The wildcard combined an apk_package_files pattern of $(pkg)-*.apk with a
gen_package_wildcard that ends in [^a-z]*, so the full glob required two
dashes. Files for packages without an ABI version (e.g. ubbf-0~....apk)
only contain one dash and never matched, so ipkg-remove was never called
on them and stale .apk files accumulated in the bin directory.
Drop the explicit dash from apk_package_files. The [^a-z] in
gen_package_wildcard already serves as the dash matcher, and
scripts/ipkg-remove filters precisely by reading apk metadata.
Fixes: 642d568b0f ("build: fix ipkg-remove: add support for removing apk files")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Replace exit(1) on every failure path with return null so callers that
iterate over multiple radios can collect results from the radios that
did succeed instead of aborting on the first one that refuses an
off-channel scan.
Route diagnostics to stderr via warn() so stdout stays clean for
callers parsing JSON output, and include the device name in each
message to disambiguate per-radio failures.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
1bf2d490484e libfstools: make get_var_from_file() reusable
0b6022439cad mount_root: add kernel parameter to specify the overlay storage name
e600d842ce81 mount_root: add kernel parameter to specify the overlay fileystem type
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Backport GDM2 loopback fixup for Ethernet driver. This should be the last
patch before introduction of Multi-Serdes support series.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The chunk length is not correct.
Fixes: d2fabb974c ("mediatek: add support for Wavlink WL-WNT100X3 ubootmod")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
The generated firmware patches for RealTek's PHYs are host architecture
agnostic. Express this with PKGARCH:=all.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
When using imagebuilder to create images, ROOTFS_FILESYSTEM may be
defined to create just the desired images, but the '*-rootfs.tar.gz'
and '*-rootfs.cpio.gz' images are being created unconditionally
for many targets.
By making generation of these images conditional on the state of
ROOTFS_FILESYSTEM, we can save significant space (measured 3-7 MB
depending on length of package list) and time.
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Now that the upstream RealTek PHY driver is patched to support also
the new 5G and 10G PHYs we can start to phase-out the messy downstream
driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The functionality/support for 5G and 10G PHYs was extracted from the
realtek-phy driver and ported to the upstream Linux realtek PHY driver.
These PHY chips need a sequence of register writes (and similar operations)
for initialization. These sequences are provided as firmware files which
are interpreted/applied by a new register patch engine.
By switching to the upstream driver, it should be possible to get rid of a
large chunk of (from OpenWrt perspective) unmaintained code from Realtek.
The actual Linux phy-core infrastructure from Linux can be mostly used and
only the Realtek specific quirks need to be handled.
The files which need to be provided are depending on the PHY:
* rtl8261n.bin (package "rtl8261n-firmware" or "rtl8261n-lp-firmware")
- RTL8251L 5Gbps PHY
- RTL8261BE 10Gbps PHY
- RTL8261N 10Gbps PHY
* rtl8264b.bin (package "rtl8264b-firmware")
- RTL8254B 5Gbps PHY
- RTL8264 10Gbps PHY
- RTL8264B 10Gbps PHY
Files which are affected by this change (DEVICE_PACKAGES dependencies,
hwmon paths, default kernel configurations, refresh of patches, ...) are
updated at the same times.
Signed-off-by: Balázs Triszka <info@balika011.hu>
Co-authored-by: Semih Baskan <strst.gs@gmail.com>
Co-authored-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Co-authored-by: Gilly1970 <gilroyscott@hotmail.com>
Co-authored-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Co-authored-by: Carlo Szelinsky <github@szelinsky.de>
[sven: rebase, integrate suggestions from PR, add device packages, split]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
[daniel: stripped to Linux 6.18 only, dropped unrelated changes]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This is required by the realtek PHY driver for:
* rtl8261n.bin (package "rtl8261n-firmware" or "rtl8261n-lp-firmware")
- RTL8251L 5Gbps PHY
- RTL8261BE 10Gbps PHY
- RTL8261N 10Gbps PHY
* rtl8264b.bin (package "rtl8264b-firmware")
- RTL8254B 5Gbps PHY
- RTL8264 10Gbps PHY
- RTL8264B 10Gbps PHY
These PHY chips need a sequence of register writes for initialization.
These are provided as firmware files which are interpreted/applied by a
new register patch engine.
For the moment, the patch instructions in rtl8261-firmware and
rtl8264b-firmware are the same as from the rtl8261n driver. This should
make it possible to first evaluate the patch engine and driver development
for switching over in adjusting the patch instructions.
Signed-off-by: Balázs Triszka <info@balika011.hu>
[sven: rebase, split, fix package version/release, use conf from rtl8261n
driver]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
[daniel: define VERSION matching source date for the resulting packages]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
qemustart is a handy script to quickly test OpenWrt firmware using
qemu. Bringing up networking currently requires a bridge-helper
setup with privileged IP and bridge assignment. To simplify
testing scenarios like the package manager, which need both shell
access and outbound internet, add a user-mode networking option
backed by SLIRP that requires no privileges.
To stay backward compatible, the defaults don't change. The new
flag --user-network attaches two NICs (LAN + WAN) and forwards
three host ports to the guest LAN interface (192.168.1.1):
2222 -> 22 (ssh), 8080 -> 80 (http) and 8443 -> 443 (https). The
host-side ports can be overridden with --ssh-port, --http-port
and --https-port.
Link: https://github.com/openwrt/openwrt/pull/23424
Signed-off-by: Paul Spooren <mail@aparcar.org>
OpenWrt's 99-default_network assigns eth0 to lan and eth1 to wan
when no target-specific 02_network is present, which is the case
for malta. The qemustart bridge block however placed the wan
-device before the lan -device, so the guest's eth0 (lan) ended
up attached to $BR_WAN and eth1 (wan) to $BR_LAN.
Swap the order to match the guest's actual role assignment.
Link: https://github.com/openwrt/openwrt/pull/23424
Signed-off-by: Paul Spooren <mail@aparcar.org>
In the network context there might be confusion between "struct netdev"
and "struct device". The driver should avoid variables of type device
and name "dev" where possible. Remove all variables that point to the
device and use pdev->dev instead. This is like other network drivers
do it.
While we are here modernize logging during probing. Remove messages
from helpers and log errors during probing with dev_err_probe().
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23420
Signed-off-by: Robert Marko <robimarko@gmail.com>
The function init_mac() can produce errors for the RTL931x devices.
When this happens it throws a message but continues. That can
leave the hardware in a wrong state.
Cleanup the error handling. Remove all messages from the function
and simply return an error value. In the probe() consumer evaluate
this error and abort probing if needed. As there were no reported
issues in the past it is ok to drop the detailed messages and
aggregate them in a single one.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23420
Signed-off-by: Robert Marko <robimarko@gmail.com>
Upstream netdev does not like big guards. Especially
around debugging functions. Convert to scoped_guard()
and only lock the really needed code parts. This way
all debugging can run outside of the lock.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23411
Signed-off-by: Robert Marko <robimarko@gmail.com>
Majority of kernel uses a_to_b(a) instead of b_from_a(a).
Convert to that to be consistent with all helpers in the
driver. Additionally drop inline function definitions.
Let the compiler decide what is best.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23411
Signed-off-by: Robert Marko <robimarko@gmail.com>
The led_set node was previously duplicated in the per-device DTS for
-10/-12HP and -12F, even though all three share the same Base-T LED
encoding. Move the shared led_set with the Base-T mapping into the
common DTSI as set 0, and have XS1930-12F append its SFP-port mapping
as led_set1 via a property override. Swap the led-set index on the
-12F ports accordingly so SFP ports use set 1 and the two Base-T
ports use set 0.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23428
Signed-off-by: Robert Marko <robimarko@gmail.com>
The -12HP variant has a dedicated red LED on GPIO 3 that lights up
when the PoE budget is exhausted. Add it as led_poe_max with
function = "poe-usage" so userspace can drive it from the PoE stack.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23428
Signed-off-by: Robert Marko <robimarko@gmail.com>
The cloud and locator LEDs were declared with no function (cloud) or
with the generic LED_FUNCTION_INDICATOR (locator), which doesn't
match what the hardware actually exposes. Use the descriptive
function strings "cloud" and "locator" instead so the LEDs end up
with sensible names in sysfs.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23428
Signed-off-by: Robert Marko <robimarko@gmail.com>
The XS1930-12HP model from Zyxel doesn't actually use the same GPIOs for
the SYS LED. This was assumed first but proved wrong now. Instead, the
green part of the SYS LED is on another GPIO and the red part of the SYS
LED is on GPIO 0 instead of the green part. Adjust that accordingly in
the device tree.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23428
Signed-off-by: Robert Marko <robimarko@gmail.com>
The support addition for those switches defined the restore button as a
button to trigger a restart. However, those switches also have a reset
button which is wired to the SoC's reset line, causing a reset upon
pressing. Thus, using the restore button for basically the same purpose
doesn't make sense. Change the 'linux,code' property to 'BTN_0' to
assign no real function to that button, allowing it to be used for
different purposes.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23428
Signed-off-by: Robert Marko <robimarko@gmail.com>
The switches from Zyxels XS1930 have one or two fans in the case. They
might be controlled in a limited fashion. There's a single GPIO which -
depending on the state - drives the fan in slow or fast mode. Wire that
up as a device tree node to be able to control that in userspace.
XS1930-10 and XS1930-12HP use the same GPIO while XS1930-12F moves that
to one of its GPIO expanders. Also add 'kmod-hwmon-gpiofan' for all
three devices to be selected by default.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23428
Signed-off-by: Robert Marko <robimarko@gmail.com>
XS1930-10 and XS1930-12HP share most of their layout: the same
8-port AQR813 Base-T block, the same SFP+ GPIO mux, identical I2C
master config and serdes polarity. Carve those shared pieces out
into a new intermediate rtl9313_zyxel_xs1930-aqr813.dtsi and have both
device DTS files include it, leaving only their device-specific
differences (LED-set masks, extra PoE bits on -12HP, extra AQR113C
PHYs on -12HP) in the per-device files. XS1930-12F continues to
include the common DTSI directly since its layout differs too much
to share usefully.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23428
Signed-off-by: Robert Marko <robimarko@gmail.com>
The power, cloud and locator LEDs exist on all three XS1930 variants
with the same colors and roles, only the GPIOs differ. Declare them
once in the common DTSI with the -10/-12HP pinout and let -12F
override the gpios properties via phandle references. This removes
three near-identical led-node blocks from the device DTS files.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23428
Signed-off-by: Robert Marko <robimarko@gmail.com>
The driver uses lazy initialization - during first temperature
get. Checking enabled status over and over again does not make
sense. Provide separate setup functions for this. With this split
the error handling will be improved. If initialization fails, the
sensor will not be registered at all.
While we are here fix some minor typos.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/23405
Signed-off-by: Robert Marko <robimarko@gmail.com>
The AddDepends/pse-pd helper appended kmod-pse-pd to DEPENDS without the
'+' prefix, making it a hard dependency rather than an auto-selecting one.
This breaks pulling any PSE controller driver (kmod-pse-pd692x0,
kmod-pse-si3474, kmod-pse-tps23881, kmod-pse-regulator, ...) in via a
device's DEVICE_PACKAGES: the kmod itself is auto-selected, but the
unsatisfied hard dep on kmod-pse-pd silently drops it from .config.
Prefix the kmod-pse-pd entry with '+' so it auto-selects, matching how
the other deps in the same file (kmod-i2c-core, etc.) are expressed. The
helper is the right place to fix this; every PSE controller driver routes
through it.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23449
Signed-off-by: Robert Marko <robimarko@gmail.com>
The gmac1 is not used and doesn't have any mac address configured. The
gmac0 has the nvmem-cells set and can actually be used to retrieve the
correct mac address.
Fixes: c7c54f3134 ("ramips: add support for Plasma Cloud PAX1800-Lite")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://github.com/openwrt/openwrt/pull/23441
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand, which increases ubi size
from 90M to 122.25M.
Flashing instructions:
1. Login into the device and backup all your partitions,
especially `Factory` and 'HW' to be able to come back to stock and use all
Wavlink services.
2. Unlock mtd partitions:
```
apk update && apk add kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
```
3. Upload new `bl2` and `fip` to the router /tmp and write them:
```
mtd write /tmp/openwrt-mediatek-filogic-wavlink_wl-wnt100x3-ubootmod-preloader.bin bl2
mtd write /tmp/openwrt-mediatek-filogic-wavlink_wl-wnt100x3-ubootmod-bl31-uboot.fip fip
mtd erase ubi
```
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt initramfs has booted, prepare ubi and envs:
```
ubidetach -p /dev/mtd4 && ubiformat /dev/mtd4 -y && ubiattach -p /dev/mtd4 && ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB && ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
```
8. Perform sysupgrade.
Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22753
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hardware
--------
- SOC: MediaTek MT7981B
- RAM: 512MB DDR3
- FLASH: 128MB SPI-NAND ESMT F50L1G41LB
- NETWORK: 1 x1000M WAN, 1 x 1000M LAN
- WIFI: MediaTek MT7981B 2x2 DBDC 802.11ax 2T2R (2.4/5)
- LEDs: 1x STATUS (blue)
- USB: 1x USB 3.0 (XHCI)
- FAN: 1x 5V FAN
Installation / Upgrade Procedure
-----------------------------
1.Log in to the web management page.
2.Select the country code and time zone, set the Wi-Fi password, and
click Save.
3.Click "More", navigate to "Developer Options", and enable the SSH
function.
4.Log in to the device via an SSH client (default IP is usually
192.168.20.1).
5.Use scp to upload the OpenWrt
image(openwrt-mediatek-filogic-wavlink_wl-wnt100x3-squashfs-sysupgrade.bin)
to the /tmp directory
6.Perform the flash by running the sysupgrade command (use -n to
overwrite the existing configuration)
7.Wait for the device to reboot automatically. Once finished, access the
OpenWrt web interface (LuCI) at the default IP 192.168.1.1.
MAC Addresses
-----------------------------
2.4GHz: 80:3F:5D:xx:xx:93 (Factory 0x4)
LAN : 80:3F:5D:xx:xx:91 (Factory, 0x3fff4)
WAN : 80:3F:5D:xx:xx:92 (Factory, 0x3fffa)
5GHz : 02:3F:5D:xx:xx:93 (derived from 2.4GHz MAC, LAA))
Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22753
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add support for TP-Link Festa F65, an AX3000 ceiling mount WiFi 6 AP.
Hardware
--------
SOC : MediaTek MT7981B 2x A53
RAM : ESMT M15T4G16256A 512MiB
Flash : ESMT F50L1G41LB 128 MiB
ETH : 1x 1GbE
WiFi : MT7976
Buttons : Reset
Leds : Blue status led on top
Power : DC 12V 1.2A / PoE
Installation
------------
1. Disassemble the device
2. Solder UART to pins VGRT right of the ethernet port
3. Connect UART console (3.3V)
4. Press Ctrl+b to stop in u-boot shell
5. Use `mtkload` to boot `openwrt-initramfs-kernel.bin` via tftp
6. Flash `openwrt-squashfs-sysupgrade.bin` via sysupgrade
Revert to OEM firmware
----------------------
1. Hold reset button while plugging in power
2. Configure host ethernet to 192.168.0.1/24
3. Go to http://192.168.0.254
4. Upload OEM firmware
MAC Addresses
-------------
LAN : DC:62:79:xx:xx:28 (printed on label)
2.4GHz: DC:62:79:xx:xx:28
5GHz : DC:62:79:xx:xx:29
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22138
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
| Component | Details |
|------------------|-------------------------------------------------|
| **SoC** | MediaTek MT7986A (4× ARM Cortex-A53 @ 2.0 GHz) |
| **RAM** | 512 MB |
| **Flash** | 256 MB NAND |
| **Ethernet** | 5× 10/100/1000 Mbps (1 WAN + 4 LAN) |
| **WLAN 2.4 GHz** | MediaTek MT7976GN — 802.11b/g/n/ax, 4×4 MIMO |
| **WLAN 5 GHz** | MediaTek MT7976AN — 802.11n/ac/ax, 4×4 MIMO |
| **LEDs** | 1× RGB LED (GPIO-controlled) |
| **Button** | 1× Reset |
| **USB** | Yes |
**MAC Addresses:**
| Interface | Source |
|------------|-------------------------------------------------|
| WAN/Label | u-boot-env MTD partition, "mac" (text) |
| LAN | WAN + 1 |
| 2.4 GHz | WAN + 2 |
| 5 GHz | WAN + 3 |
---
**1. Prepare TFTP server**
Set a static IP on the ethernet interface of your computer (e.g. default: ip `192.168.1.2`, gateway `192.168.1.1`).
Download the initramfs image and host it with the TFTP server.
**2. Interrupt boot**
Attach UART and power on the router. When the boot menu appears, select **Failsafe Mode**,
then press `Ctrl-C` to interrupt and enter the U-Boot prompt.
**3. Load and run initramfs image**
```sh
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.2
tftpboot 0x46000000 openwrt-mediatek-filogic-jiorouter_ax6000-jidu6101-initramfs-kernel.bin
fdt addr $(fdtcontroladdr)
fdt rm /signature
bootm
```
**4. Flash sysupgrade image**
Place the sysupgrade image in `/tmp`, then run:
```sh
sysupgrade /tmp/openwrt-mediatek-filogic-jiorouter_ax6000-jidu6101-squashfs-sysupgrade.bin
```
Alternatively, use the sysupgrade option in LuCI.
Note:
- The raw MTD u-boot-env partition is only used for MAC address storage, while the active U-Boot environment is stored in the UBI volume.
- These devices ship with secure boot enabled and stock U-Boot only accepts vendor-signed FIT images.
- BL2/FIP cannot be replaced, so the stock signature verification path cannot be disabled directly.
- Setting ipaddr='' forces U-Boot to exit the web failsafe path and continue into autoboot.
- The custom bootcmd loads OpenWrt from the UBI volume and removes the /signature node before bootm, allowing unsigned OpenWrt FIT images to boot.
- Stock U-Boot expects its environment in a UBI volume named u-boot-env, so it is created during initial setup.
Signed-off-by: sh3ikh-faisal <sheikhfaisal713@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22201
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The COMFAST CF-XR186 is a WiFi repeater. The original OEM firmware is a
fork of OpenWrt 21.02.
To replace the OEM firmware with OpenWrt, flash the sysupgrade image
through the firmware upgrade option via the OEM firmware's web UI.
The OEM firmware upgrade page does not provide an option to perform a
factory reset, so after the flash completes and the device reboots,
perform a reset by holding in the WPS/Reset button until the WiFi
LED flashes red.
The led-boot, led-failsafe, led-upgrade, and led-running aliases all
point at the red WLAN GPIO LED.
The green and blue WLAN GPIO LEDs are used to indicate activity on the
2.4GHz and 5GHz radios. 01_leds assigns netdev triggers for those LEDs
to phy0-ap0 and phy1-ap0 respectively; if neither AP interface exists
(e.g. station-only repeater setups), both LEDs stay dark even when WiFi
traffic is flowing.
Specifications:
- SoC: MediaTek MT7981B
- RAM: 256MB
- Flash: SPI NAND
- WiFi: 2.4GHz + 5GHz (AX3000, 4x 3dBi antennas)
- Ethernet: 1x 10/100/1000M
- LEDs: power (not controllable), blue Ethernet, blue/green/red WiFi
- Button: WPS/Reset
- Power: 100-240V AC (wall plug)
- UART: 115200 8N1
MAC Addresses:
- LAN : 40:A5:EF:xx:xx:2D (Factory, 0xe000)
- 2.4GHz: 40:A5:EF:xx:xx:2F (Factory, 0x0004)
- 5GHz : 40:A5:EF:xx:xx:30 (Factory, 0x8000)
Signed-off-by: David Berdik <dgberdik@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22471
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In case OpenWrt is used to build a custom distribution, the default
button handling logic may be undesired.
Add config options to disable default standard button handling code
at build-time.
Signed-off-by: David Bauer <mail@david-bauer.net>
In case OpenWrt is used to build a custom distribution, the default
button handling logic may be undesired.
Add config options to disable default standard button handling code
at build-time.
Signed-off-by: David Bauer <mail@david-bauer.net>
Specificaitons:
- MediaTek MT7621AT SoC
- 256 MB RAM
- 16MB SPI NOR Flash
- 256MB NAND (split in half for firmware fallback)
- 4x 10/100/1000 Mbps Ethernet, with passive PoE support on LAN1
- WLAN : MediaTek dual-band WiFi 5
- 2.4 GHz : b/g/n, MIMO 2x2
- 5 GHz : n/ac, MIMO 2x2
- Quectel EG060K-EA 4G CAT6 modem
- 2.0 USB Type-A HOST port
- 1x Digital input
- 1x Digital output
- 2x SIM slot (can be swapped via GPIO)
GPIO:
- 1 button (Reset)
- 14 LEDs (power, 4x WAN status, Wifi 2G, Wifi 5G, 3G, 4G, 5x RSSI)
- 3 Modem control (power button, reset, sim select)
- 1 Digital input
- 1 Digital output
Installation
------------
Notice: update OEM firmware to 7.19 or later, earlier versions will
fail to flash openwrt factory firmware.
1. Check from which partition the device is currently running from
$ cat /proc/bootconfig/chosen
In case this output reads rutos-b, install a software update from
Teltonika first. After upgrade completion, check this file now reads
rutos-a before continuing.
2. Download the *-squashfs-factory.bin firmware image
3. Flash firmware image via WEB interface
To revert back to OEM firmware:
https://wiki.teltonika-networks.com/view/Bootloader_menu
Mobile connection:
- EG060K-EA:
Execute AT commands:
echo -ne 'AT+QCFG="usbnet",2\r\n' > /dev/ttyUSB2
echo -ne 'AT+CFUN=1,1\r\n' > /dev/ttyUSB2
Use ModemManager to establish mobile connection.
Signed-off-by: Simonas Tamošaitis <simsasss@gmail.com>
Specifications:
- MediaTek MT7621AT SoC
- 256 MB RAM
- 16MB SPI NOR Flash
- 256MB NAND (split in half for firmware fallback)
- 2x 10/100/1000 Mbps Ethernet, with passive PoE support on LAN
- WLAN : MediaTek dual-band WiFi 5
- 2.4 GHz : b/g/n, MIMO 2x2
- 5 GHz : n/ac, MIMO 2x2
- Quectel RG520N-EB 5G R16 modem (RUTM30) or RG500U-EB 5G (RUTM31)
- 1x Digital input
- 1x Digital output
- 2x SIM slot (can be swapped via AT commands)
- eSIM
- TPM
GPIO:
- 1 button (Reset)
- 3 LEDs (power, 2 RGB)
- 3 Modem control (power button, reset, eSIM switch)
- 1 Digital input
- 1 Digital output
- 1 TPM enable
Installation
------------
Notice: update OEM firmware to 7.19 or later, earlier versions will
fail to flash openwrt factory firmware.
1. Check from which partition the device is currently running from
$ cat /proc/bootconfig/chosen
In case this output reads rutos-b, install a software update from
Teltonika first. After upgrade completion, check this file now reads
rutos-a before continuing.
2. Download the *-squashfs-factory.bin firmware image
3. Flash firmware image via WEB interface
To revert back to OEM firmware:
https://wiki.teltonika-networks.com/view/Bootloader_menu
Mobile connection:
- RG520N-EB:
Use "ModemManager" to establish mobile data connection.
- RG500U-EB:
echo -ne 'AT+QNETDEVCTL=1,3,1\r\n' > /dev/ttyUSB2
Create DHCP interface with usb0 device.
Signed-off-by: Simonas Tamošaitis <simsasss@gmail.com>
Specifications:
- MediaTek MT7621AT SoC
- 256 MB RAM
- 16MB SPI NOR Flash
- 256MB NAND (split in half for firmware fallback)
- 5x 10/100/1000 Mbps Ethernet, with passive PoE support on LAN1
- WLAN : MediaTek dual-band WiFi 5
- 2.4 GHz : b/g/n, MIMO 2x2
- 5 GHz : n/ac, MIMO 2x2
- Quectel RG520N-NA 5G R16 modem (RUTM50) or RG500U-EB 5G (RUTM51)
- 2.0 USB Type-A HOST port
- 1x Digital input
- 1x Digital output
- 2x SIM slot (can be swapped via AT commands)
GPIO:
- 1 button (Reset)
- 13 LEDs (power, 4x WAN status, Wifi 2G, Wifi 5G, 3G, 4G, 5G, RSSI
1,2,3)
- 2 Modem control (power button, reset)
- 1 Digital input
- 1 Digital output
Installation
------------
Notice: update OEM firmware to 7.19 or later, earlier versions will
fail to flash openwrt factory firmware.
1. Check from which partition the device is currently running from
$ cat /proc/bootconfig/chosen
In case this output reads rutos-b, install a software update from
Teltonika first. After upgrade completion, check this file now reads
rutos-a before continuing.
2. Download the *-squashfs-factory.bin firmware image
3. Flash firmware image via WEB interface
To revert back to OEM firmware:
https://wiki.teltonika-networks.com/view/Bootloader_menu
Mobile connection:
- RG520N-NA:
Use "ModemManager" to establish mobile data connection.
- RG500U-EB:
echo -ne 'AT+QNETDEVCTL=1,3,1\r\n' > /dev/ttyUSB2
Create DHCP interface with usb0 device.
Signed-off-by: Simonas Tamošaitis <simsasss@gmail.com>
Felix Fietkau
John Crispin
Robert Marko
Christian Marangi
Shiji Yang
Daniel Golle
Eric Fahlgren
Balázs Triszka
Paul Spooren
Markus Stockhausen
Jonas Jelonek
Andy Chiang
Lorenzo Bianconi
David Bauer
Qingfang Deng
Sven Eckelmann
Fil Dunsky
Leonard Anderweit
sh3ikh-faisal
David Berdik
Simonas Tamošaitis
Thomas Weißschuh