mirror of
https://github.com/openwrt/openwrt.git
synced 2026-10-26 01:29:33 +04:00
GLiNet Tech
00f7f33d2f
This patch adds support for GL.iNet BE10000(Slate 7 Pro)
The GL.iNet BE10000 is a portable device with Wi-Fi 7, featuring two
2.5G Ethernet ports, one of which is a LAN port
and the other a WAN port.
Hardware Specification:
- SoC: MediaTek MT7987A (Quad-core ARM Cortex-A53 2.0 GHz)
- RAM: 1024 MiB DDR4
- Flash: 512 MiB SPI-NAND
- WiFi: MediaTek MT7995AV (WiFi 7)
- 2.4GHz: b/g/n/ax/be (2x2 MIMO)
- 5GHz: a/n/ac/ax/be (3x3 MIMO)
- 6GHz: ax/be (3x3 MIMO)
- Ethernet:
- 1x 10/100/1000/2500 Mbps WAN (Realtek RTL8221 PHY)
- 1x 10/100/1000/2500 Mbps LAN (SoC internal PHY)
- Buttons: Reset,Switch
- UART: 115200 8n1 (VCC, RX, TX, GND)
Flash Layout:
- 0x0~0x100000 : bl2
- 0x100000~0x180000 : u-boot-env
- 0x180000~0x580000 : Factory
- 0x580000~0x880000 : fip
- 0x880000~0x8c0000 : log
- 0x8c0000~0x900000 : CFG
- 0x900000~0x1e000000 : ubi
MAC Addresses:
- Base MAC located at Factory partition offset 0x4000
- gmac0 (WAN) : Base - 0 (Label MAC)
- gmac1 (LAN) : Base - 1
Installation:
1. You can directly upgrade using the
openwrt-mediatek-filogic-glinet_gl-be10000-squashfs-sysupgrade.bin
image on the official GL firmware upgrade page.
2. Access the device and use the sysupgrade command to upgrade.
Note: When upgrading from official firmware, use the -n parameter
to preserve no configuration.
Signed-off-by: GLiNet Tech <glrouter@gl-inet.com>
Link: https://github.com/openwrt/openwrt/pull/22485
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>