and also fix build error:
Package ocserv is missing dependencies for the following libraries:
liboath.so.0
Signed-off-by: Thlv Alivs <zgmzzzz18@gmail.com>
Without it, nginx could complain about incompatible dynamic modules
Signed-off-by: Glen Huang <me@glenhuang.com>
[ fix conflict error on cherry-pick ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Introduce support for migration of old uci conf template to new version.
Uci conf template are saved in config backup. This cause problem on config
restore as old config template might have compatibility problem with new
nginx implementation.
Add logic to migrate the template script at runtime to correctly align
to latest change from nginx and nginx-util.
Fixes: 65a676ed56 ("nginx: introduce support for dynamic modules")
Fixes: #20904
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add versioning to UCI conf template as a commented version.
This permits the introduction of migration script since the template is
saved and restored config restore. The migration script are handled by
nginx init.d script.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
OpenVPN supports more hooks than just 'up' and 'down'. Especially
reacting to 'route-up' and 'route-pre-down' events could be important.
When routing table changes, it can make sense to adapt firewall, run
some tests or change even more routes. This change passes those events
to hotplug, so it is easy to react to them without changing
configuration files provided by VPN provider.
Signed-off-by: Michal Hrusecky <michal.hrusecky@turris.com>
Allows user to provide a token for Cloudflare tunnel.
When provided along with credentials, this will take precedence.
Signed-off-by: Scott McKenzie <scott@noizyland.net>
If the build host has the Go compiler installed, then configure will
detect this and will try to compile gensio's Go support, leading to a
build failure.
This disables Go support entirely to fix this build failure.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Update crowdsec to latest upstream release version 1.5.1
Signed-off-by: S. Brusch <ne20002@gmx.ch>
Maintainer: Kerma Gérald <gandalf@gk2.net>
Run tested: ipq40xx/generic, Fritzbox 4040, Openwrt 22.03.5
Description: update to latest version of upstream
musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so
just having _GNU_SOURCE defined is not enough anymore.
Manually pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
_LARGEFILE64_SOURCE has to be defined in the source, or CFLAGS can be used
to pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.
Fixes errors in the form of:
Building targets
github.com/mattn/go-sqlite3
sqlite3-binding.c:35901:42: error: 'pread64' undeclared here (not in a function); did you mean 'pread'?
35901 | { "pread64", (sqlite3_syscall_ptr)pread64, 0 },
| ^~~~~~~
| pread
sqlite3-binding.c:35919:42: error: 'pwrite64' undeclared here (not in a function); did you mean 'pwrite'?
35919 | { "pwrite64", (sqlite3_syscall_ptr)pwrite64, 0 },
| ^~~~~~~~
| pwrite
sqlite3-binding.c: In function 'seekAndRead':
sqlite3-binding.c:35905:49: error: unknown type name 'off64_t'; did you mean 'off_t'?
35905 | #define osPread64 ((ssize_t(*)(int,void*,size_t,off64_t))aSyscall[10].pCurrent)
| ^~~~~~~
sqlite3-binding.c:38767:11: note: in expansion of macro 'osPread64'
38767 | got = osPread64(id->h, pBuf, cnt, offset);
| ^~~~~~~~~
sqlite3-binding.c:35905:58: error: expected ')' before 'aSyscall'
35905 | #define osPread64 ((ssize_t(*)(int,void*,size_t,off64_t))aSyscall[10].pCurrent)
| ~ ^~~~~~~~
sqlite3-binding.c:38767:11: note: in expansion of macro 'osPread64'
38767 | got = osPread64(id->h, pBuf, cnt, offset);
| ^~~~~~~~~
sqlite3-binding.c: In function 'seekAndWriteFd':
sqlite3-binding.c:35923:57: error: unknown type name 'off64_t'; did you mean 'off_t'?
35923 | #define osPwrite64 ((ssize_t(*)(int,const void*,size_t,off64_t))\
| ^~~~~~~
sqlite3-binding.c:38896:17: note: in expansion of macro 'osPwrite64'
38896 | do{ rc = (int)osPwrite64(fd, pBuf, nBuf, iOff);}while( rc<0 && errno==EINTR);
| ^~~~~~~~~~
sqlite3-binding.c:35924:21: error: expected ')' before 'aSyscall'
35924 | aSyscall[13].pCurrent)
| ^~~~~~~~
sqlite3-binding.c:38896:17: note: in expansion of macro 'osPwrite64'
38896 | do{ rc = (int)osPwrite64(fd, pBuf, nBuf, iOff);}while( rc<0 && errno==EINTR);
| ^~~~~~~~~~
sqlite3-binding.c:35923:21: note: to match this '('
35923 | #define osPwrite64 ((ssize_t(*)(int,const void*,size_t,off64_t))\
| ^
sqlite3-binding.c:38896:17: note: in expansion of macro 'osPwrite64'
38896 | do{ rc = (int)osPwrite64(fd, pBuf, nBuf, iOff);}while( rc<0 && errno==EINTR);
| ^~~~~~~~~~
make[2]: *** [Makefile:153: /home/nick/openwrt/build_dir/target-aarch64_cortex-a53_musl/crowdsec-1.4.6/.built] Error 1
make[2]: Leaving directory '/home/nick/openwrt/feeds/packages/net/crowdsec'
Signed-off-by: Nick Hainke <vincent@systemli.org>
musl 1.2.4 deprecated legacy "LFS64" ("large file support") interfaces so
just having _GNU_SOURCE defined is not enough anymore.
Manually pass -D_LARGEFILE64_SOURCE to allow to keep using LFS64 definitions.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
OpenSSH 9.1p1 removed remaining dependencies and stopped linking sftp,
sftp-server and scp against libcrypto or libz. This change moves those
package dependencies from the default to those that still need them.
In particular, this will allow sftp-server to be installed for use with
Dropbear without needing to install zlib or openssl.
Signed-off-by: Darren Tucker <dtucker@dtucker.net>
fa35c29 Xtables-addons 3.24
9db4d8d DHCPMAC: resolve cppcheck warnings
4599c30 ipv4options: resolve cppcheck warnings
5a714b6 geoip: set autoflush on stdout
f16ed5c geoip: Use stdout for output and stderr for errors/diag
a711985 build: resolve compiler warnings with gcc-13
97181e3 doc, src: improve spelling
30ddb4f doc, src: improve spelling
f3f8155 xt_geoip: bump number of territories per rule
e426ad9 Xtables-addons 3.23
51761c3 build: support for Linux 6.2
409cb5a build: replace `AC_DISABLE_STATIC` macro with an argument to `LT_INIT`
0454ff6 build: replace obsolete `AC_PROG_LIBTOOL` macro with `LT_INIT`
5b3fae8 Xtables-addons 3.22
71396f9 build: support for Linux 6.1
7ad55ad build: eliminate geoip/ make recursion
b950dae build: fix failure to recurse into asn/
cd77880 xt_asn: new module
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
[ add changelog from 3.21 to 3.24 ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Use kcalloc and remove conflicting #include <stdarg.h> to fix
the following build warnings treated as errors since b2d1eb7:
error: ISO C90 forbids variable length array 'buf' [-Werror=vla]
error: "va_start" redefined [-Werror]
error: "va_arg" redefined [-Werror]
error: "va_copy" redefined [-Werror]
getstr(s)==NULL is always false
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/byte_array.c: In function 'byte_array_to_string':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/byte_array.c:110:9: error: ISO C90 forbids variable length array 'buf' [-Werror=vla]
110 | uint8_t buf[(array->length * 3) + 255];
| ^~~~~~~
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/byte_array.c:112:9: error: ISO C90 forbids variable length array 'res' [-Werror=vla]
112 | char res[255 + (array->length * 3)]; /* make sure the buffer is big enough*/
| ^~~~
cc1: all warnings being treated as errors
In file included from ./include/linux/string.h:9,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/include/string.h:1,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/ldebug.c:10:
./include/linux/stdarg.h:6: error: "va_start" redefined [-Werror]
6 | #define va_start(v, l) __builtin_va_start(v, l)
|
CC [M] /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lstrlib.o
In file included from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/ldebug.c:8:
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:47: note: this is the location of the previous definition
47 | #define va_start(v,l) __builtin_va_start(v,l)
|
./include/linux/stdarg.h:8: error: "va_arg" redefined [-Werror]
8 | #define va_arg(v, T) __builtin_va_arg(v, T)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:49: note: this is the location of the previous definition
49 | #define va_arg(v,l) __builtin_va_arg(v,l)
|
./include/linux/stdarg.h:9: error: "va_copy" redefined [-Werror]
9 | #define va_copy(d, s) __builtin_va_copy(d, s)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:52: note: this is the location of the previous definition
52 | #define va_copy(d,s) __builtin_va_copy(d,s)
|
CC [M] /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/ltable.o
In file included from ./include/linux/kernel.h:5,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/luaconf.h:16,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:15,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/ldump.c:12:
./include/linux/stdarg.h:6: error: "va_start" redefined [-Werror]
6 | #define va_start(v, l) __builtin_va_start(v, l)
|
In file included from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:12:
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:47: note: this is the location of the previous definition
47 | #define va_start(v,l) __builtin_va_start(v,l)
|
./include/linux/stdarg.h:8: error: "va_arg" redefined [-Werror]
8 | #define va_arg(v, T) __builtin_va_arg(v, T)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:49: note: this is the location of the previous definition
49 | #define va_arg(v,l) __builtin_va_arg(v,l)
|
./include/linux/stdarg.h:9: error: "va_copy" redefined [-Werror]
9 | #define va_copy(d, s) __builtin_va_copy(d, s)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:52: note: this is the location of the previous definition
52 | #define va_copy(d,s) __builtin_va_copy(d,s)
|
In file included from ./include/linux/kernel.h:5,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/luaconf.h:16,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:15,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lfunc.c:13:
./include/linux/stdarg.h:6: error: "va_start" redefined [-Werror]
6 | #define va_start(v, l) __builtin_va_start(v, l)
|
In file included from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:12:
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:47: note: this is the location of the previous definition
47 | #define va_start(v,l) __builtin_va_start(v,l)
|
./include/linux/stdarg.h:8: error: "va_arg" redefined [-Werror]
8 | #define va_arg(v, T) __builtin_va_arg(v, T)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:49: note: this is the location of the previous definition
49 | #define va_arg(v,l) __builtin_va_arg(v,l)
|
./include/linux/stdarg.h:9: error: "va_copy" redefined [-Werror]
9 | #define va_copy(d, s) __builtin_va_copy(d, s)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:52: note: this is the location of the previous definition
52 | #define va_copy(d,s) __builtin_va_copy(d,s)
|
In file included from ./include/linux/kernel.h:5,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/luaconf.h:16,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:15,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lmem.c:13:
./include/linux/stdarg.h:6: error: "va_start" redefined [-Werror]
6 | #define va_start(v, l) __builtin_va_start(v, l)
|
In file included from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:12:
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:47: note: this is the location of the previous definition
47 | #define va_start(v,l) __builtin_va_start(v,l)
|
./include/linux/stdarg.h:8: error: "va_arg" redefined [-Werror]
8 | #define va_arg(v, T) __builtin_va_arg(v, T)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:49: note: this is the location of the previous definition
49 | #define va_arg(v,l) __builtin_va_arg(v,l)
|
./include/linux/stdarg.h:9: error: "va_copy" redefined [-Werror]
9 | #define va_copy(d, s) __builtin_va_copy(d, s)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:52: note: this is the location of the previous definition
52 | #define va_copy(d,s) __builtin_va_copy(d,s)
|
In file included from ./include/linux/kernel.h:5,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/include/stdio.h:1,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lobject.c:10:
./include/linux/stdarg.h:6: error: "va_start" redefined [-Werror]
6 | #define va_start(v, l) __builtin_va_start(v, l)
|
In file included from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lobject.c:7:
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:47: note: this is the location of the previous definition
47 | #define va_start(v,l) __builtin_va_start(v,l)
|
./include/linux/stdarg.h:8: error: "va_arg" redefined [-Werror]
8 | #define va_arg(v, T) __builtin_va_arg(v, T)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:49: note: this is the location of the previous definition
49 | #define va_arg(v,l) __builtin_va_arg(v,l)
|
./include/linux/stdarg.h:9: error: "va_copy" redefined [-Werror]
9 | #define va_copy(d, s) __builtin_va_copy(d, s)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:52: note: this is the location of the previous definition
52 | #define va_copy(d,s) __builtin_va_copy(d,s)
|
In file included from ./include/linux/kernel.h:5,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/luaconf.h:16,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:15,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/llimits.h:12,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lopcodes.h:10,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lopcodes.c:11:
./include/linux/stdarg.h:6: error: "va_start" redefined [-Werror]
6 | #define va_start(v, l) __builtin_va_start(v, l)
|
In file included from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:12:
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:47: note: this is the location of the previous definition
47 | #define va_start(v,l) __builtin_va_start(v,l)
|
./include/linux/stdarg.h:8: error: "va_arg" redefined [-Werror]
8 | #define va_arg(v, T) __builtin_va_arg(v, T)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:49: note: this is the location of the previous definition
49 | #define va_arg(v,l) __builtin_va_arg(v,l)
|
./include/linux/stdarg.h:9: error: "va_copy" redefined [-Werror]
9 | #define va_copy(d, s) __builtin_va_copy(d, s)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:52: note: this is the location of the previous definition
52 | #define va_copy(d,s) __builtin_va_copy(d,s)
|
In file included from ./include/linux/kernel.h:5,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/luaconf.h:16,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:15,
from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lstate.c:13:
./include/linux/stdarg.h:6: error: "va_start" redefined [-Werror]
6 | #define va_start(v, l) __builtin_va_start(v, l)
|
In file included from /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/lua.h:12:
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:47: note: this is the location of the previous definition
47 | #define va_start(v,l) __builtin_va_start(v,l)
|
./include/linux/stdarg.h:8: error: "va_arg" redefined [-Werror]
8 | #define va_arg(v, T) __builtin_va_arg(v, T)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:49: note: this is the location of the previous definition
49 | #define va_arg(v,l) __builtin_va_arg(v,l)
|
./include/linux/stdarg.h:9: error: "va_copy" redefined [-Werror]
9 | #define va_copy(d, s) __builtin_va_copy(d, s)
|
/home/ansuel/openwrt-ansuel/openwrt/staging_dir/toolchain-aarch64_cortex-a53_gcc-12.2.0_musl/lib/gcc/aarch64-openwrt-linux-musl/12.2.0/include/stdarg.h:52: note: this is the location of the previous definition
52 | #define va_copy(d,s) __builtin_va_copy(d,s)
|
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/ldump.c: In function 'DumpString':
/home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/xtables-addons-3.21/extensions/LUA/lua/ldump.c:63:26: error: the comparison will always evaluate as 'false' for the pointer operand in 's + 24' must not be NULL [-Werror=address]
63 | if (s==NULL || getstr(s)==NULL)
| ^~
cc1: all warnings being treated as errors
Fixes: #20993Fixes: #21006
Co-developed-by: Chen Minqiang <ptpt52@gmail.com>
Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Georgi Valkov <gvalkov@gmail.com>
aardvark-dns is companion for netavark, recent cni replacement on podman
git version used instead of release, to maintain maximal compatibility
with netavark, also using git version.
Description:
Aardvark-dns is an authoritative dns server for A/AAAA container records.
It can forward other requests to configured resolvers.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
podman is moving from cni to netavark. Netavark supports currently
only iptables, so I was in touch some time ago with mainstream
maintainer and provided a "none" firewall driver - to make it possible
to use netavark without firewalling features. Driver cannot be selected
at this time without environment variable that selects it, so I made
a config file for openwrt and a wrapper script that takes advantage of
it.
Available options are iptables, nftables and none - but selecting
nftables just tells user that nftables isn't yet supported.
firewall "none" driver is not yet included in release, so that's why
we use git version instead. I chose latest commit instead of commit
with none driver.
Description:
Netavark is a rust based network stack for containers.
It is being designed to work with Podman but is also applicable for other OCI container management applications.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Fix compilation warning for stack limit and variable length array.
Fix compilation warning:
CC [M] /home/ansuel/openwrt-ansuel/openwrt/build_dir/target-aarch64_cortex-a53_musl/linux-ipq807x_generic/siit-1.2/siit.o
../siit-1.2/siit.c: In function 'ip4_fragment':
../siit-1.2/siit.c:988:9: error: ISO C90 forbids variable length array 'buff' [-Werror=vla]
988 | char buff[FRAG_BUFF_SIZE+hdr_len]; /* buffer to form new fragment packet */
| ^~~~
../siit-1.2/siit.c: In function 'siit_xmit':
../siit-1.2/siit.c:1359:1: error: the frame size of 2144 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
1359 | }
| ^
cc1: all warnings being treated as errors
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
wolfssl has been the base TLS library in openwrt since 21.02
mbedtls will once again be the base TLS library in openwrt 23.??
Default to mbedtls for digest functions in lighttpd
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
The next version of lighttpd will move HTTP/2 support from the lighttpd
base executable into a separate module: mod_h2
Include patch to do so now, and update packaging to handle it.
HTTP/2 support is enabled by default since lighttpd 1.4.59, but if
HTTP/2 support is explicitly disabled in the configuration, then mod_h2
will not be loaded, thereby reducing lighttpd memory use.
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
wolfssl has been a base TLS library in openwrt since 21.02
Default to wolfssl instead of Nettle for digest functions in lighttpd
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
* made the fetch utility function/autodetection more bullet proof
* no longer add suspicious IPs to the local blocklist when the nft set timeout has been set
* restructure internal functions & small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add missing space in str_contains
* unquote variable to make sure IPv6 rotues are added
* add IPv6 routes display to status output in nft mode
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Function start_service() is called whenever service may need reloading.
If SMB server is not running it could be simply because it has been
stopped. Reloading service in such case is not an error so:
1. Don't log error as it isn't one
2. Don't exit with error code as it was confusing procd
This change fixes scenario like:
/etc/init.d/ksmbd stop
/etc/init.d/wsdd2 reload
(previously above wasn't stopping wsdd2)
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Thlv Alivs
Marius Dinu
Zephyr Lykos
Glen Huang
Christian Marangi
Michal Hrusecky
W. Michael Petullo
Tianling Shen
Scott McKenzie
Ray Wang
Jeffery To
Daniel Golle
Nick Hainke
S. Brusch
Darren Tucker
Lucian Cristian
Dirk Brenken
Andrew Sim
Georgi Valkov
Stan Grishin
Oskari Rauta
Glenn Strauss
Nikos Mavrogiannopoulos
Rafał Miłecki