openwrt-mirror/openwrt
1
0 Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2026-10-12 17:48:12 +04:00
Code Issues Packages Projects Releases Wiki Activity

mediatek: add support for JioRouter AX6000 JIDU6J01

Browse Source 
| Component        | Details                                        |
|------------------|------------------------------------------------|
| **SoC**          | MediaTek MT7986A (4× ARM Cortex-A53 @ 2.0 GHz) |
| **RAM**          | 512 MB                                         |
| **Flash**        | 256 MB NAND                                    |
| **Ethernet**     | 5× 10/100/1000 Mbps (1 WAN + 4 LAN)            |
| **WLAN 2.4 GHz** | MediaTek MT7976GN — 802.11b/g/n/ax, 4×4 MIMO   |
| **WLAN 5 GHz**   | MediaTek MT7976AN — 802.11n/ac/ax, 4×4 MIMO    |
| **LEDs**         | 1× RGB LED (GPIO-controlled)                   |
| **Button**       | 1× Reset                                       |
| **USB**          | Yes                                            |

**MAC Addresses:**

| Interface  | Source                                          |
|------------|-------------------------------------------------|
| WAN/Label  | MFG MTD partition (variant-specific fallback)   |
| LAN        | WAN + 1                                         |
| 2.4 GHz    | WAN + 2                                         |
| 5 GHz      | WAN + 3                                         |

Supported variants and MAC source:
- JIDU6J01,JIDU6201: binary at offset 0x00
- JIDU6401: binary at offset 0x20
- JIDU6601: ASCII text at offset 0x1d0
- JIDU6701: ASCII mac= key

---

**1. Extracting U-Boot Credentials**
The U-Boot username and password are stored in the `MFG` partition. To retrieve them:
- With root access on stock OS: Read directly from the MFG partition.
- Without root access: Dump the NAND flash first, then extract the credentials from the dump.

**2. Prepare TFTP server**
- Set a static IP on the ethernet interface of your computer
  (e.g. default: ip `192.168.1.2`, gateway `192.168.1.1`).
- Download the initramfs image and host it with the TFTP server.

**3. Interrupt boot**

Attach UART and power on the router. When the boot menu appears, select **Failsafe Mode**,
then press `Ctrl-C` to interrupt and enter the credentials extracted from `MFG` partition.

**4. Load and run initramfs image**
```sh
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.2
tftpboot 0x46000000 openwrt-mediatek-filogic-jiorouter_ax6000-jidu6j01-initramfs-kernel.bin
fdt addr $(fdtcontroladdr)
fdt rm /signature
bootm
```

**5. Flash sysupgrade image**

Place the sysupgrade image in `/tmp`, then run:
```sh
sysupgrade /tmp/openwrt-mediatek-filogic-jiorouter_ax6000-jidu6j01-squashfs-sysupgrade.bin
```
Alternatively, use the sysupgrade option in LuCI.

Signed-off-by: Sheikh Faisal <sheikhfaisal713@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23510
(cherry picked from commit 552e617bd0)
Link: https://github.com/openwrt/openwrt/pull/25095
Signed-off-by: Jonas Jelonek <jonas@jonasjelonek.de>
This commit is contained in:
Sheikh Faisal authored and Jonas Jelonek committed 2026-09-22 21:45:49 +02:00
1 parent 1017574c7a
commit 363256ce99
6 files changed
+132 -3
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic
+2 -1
View File
@@ -141,7 +141,8 @@ gatonetworks,gdsp)
glinet,gl-mt3000)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
;;
jiorouter,ax6000-jidu6101)
jiorouter,ax6000-jidu6101|\
jiorouter,ax6000-jidu6j01)
. /lib/upgrade/nand.sh
envubi=$(nand_find_ubi ubi)
envdev=/dev/$(nand_find_volume "$envubi" u-boot-env)
target/linux/mediatek/dts/mt7986a-jiorouter-ax6000-jidu6j01.dts
+53
View File
@@ -0,0 +1,53 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include "mt7986a-jiorouter-common.dtsi"
/ {
compatible = "jiorouter,ax6000-jidu6j01", "mediatek,mt7986a";
model = "JioRouter AX6000 JIDU6J01";
};
&switch {
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "wan";
};
port@1 {
reg = <1>;
label = "lan1";
};
port@2 {
reg = <2>;
label = "lan2";
};
port@3 {
reg = <3>;
label = "lan3";
};
port@4 {
reg = <4>;
label = "lan4";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+24
View File
@@ -285,6 +285,30 @@ mediatek_setup_macs()
wan_mac=$label_mac
lan_mac=$(macaddr_add "$label_mac" 1)
;;
jiorouter,ax6000-jidu6j01)
local mfg_dev
local model
mfg_dev=$(find_mtd_chardev "MFG")
[ -z "$mfg_dev" ] && return
model=$(dd if="$mfg_dev" bs=1024 count=1 2>/dev/null | strings | grep -o -m1 'JIDU[0-9A-Z][0-9A-Z]*')
case "$model" in
JIDU6401)
label_mac=$(get_mac_binary "$mfg_dev" 0x20)
;;
JIDU6601)
label_mac=$(mtd_get_mac_text "MFG" 0x1d0)
;;
JIDU6701)
label_mac=$(mtd_get_mac_ascii "MFG" mac)
;;
*)
label_mac=$(get_mac_binary "$mfg_dev" 0)
;;
esac
[ -n "$label_mac" ] || return
wan_mac=$label_mac
lan_mac=$(macaddr_add "$label_mac" 1)
;;
mercusys,mr80x-v3|\
mercusys,mr85x)
mac_dirty=$(cat "/tmp/tp_data/default-mac" | sed -n 's/^'"MAC"'://p')
target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
+22
View File
@@ -176,6 +176,28 @@ case "$board" in
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
;;
jiorouter,ax6000-jidu6j01)
mfg_dev=$(find_mtd_chardev "MFG")
[ -z "$mfg_dev" ] && exit 0
model=$(dd if="$mfg_dev" bs=1024 count=1 2>/dev/null | strings | grep -o -m1 'JIDU[0-9A-Z][0-9A-Z]*')
case "$model" in
JIDU6401)
label_mac=$(get_mac_binary "$mfg_dev" 0x20)
;;
JIDU6601)
label_mac=$(mtd_get_mac_text "MFG" 0x1d0)
;;
JIDU6701)
label_mac=$(mtd_get_mac_ascii "MFG" mac)
;;
*)
label_mac=$(get_mac_binary "$mfg_dev" 0)
;;
esac
[ -n "$label_mac" ] || exit 0
[ "$PHYNBR" = "0" ] && macaddr_add $label_mac 2 > /sys${DEVPATH}/macaddress
[ "$PHYNBR" = "1" ] && macaddr_add $label_mac 3 > /sys${DEVPATH}/macaddress
;;
keenetic,kap-630|\
keenetic,kn-3711|\
keenetic,kn-3811|\
target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+4 -2
View File
@@ -236,7 +236,8 @@ platform_do_upgrade() {
cudy,wr3000p-v1|\
huasifei,wh3000-pro-nand|\
huasifei,wh3000r-nand|\
jiorouter,ax6000-jidu6101)
jiorouter,ax6000-jidu6101|\
jiorouter,ax6000-jidu6j01)
CI_UBIPART="ubi"
nand_do_upgrade "$1"
;;
@@ -487,7 +488,8 @@ platform_pre_upgrade() {
buffalo,wsr-6000ax8)
buffalo_initial_setup
;;
jiorouter,ax6000-jidu6101)
jiorouter,ax6000-jidu6101|\
jiorouter,ax6000-jidu6j01)
jiorouter_initial_setup
;;
xiaomi,mi-router-ax3000t|\
target/linux/mediatek/image/filogic.mk
+27
View File
@@ -2099,6 +2099,33 @@ define Device/jiorouter_ax6000-jidu6101
endef
TARGET_DEVICES += jiorouter_ax6000-jidu6101
define Device/jiorouter_ax6000-jidu6j01
DEVICE_VENDOR := JioRouter
DEVICE_MODEL := AX6000
DEVICE_VARIANT := JIDU6J01
DEVICE_ALT0_VENDOR := JioRouter
DEVICE_ALT0_MODEL := AX6000
DEVICE_ALT0_VARIANT := JIDU6201
DEVICE_ALT1_VENDOR := JioRouter
DEVICE_ALT1_MODEL := AX6000
DEVICE_ALT1_VARIANT := JIDU6401
DEVICE_ALT2_VENDOR := JioRouter
DEVICE_ALT2_MODEL := AX6000
DEVICE_ALT2_VARIANT := JIDU6601
DEVICE_ALT3_VENDOR := JioRouter
DEVICE_ALT3_MODEL := AX6000
DEVICE_ALT3_VARIANT := JIDU6701
DEVICE_DTS := mt7986a-jiorouter-ax6000-jidu6j01
DEVICE_DTS_DIR := ../dts
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
UBINIZE_OPTS := -E 5
UBOOTENV_IN_UBI := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
TARGET_DEVICES += jiorouter_ax6000-jidu6j01
define Device/kebidumei_ax3000-u22
DEVICE_VENDOR := Kebidumei
DEVICE_MODEL := AX3000-U22