Maintainer: @mkrkn @neheb
Compile tested: armv7, cortexA15, OpenWRT 23.05
Run tested: Linksys EA8500
Compile tested: armv8, cortexA53, OpenWRT main
Run tested: Dynalink DL-WRX36
Description:
Script-security is always 2 and cannot be changed from the openvpn config file due to a missing rule in openvpn.init.
This is discussed in issue #23014
This patch adds the missing rule in openvpn.init to parse script-security from the openvpn config file.
Signed-off-by: Erik Conijn <egc112@msn.com>
Upstream bump
,,_ -*> Snort++ <*-
o" )~ Version 3.1.78.0
'''' By Martin Roesch & The Snort Team
http://snort.org/contact#team
Copyright (C) 2014-2024 Cisco and/or its affiliates. All rights reserved.
Copyright (C) 1998-2013 Sourcefire, Inc., et al.
Using DAQ version 3.0.14
Using LuaJIT version 2.1.0-beta3
Using OpenSSL 3.0.12 24 Oct 2023
Using libpcap version 1.10.4 (with TPACKET_V3)
Using PCRE version 8.45 2021-06-15
Using ZLIB version 1.3
Using Hyperscan version 5.4.2 2024-01-15
Using LZMA version 5.4.4
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
The log is filled with 'debug' messages. This is not necessary and is
only normaly needed during development. To suppress this message, check
whether the level is 'debug' and if so, suppress it. If this message is
required again, the message can be generated by commenting out this line.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Before this change, the status of the sysfs paths from the kernel events
was cached with a cache file. This is necessary to mark configured modems
as available for the netifd.
Using the new monitor service via the mmcli command 'mmcli -M' simplifies
the whole process. There is no need to start sub shells in the background
anymore that monitors whether the modem has already been added to the
ModemManager.
For this purpose, a new service was added that reacts on add and remove
events for modems in the ModemManager and, if necessary, marks the logical
netifd interface as available.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
These moved functions are general functions. This is a preparatory
commit so that these moved functions can also be used in other
ModemManager scripts.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The modem saves the permitted technology configuration in the modem
itself. If the technology configuration is deleted in the uci, this is
not passed on to the modem. This means that the previously saved
technology configuration is remains in the modem and is therefore still
active. By setting the technology to 'any', if no option is set, all
technologies are allowed again.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Modify Makefile to combine tailscale and tailscaled according to
Tailscale documentatio (https://tailscale.com/kb/1207/small-tailscale)
This resulted for x86_64 in an exec of 31MB + the symlink. Before it
was 29MB (tailscaled) and 10MB (tailscale).
Signed-off-by: Thomas Kupper <thomas.kupper@gmail.com>
0cffba9458d3 treewide: add support for RADIUS Reply-Message
c9fb744fdee8 treewide: add support for 'lang=' & ChilliSpot-Lang
584a162cb19a handler-uam: ensure that 'seconds_remaining' is always set
bd1f7c5de1ae Makefile: align with packages feed one
0ea6ad3c4e54 Makefile: mark uspot-www and uspotfilter "PKGARCH:=all"
e6a286ccfdbf uspot/uspotfilter: use 'logger -t'
427ed16cfde5 uspot: expose ratelimits in client data
4ba1dd9c5135 uspot: don't send NAS-Port-Type
78a37ef49b85 templates: add id="replymsg" to reply msg header
e3f4e179fd17 templates: show remaining time in "connected"
398762dff711 radius-client: correctly use str_to_hex()
730ef800d9da templates: simplify HTML
6bb39282fd8f Documentation update
b6c802adac19 portal: handle_request() logic refactoring
1aa1a5eb28d7 uspotfilter: implement peer_lookup()
ba5547ec61f1 portal: speedup peer lookup by leveraging spotfilter
d551376c29bb templates: added html5 time tag to timeleft output
154c98e0b77b uspotfilter: mark client as active when set()
8dcb03a37a77 uspotfilter: rework neigh management
cfb2ce7909da uspotfilter: use client_remove() where applicable
8411314dbf90 Documentation update
8dacf3df9935 uspot: use a single operation for client removal
297b7857c1e0 uspotfilter: fix DELNEIGH processing
76003917c205 uspotfilter: client_set() only clear idle when allowing
f46a855c5085 uspotfilter: remove botched IPv6 "support"
4ff31cbf0e2b uspot: client_remove(): stay in sync with spotfilter
edc9ad7e60a3 uspot/uspotfilter: use ucode-mod-log for logging
52e24aecf2db uspotfilter: use ucode '??=' syntax
c4b6f2f0bb1e Update README
Update the package Makefile to reflect the changes from the following
above-listed commits:
0ea6ad3c4e54 Makefile: mark uspot-www and uspotfilter "PKGARCH:=all"
edc9ad7e60a3 uspot/uspotfilter: use ucode-mod-log for logging
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
New features for v1.8.0:
1. Migrate cache file from Clash API to independent options
2. Introducing Rule Set
3. Add `sing-box geoip`, `sing-box geosite` and `sing-box rule-set` commands
4. Allow nested logical rules
5. Independent `source_ip_is_private` and `ip_is_private` rules
6. Add context to JSON decode error message
7. Reject internal fake-ip queries
8. Add GSO support for TUN and WireGuard system interface
9. The legacy LWIP stack has been deprecated and removed
10. Add `idle_timeout` for URLTest outbound
11. Added some new uTLS fingerprints
...
Release notes: https://github.com/SagerNet/sing-box/releases/tag/v1.8.0
The new version has some breaking changes and may stop working after upgrading if use the original config.
Please see the migration manual to migrate the config: https://sing-box.sagernet.org/migration/
Signed-off-by: Anya Lin <hukk1996@gmail.com>
Erik Conijn
Fabrice Fontaine
Jan Hák
Van Waholtz
Ray Wang
Dirk Brenken
Tianling Shen
Zephyr Lykos
Florian Eckert
Nikos Mavrogiannopoulos
Otto MoerbeekandTianling Shen
Magnus Kroken
W. Michael Petullo
John Audia
Stan Grishin
Thomas Kupper
Rosen Penev
David Yang
Othmar Truniger
Thibaut VARÈNE
Anya Lin