If the ModemManager process crashes, the interfaces are not cleaned
up properly because the stop_service method is not called. With this
change, the interfaces are cleaned up both when stopping the service
and during a crash. Therefore it is no longer necessary to perform a
cleanup at the beginning.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
Change workflow to cleanup interfaces using the sysfscache.
The sysfscache stores the processed sysfs-paths. Using this
instead of mmcli -L, the interfaces can be properly cleaned
up even if, for example, ModemManager crashes and mmcli is
no longer usable.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
At mm_report_modem_wait a wait status is set. When attempting to report
an event (via hotplug or during startup) and the DBus is not yet available,
the status in the sysfs cache is set to 'processed' incorrectly, even
if mmcli fails.
This is fixed by aborting the operation and logging an error when
the kernel report fails.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
The mm_report_events_from_cache method is called during the startup and
informs the ModemManager of kernel events. Additionally, hotplug scripts
inform the ModemManager of kernel events. Processed events are stored in
the sysfs cache. It is possible for a hotplug script to write to the
sysfs cache while the mm_report_events_from_cache method is still waiting
for the ModemManager to be available on the bus during startup.
This could lead to a misbehavior where modems are not recognized.
To ensure a clean state on startup, the sysfs cache is cleared after the
ModemManager is available, ensuring reliable processing of kernel events.
Signed-off-by: Oliver Sedlbauer <osedlbauer@tdt.de>
The PKG_RELEASE was not incremented during the last merge, the commit shows
that it is incremented by one, but this was already done during the last
change. Very strange. Hence this commit which increments PKG_RELEASE by
one.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
To begin with, there are only a couple of .conf files, and
one of them is for testing, and the other is only installed
when MBIM is enabled, so if you build without MBIM you'll
have a failing install:
install -m0644 /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/ipkg-install/usr/share/ModemManager/*.conf /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/.pkgdir/modemmanager/usr/share/ModemManager
install: cannot stat '/home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/ipkg-install/usr/share/ModemManager/*.conf': No such file or directory
make[2]: *** [Makefile:161: /home/pprindeville/work/openwrt/build_dir/target-x86_64_musl/modemmanager-1.20.6/.pkgdir/modemmanager.installed] Error 1
make[2]: Leaving directory '/home/pprindeville/work/openwrt/feeds/packages/net/modemmanager'
So make sure there's anything there to copy over first.
Signed-off-by: Philip Prindeville <pprindeville@netgate.com>
In order to use the dbus interfaces via the command gdbus-codegen, the
xml files must be copied into the building staging directory, so that other
programmes can use them during compilation.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The line to generate the argument list for 'simple connect' is quite
long and is not maintainable. To improve the handling a function
'append_param' was added for appending the 'simple connect' options.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Francisco Jose Alvarez <francisco.alvarez@galgus.net>
* Update commit head
* Rebase patch to the latest changes
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If on teardown the 'proto_notify_error' is set to 'MM_TEARDOWN_IN_PROGRESS',
then an error which is set on 'setup' is not visible in the ubus
network.interface.<iface> status output.
{
"up": false,
"pending": false,
"available": true,
"autostart": false,
"dynamic": false,
"proto": "modemmanager",
"data": {
},
"errors": [
{
"subsystem": "dualsim",
"code": "MM_TEARDOWN_IN_PROGRESS"
}
]
}
It alway shows the code 'MM_TEARDWON_IN_PROGRESS'!
By removing the line 'proto_notify_error "${interface}" MM_TEARDOWN_IN_PROGRESS'
in teardown, the last error is show in the proto stack from setup.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If an alias name is used for the modem, then a check if the device exists
in sysfs does not work. To fix this remove the check if the sysfs device
exists. The protocoll handler already checks if the modem is responsible
for this device on the next line.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
On small systems with many virtual devices, the modem manager sometimes
could not start because it took too long until all devices for the modem
were recognised. This is because all system events that are stored in
the file events.cache have to be processed. To speed up the processing,
all devices under /sys/devices/virtual are now filtered out so that they
do not have to be processed.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
See commit da370098 "treewide: add support for "gc-sections" in
PKG_BUILD_FLAGS" on the main repository.
Note: This only touches packages which use all three parts
(-ffunction-sections, -fdata-sections and -Wl,--gc-sections) enabled by
this build flag. Some packages only use a subset, and these are left
unchanged for now.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Using https://gitlab.freedesktop.org/mobile-broadband/ModemManager.git to download the source code.
Added compile option to compile qrtr support.
Enabled lto and additional gcc flags for perfomance and less size.
Modified to use meson as upstream has abandoned autotools.
Removed BUILD_PARALLEL options. These are default with ninja/meson.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
The way the init script is written now, we get a bad output when calling
the ubus service backend.
ubus call service list "{'verbose':true,'name':'modemmanager'}"
>{
> "modemmanager": {
> "instances": {
> "instance1": {
> "running": true,
> "pid": 20511,
> "command": [
> "sh",
> "-c",
> ".
>/usr/share/ModemManager/modemmanager.common; \t
>mkdir -m 0755 -p /var/run/modemmanager; \t
>mm_cleanup_interfaces; \t
>( mm_report_events_from_cache ) >/dev/null 2>&1 & \t
>/usr/sbin/ModemManager"
> ],
> "term_timeout": 5,
> "respawn": {
> "threshold": 3600,
> "timeout": 5,
> "retry": 5
> },
> "pidfile":"/var/run/modemmanager/modemmanager.pid"
> }
> }
> }
>}"
I also get the output in the log that the PID file cannot be created.
> daemon.err procd: Failed to remove pidfile: :No such file or directory
The changes in this commit fixes this issues, by moving startup into a
wrapper script.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
WWAN devices may now be exposed in the new 'wwan' subsystem in the
kernel (since 5.13), initially applicable to devices exposed in PCIe
(no USB), but at some point may also apply to USB devices that until
now were exposed via other subsystems (e.g. usbmisc, tty).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
If procd relaunches the ModemManager daemon after e.g. a crash, we
also want it to notify all cached hotplug events, or otherwise we
would end up leaving the daemon running without the full initial
processing done.
This change modifies the init script to include all the required init
commands as part of the procd instance command, so that procd launches
all of them on every respawn.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
When the ModemManager daemon is started by the init script, we're
explicitly calling mm_report_events_from_cache() so that all the
hotplug events that happened before that moment are properly notified
to the newly launched daemon.
This initial reporting of events does a wait for the ModemManager
process to be available in DBus, and if the daemon isn't registered in
the bus in a given time, the process is considered failed:
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:02 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:03 2020 [2180]: <info> ModemManager (version 1.14.6) starting in system bus...
Sun Sep 6 16:20:03 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:04 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:05 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:06 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:07 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:08 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:09 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:10 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:11 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: checking if ModemManager is available...
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: ModemManager not yet available
Sun Sep 6 16:20:12 2020 ModemManager: hotplug: error: couldn't report initial kernel events: ModemManager not running
Update the default wait time for this initial event notification from
10s to 60s, because there are cases where the daemon is slower to
boot, e.g. during the first boot after a sysupgrade.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Added signal refresh rate option
modemmanager: update readme.md
Added description for added proto options.
Added compile option to compile --with-at-command-via-dbus for allowing
AT commands to modem without --debug flag
Changes to be committed:
modified: net/modemmanager/Config.in
modified: net/modemmanager/Makefile
modified: net/modemmanager/files/modemmanager.init
modified: net/modemmanager/files/modemmanager.proto
modified: README.md
Signed-off-by: Valtteri Holopainen <valtsu@gmail.com>
Do not manually overwrite the paths of gdbus-codegen or glib-mkenums
in the ModemManager package build, as modifying the configure.ac ends
up requiring a full autoreconf.
Since MM 1.14, git builds or autoreconf-ed source package builds
require autoconf-archive installed in the build system, and so the
build would fail if this happens.
The update to overwrite the paths was to force using the gdbus-codegen
and glib-mkenums provided by the "host" glib2 package instead of the
"target" glib2 package (see fa8ad6e69c),
but these tools are really the same in both as they're python
programs, arch independent.
Tested in a local build where the setup detects and uses the correct
glib tool paths from the target:
/home/user/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/gdbus-codegen
/home/user/openwrt/staging_dir/target-mips_24kc_musl/usr/bin/glib-mkenums
Fixes https://github.com/openwrt/packages/issues/12958
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Oliver Sedlbauer
Maxim Anisimov
Florian Eckert
Philip Prindeville
Francisco Jose Alvarez
Mladen Milinkovic
Andre Heider
Kuan-Yi Li
Rosen Penev
Aleksander Morgado
Nicholas Smith
Nicholas Smith
Valtteri Holopainen