This commit adds U-Boot for Qihoo 360T7 (UBI layout).
Aims:
1. +20 MB additional free space for the packages;
2. More reliable storage for the factory and fip partitions (in UBI).
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22797
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Enable static key (jump label) on all supported architectures. This
lowers overhead and stress on the branch prediction of the CPU and
generally makes the kernel faster.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23073
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
mediatek,mtd-eeprom predates nvmem and is being phased out.
At first glance, it looks like it's doing something useful with its
big-endian binding. However on further inspection, big-endian is handled
in the same function that mediatek,mtd-eeprom is handled. In addition,
the older mtd_read way of extracting the firmware byteswaps the data
on big endian hosts which big-endian byteswaps back. nvmem does not do
such byteswapping.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23115
Signed-off-by: Robert Marko <robimarko@gmail.com>
This was not refresh before because of a merge race.
Fixes: 4c942c06b8 ("kernel: bump 6.18 to 6.18.27")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Allwinner T113-s3 (sun8i) SoC features a dual-core Cortex-A7 ARM CPU and
128MB of DDR3 memory in the same physical package. It supports industrial
temperature ranges. Most of the IP blocks are shared with the D1/D1s core.
There are multiple variants of the SoC, which may vary in the included memory
size, with some of them including a C906 RISC-V co-processor.
Boards supported:
- MangoPi MQDual T113
- wireless-only (RTL8723DS)
- MYIR MYD-YT113 eMMC
- 1Gbit ethernet (Motorcomm YT8531 PHY)
- 4GByte eMMC
- M.2-type slot for 4G/5G cards, plus 2x SIM slot
- USB 2.0 ports
- GPIO/I2C/SPI/CAN ports
- FNLink 6131 (rtl8733bu) wifi module
- MYIR MYD-YT113 SPI
- Same as above but with 256Mbyte SPI-NAND flash instead of eMMC
- Rongpin RP-T113
- 100Mbit ethernet (ICplus IP101GR PHY)
- miniPCIe slot for 4G cards, plus 1x SIM slot
- 3x USB 2.0 ports
- RTL8723BS wireless
- HYM8563 RTC
- GPIO/I2C/SPI/CAN ports
- Olimex T113-Olinuxino
- 100Mbit ethernet (ICplus IP101GR)
- UEXT connector (GPIO/I2C/SPI ports)
- 1x USB 2.0
- audio jack, LEDC
Installation:
Use the standard sunxi installation to an SD-card.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
A script was ran that checks the label-mac-device node to see if it has
nvmem definitions as label-mac-device requires nvmem.
This is mostly a change to make the script happy. No indended functional
difference.
Add a change to qca9533_yuncore_cpe830.dts adding an nvmem definition to
wmac. Seems to have been some kind of oversight where it's specified in
nvmem but not used. label-mac-device needs an NVMEM definition.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22907
Signed-off-by: Robert Marko <robimarko@gmail.com>
rebuilding x86 did fail in an existing build directory
mkdir fails if the folder exists already
Signed-off-by: Sander Schutten <schutten@hotmail.com>
Signed-off-by: Florian Maurer <fmaurer@disroot.org>
The ucode migration wrote "basic_rate" into the wpa_supplicant network
block, but that is not a valid wpa_supplicant network field, causing:
Line 15: unknown network field 'basic_rate'.
failed to parse network block.
Map UCI basic_rate to the correct wpa_supplicant fields, matching the
behavior of the legacy shell script (hostapd.sh):
- mesh mode: mesh_basic_rates (space-separated, 100 kb/s units)
- sta/adhoc: rates (comma-separated Mbps)
Link: https://github.com/openwrt/openwrt/commit/a854d833eabdbc3b42065927c136d75b981a1021
Signed-off-by: Florian Maurer <f.maurer@outlook.de>
[fix commit message link]
Signed-off-by: David Bauer <mail@david-bauer.net>
On 25.12.0 the device has not enough free blocks to initialize overlay.
Move the device to tiny target and consume backup with storage
partitions, which were previously unused. This operation will reclaim
~800 KiB of flash memory. OEM used storage partition for configuration,
while backup was used to store copy of U-Boot environment and copy of
calibration data.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Partially revert 5e3a602def. Unfortunately the ethaddr value in U-Boot
environment is enclosed in double quotes which makes it longer than
ETH_ALEN, thus nvmem returns EINVAL. Switch back to handling the MAC
addresses in user space.
Fixes: 5e3a602def ("ath79: sitecom,wlrx100: use nvmem")
Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
The ath9k driver creates an ath9k LED by default. Instead of having a
non functional LED, configure it properly and remove the extra as it's
not needed.
It's also a bit funny matching against phy0 and phy1 when both differ
between ath9k and ath10k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
Normally WMAC handles 2.4ghz on ath79 devices. Some older units though
handle 5ghz on WMAC and 2.4ghz on pcie. This can be seen by the
frequemcy limits placed on each interface.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
The ath9k driver creates an ath9k LED by default. Instead of having a
non functional LED, configure it properly and remove the extra as it's
not needed.
It's also a bit funny matching against phy0 and phy1 when both differ
between ath9k and ath10k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
The ath9k driver creates an ath9k LED by default. Instead of having a
non functional LED, configure it properly and remove the extra as it's
not needed.
It's also a bit funny matching against phy0 and phy1 when both differ
between ath9k and ath10k.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23191
Signed-off-by: Robert Marko <robimarko@gmail.com>
RTL930x and RTL931x program the same physical SerDes IP mode field
(page 0x1f reg 0x09, bits 11:7 hold the 5-bit mode value, bit 6 is
the "force mode" enable), but did so via two unrelated code paths:
RTL930x kept the force bit separate from the value in a __set helper,
while RTL931x had it baked into each switch-case constant.
Add a shared rtpcs_93xx_sds_set_ip_mode() that takes the rtpcs_sds_mode
enum, looks up the 5-bit value from the existing sds_hw_mode_vals
table, and writes value | force-bit in one place.
Convert both variants:
- RTL930x: drop __rtpcs_930x_sds_set_ip_mode and the manual table
lookup; __rtpcs_930x_sds_get_ip_mode is replaced by the shared
rtpcs_93xx_sds_get_ip_mode, which reverse-looks the raw register
value up in sds_hw_mode_vals[] and returns the matching enum
rtpcs_sds_mode (or -ENOENT for an unmapped raw value). The
wrapper that orchestrates power, CMU, state machine and rx-reset
around the mode write is renamed to rtpcs_930x_sds_apply_ip_mode
for clarity.
- RTL931x: drop the per-mode switch and the leftover pr_info debug
print; rename the symerr-clear + MAC-OFF + IP-mode-write wrapper
to rtpcs_931x_sds_apply_ip_mode.
rtpcs_930x_sds_reconfigure_to_pll() now goes through the new shared
get/set helpers: it saves the current IP mode as an enum on entry
and restores it via the enum-taking setter after the PLL reconfigure.
This changes behavior by mapping the raw mode setting through the
hardware mode table, effectively blocking unknown modes which might be
set by bootloader or somewhere else. This is intended and might uncover
unknown behavior instead of hiding it.
As a side-effect, QSGMII is now properly set too for RTL931x. Most code
paths anyway already had support for this mode, but it was missing from
the mode setting.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23213
Signed-off-by: Robert Marko <robimarko@gmail.com>
Mikhail Zhilkin
Qingfang Deng
Hauke Mehrtens
Rosen Penev
Zoltan HERPAI
John Audia
Tianling Shen
Til Kaiser
Wei-Ting Yang
Sander Schutten
Florian Maurer
Tomasz Maciej Nowak
Michael Pfeifroth
Markus Stockhausen
Mieczyslaw Nalewaj
Andre Heider
Jonas Jelonek
Christoph Krapp