
*/
|
|
&q6v5_wcss {
|
|
status = "disabled";
|
|
|
|
boot-args = <0x2 4 2 18 0 0>; /* pcie:1, len:4, updid:2, reset:gpio18 */
|
|
};
|
|
|
|
&wifi {
|
|
status = "disabled";
|
|
|
|
qcom,rproc = <&q6_wcss_pd1>;
|
|
qcom,userpd-subsys-name = "q6v5_wcss_userpd1";
|
|
qcom,ath11k-calibration-variant = "ELECOM-WRC-X3000GS2";
|
|
qcom,ath11k-fw-memory-mode = <2>;
|
|
qcom,bdf-addr = <0x4c400000>;
|
|
|
|
ieee80211-freq-limit = <2400000 2483000>;
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "disabled";
|
|
|
|
qcom,rproc = <&q6_wcss_pd2>;
|
|
qcom,userpd-subsys-name = "q6v5_wcss_userpd2";
|
|
qcom,ath11k-calibration-variant = "ELECOM-WRC-X3000GS2";
|
|
qcom,ath11k-fw-memory-mode = <2>;
|
|
qcom,bdf-addr = <0x4d100000>;
|
|
qcom,m3-dump-addr = <0x4df00000>;
|
|
|
|
ieee80211-freq-limit = <5150000 5730000>;
|
|
};
|