exposes PoE metrics obtained from realtek-poe
# HELP realtek_poe_switch_info information about the poe controller
# TYPE realtek_poe_switch_info gauge
realtek_poe_switch_info{mcu="ST Micro ST32F100 Microcontroller",firmware="v22.4"} 1
# HELP realtek_poe_switch_budget_watts overall power budget
# TYPE realtek_poe_switch_budget_watts gauge
realtek_poe_switch_budget_watts 77
# HELP realtek_poe_switch_consumption_watts overall power consumption
# TYPE realtek_poe_switch_consumption_watts gauge
realtek_poe_switch_consumption_watts 5
# HELP realtek_poe_port_priority poe priority of port
# TYPE realtek_poe_port_priority gauge
realtek_poe_port_priority{device="lan1"} 1
realtek_poe_port_priority{device="lan2"} 1
[...]
# HELP realtek_poe_port_consumption_watts per port power consumption
# TYPE realtek_poe_port_consumption_watts gauge
realtek_poe_port_consumption_watts{device="lan1"} 0
realtek_poe_port_consumption_watts{device="lan2"} 0
[...]
# HELP realtek_poe_port_state per port poe state
# TYPE realtek_poe_port_state gauge
realtek_poe_port_state{device="lan1",state="Disabled"} 0
realtek_poe_port_state{device="lan1",state="Searching"} 1
[...]
(states: Disabled, Searching, Delivering power, Fault, Other fault, Requesting power)
# HELP realtek_poe_port_mode per port poe mode
# TYPE realtek_poe_port_mode gauge
realtek_poe_port_mode{device="lan1",mode="PoE"} 0
realtek_poe_port_mode{device="lan1",mode="PoE+"} 1
[...]
(modes: PoE, Legacy, pre-PoE+, PoE+)
Signed-off-by: Gregor Michels <hirnpfirsich@brainpeach.de>
The realtek-poe package is used to configure the Power-over-Ethernet
controller found on Realtex 838x based switches. On many such
switches, the PoE doesn't work without this package.
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
The domoticz init script didn't properly read the "disabled"
configuration parameter and instead the service was always started.
Signed-off-by: Robert Högberg <robert.hogberg@gmail.com>
hfsprogs uses libbsd for strlcpy(), but the strlcpy() calls are inside
`#ifdef` and don't show up on the OpenWRT package.
Signed-off-by: Guilherme Janczak <guilherme.janczak@yandex.com>
Use PKG_FIXUP:=autoreconf when building cryptsetup to prevent
accidental linkage against host libraries.
Fixes: #19011
Reported-by: @dreirund
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
What's Changed:
- Enhancements:
- add support of environment secret during build step by @glours
- Fixes:
- networks: prevent issues due to duplicate names by @milas
- Use appropriate dependency condition for one-shot containers when
running compose up --wait by @laurazard
- Fix environment variable expansion by @ulyssessouza in
compose-spec/compose-go#276
- Validate depended-on services exist in consistency check by
@laurazard in compose-spec/compose-go#281
- Fix hash usage in environment values by @ulyssessouza in
compose-spec/compose-go#283
- build: respect dependency order for classic builder by @milas
- fix: panic caused by empty string argument by @nicksieger
- (re)start should not impact one-off containers by @ndeloof
- Fix issue with close networks name on up and down command by
@glours
- keep the container reference when volumes_from target a container
and not a service by @glours
- build.go: initialize CustomLabels map if nil by @paroque28
Signed-off-by: Javier Marcet <javier@marcet.info>
Fixes compilation when libiconv is missing.
Also remove pthread from glibc. No longer needed.
Cleanup Makefile for consistency between packages.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Upstream bump and add a patch to use a blue highlight color for the dark
color scheme (--color dark) as some users find the default bright green is
too intense.
Note that invoking ncdu without the --color switch at use uses the upstream
default bright green, so users will need to call ncdu with --color dark in
order to get the blue color.
Signed-off-by: John Audia <therealgraysky@proton.me>
Enhancements:
- Support for setting secret from env variable by @ndeloof
Fixes:
- Do not start unrelated dependencies on run by @laurazard
- Fix service not found errors when using --no-deps by @nicksieger
- Respect COMPOSE_REMOVE_ORPHANS env var on down by @nicksieger
- Fix project level bind mounts volumes by @ulyssessouza
- Respect deploy.limits.cpus and deploy.limits.pids by @glours
Internal:
- Upgrade: Go v1.18.3 by @thaJeztah
- Upgrade: compose-go v1.2.8 by @milas
- Upgrade: buildx v0.8.2 by @dependabot
- Upgrade: containerd v1.6.6 by @dependabot
Signed-off-by: Javier Marcet <javier@marcet.info>
otherwise, a user would have to either manually run /etc/init.d/lxc-auto
boot or reboot the system to start using lxc.
originally committed in 2cde10b950
reverted in 039912dec5
Signed-off-by: Michal Vasilek <michal.vasilek@nic.cz>
Allow the user to specify the level at which irqbalance assumes the cache
domains are partitioned. Keep the default value of 2.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
- Handle bool values correctly. We get the values as bool, but collectd
requires a bool value to be numeric in the range [0, 1].
- Remove profile and mode values. Those are strings, which cannot be
represented by collectd.
- Update collectd type for some values.
- Fix latn value being present twice.
Signed-off-by: Dominik Riebeling <bluebrother@posteo.de>
Tested lantiq/xrx200
Maintainer: Markus Weipert suggested to hand over to me, thank you!
Compile tested: SDK for OpenWrt 21.02.3
Run tested: xRX200 rev 1.2, AVM FRITZ!Box 7360 V2, OpenWrt 21.02.3
Description:
Updated to version 0.13.1
Signed-off-by: Tom Stöveken <tom@naaa.de>
write_http plugin is already built and shipped in
collectd-mod-write_http, however it is not possible to configure it via
uci currently, instead having to rely on populating the config file manually.
Add support by adding 2 functions, process_write_http() and
process_write_http_node(). First one just enables/disables the plugin.
The second one, in the spirit of the curl plugin, adds support for
populating multiple <Node> elements under <Plugin write_http> with
support for a few parameters. Those are:
* name. The name of the <Node>. Mandatory
* URL. Mandatory
* Format. Optional.
* User. Optional.
* Password. Optional.
* Timeout. Optional.
* BufferSize. Optional.
Signed-off-by: Alexandros Kosiaris <akosiaris@gmail.com>
Etienne Champetier
Gregor Michels
Alexandru Ardelean
Nick Hainke
Tianling Shen
Philip Prindeville
Clark Wang
Javier Marcet
Hannu Nyman
Aleksander Jan Bajkowski
Michal Kowalski
Alexandru Gagniuc
Robert Högberg
Rosen Penev
Guilherme Janczak
Jitao Lu
Jonathan Pagel
Gerard Ryan
Daniel Golle
John Audia
John Kohl
Jonathan Davies
Maxim Storchak
Michal Vasilek
Florian Eckert
Rui Salvaterra
Dominik Riebeling
Tom Stöveken
Alexandros Kosiaris