Files
openwrt/target/linux/airoha/patches-6.12/920-08-net-airoha-Introduce-WAN-device-flag.patch
T
Lorenzo Bianconi d22ceb8d24 airoha: Improve LRO performances
Add hardware TCP Large Receive Offload (LRO) support to the airoha_eth
driver, leveraging the EN7581/AN7583 SoC's 8 dedicated LRO hardware queues
mapped to RX queues 24–31. LRO hw offloading does not support
Scatter-Gather (SG) so it is required to increase the page_pool allocation
order to 2 for RX queues 24–31 (LRO queues).

Performance comparison between GRO and hw LRO has been carried out using
a 10Gbps NIC:

GRO: ~2.7 Gbps
LRO: ~8.1 Gbps

Tested-by: Madhur Agrawal <madhur.agrawal@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://github.com/openwrt/openwrt/pull/23530
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2026-05-27 09:17:12 +02:00

175 lines
5.2 KiB
Diff

From c4f3077948eda05a6b9d1a11304d82c3e0300151 Mon Sep 17 00:00:00 2001
Message-ID: <c4f3077948eda05a6b9d1a11304d82c3e0300151.1779348625.git.lorenzo@kernel.org>
In-Reply-To: <e15783f7c987e199ecf80b3d858ed5a86d33c508.1779348625.git.lorenzo@kernel.org>
References: <e15783f7c987e199ecf80b3d858ed5a86d33c508.1779348625.git.lorenzo@kernel.org>
From: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Fri, 3 Apr 2026 12:07:27 +0200
Subject: [PATCH 08/13] net: airoha: Introduce WAN device flag
Introduce WAN flag to specify if a given device is used to transmit/receive
WAN or LAN traffic. Current codebase supports specifying LAN/WAN device
configuration in ndo_init() callback during device bootstrap.
In order to consider setups where LAN configuration is used even for
GDM3/GDM4 devices, check airoha_is_lan_gdm_dev() to select pse_port in
airoha_ppe_foe_entry_prepare().
Please note after this patch, it will be possible to specify multiple LAN
devices but just a single WAN one. Please note this change is not visible
to the user since airoha_eth driver currently supports just the internal
phy available via the MT7530 DSA switch and there are no WAN interfaces
officially supported since PCS/external phy is not merged mainline yet
(it will be posted with following patches).
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/net/ethernet/airoha/airoha_eth.c | 72 +++++++++++++++++++-----
drivers/net/ethernet/airoha/airoha_eth.h | 13 ++---
drivers/net/ethernet/airoha/airoha_ppe.c | 2 +-
3 files changed, 65 insertions(+), 22 deletions(-)
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -2058,36 +2058,80 @@ static int airoha_set_gdm2_loopback(stru
return 0;
}
-static int airoha_dev_init(struct net_device *netdev)
+static struct airoha_gdm_dev *
+airoha_get_wan_gdm_dev(struct airoha_eth *eth)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(eth->ports); i++) {
+ struct airoha_gdm_port *port = eth->ports[i];
+ int j;
+
+ if (!port)
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(port->devs); j++) {
+ struct airoha_gdm_dev *dev = port->devs[j];
+
+ if (dev && !airoha_is_lan_gdm_dev(dev))
+ return dev;
+ }
+ }
+
+ return NULL;
+}
+
+static void airoha_dev_set_qdma(struct airoha_gdm_dev *dev)
{
- struct airoha_gdm_dev *dev = netdev_priv(netdev);
- struct airoha_gdm_port *port = dev->port;
struct airoha_eth *eth = dev->eth;
int ppe_id;
/* QDMA0 is used for lan ports while QDMA1 is used for WAN ports */
dev->qdma = &eth->qdma[!airoha_is_lan_gdm_dev(dev)];
dev->dev->irq = dev->qdma->irq_banks[0].irq;
- airoha_set_macaddr(dev, netdev->dev_addr);
+
+ ppe_id = !airoha_is_lan_gdm_dev(dev) && airoha_ppe_is_enabled(eth, 1);
+ airoha_ppe_set_cpu_port(dev, ppe_id, airoha_get_fe_port(dev));
+}
+
+static int airoha_dev_init(struct net_device *netdev)
+{
+ struct airoha_gdm_dev *dev = netdev_priv(netdev);
+ struct airoha_gdm_port *port = dev->port;
switch (port->id) {
case AIROHA_GDM3_IDX:
- case AIROHA_GDM4_IDX:
- /* If GDM2 is active we can't enable loopback */
- if (!eth->ports[1]) {
- int err;
-
- err = airoha_set_gdm2_loopback(dev);
- if (err)
- return err;
- }
+ case AIROHA_GDM4_IDX: {
+ struct airoha_eth *eth = dev->eth;
+
+ /* GDM2 supports a single net_device */
+ if (eth->ports[1] && eth->ports[1]->devs[0])
+ break;
+
+ if (airoha_get_wan_gdm_dev(eth))
+ break;
+
+ fallthrough;
+ }
+ case AIROHA_GDM2_IDX:
+ /* GDM2 is always used as wan */
+ dev->flags |= AIROHA_PRIV_F_WAN;
break;
default:
break;
}
- ppe_id = !airoha_is_lan_gdm_dev(dev) && airoha_ppe_is_enabled(eth, 1);
- airoha_ppe_set_cpu_port(dev, ppe_id, airoha_get_fe_port(dev));
+ airoha_dev_set_qdma(dev);
+ airoha_set_macaddr(dev, netdev->dev_addr);
+
+ if (!airoha_is_lan_gdm_dev(dev) &&
+ (port->id == AIROHA_GDM3_IDX || port->id == AIROHA_GDM4_IDX)) {
+ int err;
+
+ err = airoha_set_gdm2_loopback(dev);
+ if (err)
+ return err;
+ }
return 0;
}
--- a/drivers/net/ethernet/airoha/airoha_eth.h
+++ b/drivers/net/ethernet/airoha/airoha_eth.h
@@ -550,6 +550,10 @@ struct airoha_qdma {
DECLARE_BITMAP(qos_channel_map, AIROHA_NUM_QOS_CHANNELS);
};
+enum airoha_priv_flags {
+ AIROHA_PRIV_F_WAN = BIT(0),
+};
+
struct airoha_gdm_dev {
struct airoha_gdm_port *port;
struct airoha_qdma *qdma;
@@ -566,6 +570,7 @@ struct airoha_gdm_dev {
u64 cpu_tx_packets;
u64 fwd_tx_packets;
+ u32 flags;
int nbq;
};
@@ -672,13 +677,7 @@ static inline u16 airoha_qdma_get_txq(st
static inline bool airoha_is_lan_gdm_dev(struct airoha_gdm_dev *dev)
{
- struct airoha_gdm_port *port = dev->port;
-
- /* GDM1 port on EN7581 SoC is connected to the lan dsa switch.
- * GDM{2,3,4} can be used as wan port connected to an external
- * phy module.
- */
- return port->id == 1;
+ return !(dev->flags & AIROHA_PRIV_F_WAN);
}
static inline bool airoha_is_7581(struct airoha_eth *eth)
--- a/drivers/net/ethernet/airoha/airoha_ppe.c
+++ b/drivers/net/ethernet/airoha/airoha_ppe.c
@@ -351,7 +351,7 @@ static int airoha_ppe_foe_entry_prepare(
return -EINVAL;
port = dev->port;
- if (dsa_port >= 0 || eth->ports[1])
+ if (dsa_port >= 0 || airoha_is_lan_gdm_dev(dev))
pse_port = port->id == 4 ? FE_PSE_PORT_GDM4
: port->id;
else