mirror of
https://github.com/openwrt/openwrt.git
synced 2026-07-17 16:41:56 +04:00
Robert Senderek
1c8c05ca98
----- Hardware: CPU: ARMADA 380 1x1332Mhz RAM: 512MB DDR3 FLASH: 256MB MX30LF2G18AC 2x SATA III 2x USB3.0 1x USB2.0 i2c to control various states. RTC with battery 1Gbit LAN (WoL capable) 9x LED RESET button at back Power button at front (gpio-poweroff) Copy button at front ----- Doesn't work FAN control buzzer ----- UART connections Connect UART to port J3 115200 +----+----+----+----+----+ |3.3V| TX | RX | | GND| +----+----+----+ +----+ Depend of UART adapter board can fail to boot when adapter is attached. (all leds are dimmed) . In that case disconnect UART for an < second and after that all leds should be white. Stop u-boot by ctrl-c within 3s window. (bootdelay 7s or more helps) setenv bootdelay 7 saveenv ----- Instalation via UART Boot initramfs-kernel.bin setenv ethact egiga0 setenv serverip 192.168.1.11 setenv ipaddr 192.168.1.12 tftpboot 0x02000000 *initramfs-kernel.bin bootm 0x02000000 - Device is DHCP client by default ( as the other supported NAS) do backup into safe space /dev/mtd3 Kernel-1 /dev/mtd4 RootFS-1 use sysupgrade in console or via luci ----- MAC addresses mac stored in u-boot-env ethaddr label mac = eth0 mac = 5c:6a:80:xx:xx:xx ----- Setting up u-boot dual boot u-boot contain two banks contain two OEM copies To boot OpenWrt from bank1 setenv next_bootfrom 1 saveenv To boot OEM from bank2 setenv next_bootfrom 2 saveenv ----- Configuration via i2c install i2c-tools Enable WoL i2cset -y 0x0 0xa 0xa 0x0006 w Disable WoL i2cset -y 0x0 0xa 0xa 0x0306 w Enable auto power on i2cset -y 0x0 0x0a 0x0a 0x0107 w Disable auto power on i2cset -y 0x0 0x0a 0x0a 0x0007 w Signed-off-by: Robert Senderek <robert.senderek@10g.pl> Link: https://github.com/openwrt/openwrt/pull/23228 Signed-off-by: Robert Marko <robimarko@gmail.com>