mirror of
https://github.com/openwrt/openwrt.git
synced 2026-10-14 15:17:37 +04:00
Ryan S
2b4579c1ac
TP-Link EAP620HD V2 is a 802.11ax AP claiming AX1800 support. Specifications: CPU: Qualcomm IPQ6018 Quad core Cortex-A53 RAM: 1 GB Storage: ESMT PSR1GA30DT 128MB NAND Ethernet: Gigabit RJ45 port with PoE input WLAN: 2.4GHz/5GHz LEDs: Single-color LED (Blue) Buttons: 1x Reset UART: 4-pin unpopulated header 1.8 V level, Pinout 1 - TX, 2 - RX, 3 - GND, 4 - 1.8V Installation: Web UI method Set up the device using the vendor's web UI. After that go to Management->SSH and enable the "SSH Login" checkbox. Select "Save". The connect to the machine via SSH: ssh -o hostkeyalgorithms=ssh-rsa <ip_of_device> Disable signature verification: cliclientd stopcs Rename the "-web-ui-factory" image to something less than 63 characters, maintaining the ".bin" suffix. Go to System -> Firmware Update. Under "New Firmware File", click "Browse" and select the image Select "Update" and confirm by clicking "OK". If the update fails, the web UI should show an error message. Otherwise, the device should reboot into OpenWRT. TFTP method To flash via tftp, first place the initramfs image on the TFTP server. setenv serverip <ip of tftp server> setenv ipaddr <ip in same subnet as tftp server> tftpboot tplink_eap620-hd-v2-initramfs-uImage.itb bootm This should boot OpenWRT. Once booted, flash the sysupgrade.bin image using either luci or the commandline. Big thanks to @mrnuke for the groundwork and support. Signed-off-by: Ryan S <rspierz@gmail.com> Link: https://github.com/openwrt/openwrt/pull/18227 Signed-off-by: Robert Marko <robimarko@gmail.com>