mirror of
https://github.com/openwrt/openwrt.git
synced 2026-10-19 18:04:45 +04:00
Ivan RainboltandClaude Opus 5
bafaf2665a
The WR3000S has a GPIO LED behind its front-panel "Internet" lamp
(white:wan-online, &pio 11), but no board.d entry, so no trigger is ever
set and the lamp stays dark. Give it the same netdev trigger the WR3000H
and WR3000P already use for their white:wan-online LED: follow the link
state of the wan port. As on those boards, "link" means the wan port has
carrier, not that connectivity works.
The panel's WAN and LAN1-4 lamps are not GPIO LEDs and are not registered
as Linux LEDs at all; they light on link in hardware, so board.d cannot
address them and they are untouched here. The -ubootmod variant includes
the same mt7981b-cudy-wr3000s-v1.dtsi, and so the identical LED, and is
listed alongside.
Tested on a WR3000S v1 (OEM layout), on an image built from main at
6727587d24 plus this commit: after a config-wipe sysupgrade the board.d
entry is applied automatically (board.json -> system.led_internet), the
lamp lights while the WAN port has link, and it goes dark when it loses
link. Only the OEM-layout variant was flashed.
Signed-off-by: Ivan Rainbolt <ivan@github.ivanthegeek.com>
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/25335
Signed-off-by: Robert Marko <robimarko@gmail.com>