mirror of
https://github.com/openwrt/openwrt.git
synced 2026-06-17 17:01:44 +04:00
Tuan Phan
2808857215
Specifications:
SoC: MediaTek MT7988A (4 cores)
RAM: 1024MiB
Flash: Winbond SPI-NAND 128 MiB
Network: 1 WAN (2.5G), 3 LAN (1G), 1 SFP+ (10G)
2 SIM slots
Buttons: Reset, WPS
Power: DC 12V 3A (Recommend 19V to avoid voltage drop)
WiFi: MT7996 2.4Ghz, 5.8Ghz and 6Ghz (BE19000)
- 2.4Ghz and 5.8Ghz share same dual band antenna (4)
- 6Ghz uses dedicated 6G antenna (4)
Misc: 1 USB2.0 port, UART header
Installation:
A. Through U-Boot menu:
- Prepare your connecting computer to use a static IP in
network 192.168.1.0/24
- Power down the router and hold in the Reset button.
- While holding in the button power up the router again.
- Hold the button in for 10 seconds and then release.
- Use your browser to go to 192.168.1.1
- If you see a GUI allowing for flashing firmware then
you got the right model.
- Upload the sysupgrade file.
Note 1: Recovery GUI can be used to recover from an incorrect
firmware flash.
Note 2: There is a GPIO watchdog that expires after 2 minutes
so flashing sysupgrade via U-boot needs to be done
quickly within that timer.
B. Through OpenWrt Dashboard:
If your router comes with OpenWrt preinstalled
(modified by the seller), you can easily upgrade
by going to the dashboard (192.168.1.1) and then
navigate to System -> Backup/Flash firmware,
then flash the firmware
MAC Addresses:
LAN(printed MAC) : F8:5E:3C:xx:xx:xx (Factory, 0xffff4)
WAN : F8:5E:3C:xx:xx:xx (Factory, 0xffffa)
SFP+ : F8:5E:3C:xx:xx:xx (Factory, 0xfffee)
2.4GHz : F8:5E:3C:xx:xx:xx (Factory, 0x4)
5GHz : F8:5E:3C:xx:xx:xx (Factory, 0x4) + 0x10
6Ghz : F8:5E:3C:xx:xx:xx (Factory, 0x4) + 0x20
Signed-off-by: Tuan Phan <pttuan@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23053
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>