The driver is restricted to kernel 6.12 since commit 57ce8f50e6
("rtl8812au-ct: restrict to kernels ≤ 6.18"), which describes it as
obsolete and replaced by rtw88. With all targets switching to kernel
6.18, it can no longer be built at all.
rtw88 supports the same hardware: all RTL8812AU and RTL8821AU USB IDs
of this driver are handled by kmod-rtw88-8812au and kmod-rtw88-8821au.
The only exception, 2357:0115 (TP-Link Archer T4U), is an RTL8812BU
device and is handled by kmod-rtw88-8822bu.
No device profile or package depends on kmod-rtl8812au-ct or the
virtual kmod-rtl8812au-any, so no other changes are needed.
Signed-off-by: Sander van Deijck <sander@vandeijck.com>
Link: https://github.com/openwrt/openwrt/pull/25972
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport the V4L2 generic ISP types and the v4l2-isp helpers that ISP
drivers use for their parameters and statistics buffers: the two v6.19
commits and a rename that followed them, and the four v7.3 commits that
add the extensible statistics buffer, the per-block validation callback
and the statistics helpers.
Add kmod-video-v4l2-isp for the v4l2-isp module.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The kmod definitions live in ath.mk, intel.mk and the other included
.mk files, but the package scan only regenerates the mac80211 metadata
when the Makefile changes. An edit to a DEPENDS or Kconfig line in
ath.mk is then ignored until tmp/ is deleted by hand.
Name the included files in SCAN_DEPS, as linux-firmware does.
Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Julius Bairaktaris <julius@bairaktaris.de>
Link: https://github.com/openwrt/openwrt/pull/25953
Signed-off-by: Robert Marko <robimarko@gmail.com>
The cfg80211 7.2 API conversion changed cfg80211_rtw_get_key() to take
a wireless_dev instead of a net_device, but its DBG_871X() statement
still uses ndev. This breaks compilation with an undeclared identifier:
ioctl_cfg80211.c: error: 'ndev' undeclared (first use in this function)
Derive ndev from wdev before the disabled code block, matching the other
converted callbacks. Bump PKG_RELEASE to rebuild the module.
Fixes: 3c1066f412 ("rtl8812au-ct: fix build with mac80211 7.2")
Signed-off-by: Alexander Zaguzin <st7105@gmail.com>
16c95b04c020 main: tear down the DNS ifb device on exit
d8b47df02cdf interface: fix the socket() error check in qosify_iface_init()
21cc61818226 interface: fix the ifb device name for long interface names
bbb96c522f39 interface: add option for multiqueue cake
39889ba2d94b interface: only use cake_mq on devices with several transmit queues
b2f9e2818d1c interface: create the ifb device with one queue per receive queue
c6983494fe42 qosify-bpf: only override unmarked packets with a fallback value
551491cead1c dns: check the length of address records
f840a74077f3 qosify-bpf: classify IPv4 fragments like their first fragment
90c756581a62 interface: factor out the setup of filter netlink messages
aa3aa6b52c63 interface: redirect DNS replies with one flower filter
ddd72827f252 qosify-bpf: add a macro for timeouts in seconds
b3ee50eff9d9 map: accept port 65535 in port rules
DNS replies are now redirected with flower, add kmod-sched-flower to
the dependencies. Add the multiqueue option to the config.
Link: https://github.com/openwrt/openwrt/pull/25696
Signed-off-by: Nick Hainke <vincent@systemli.org>
Describe fixed split-PHY topology with an optional qcom,split-phy property
on the PCIe radio. Read it only for QCN9274 hw2.0 when the OTP board
identifier is zero or erased, before target capability discovery.
Valid OTP remains authoritative. Devices without the property and other
hardware revisions retain their existing behavior. Leave QMI capability
handling and WMI mode selection unchanged. Do not match router identities
inside ath12k.
Include the proposed binding and driver handling together; board selection
is separate. The binding is an RFC for maintainer review.
Source checks covered OTP field values, absent inputs, per-device isolation,
patch refresh and schema validation. LN6001 startup also exercised the
unset-OTP property path in the attended test.
Signed-off-by: Satoshi Ikeuchi <satosan.ikm@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25595
Signed-off-by: Robert Marko <robimarko@gmail.com>
An unknown direct-buffer module ID currently rejects the whole capability
event. Skip unsupported entries without enabling those features, compact
the retained entries and publish their actual count. Adapt the change to
backports 7.2, retaining empty-result cleanup and malformed-input errors.
Carry only this firmware capability-parser change from OpenWrt PR #23001,
crediting its source and the published review guidance. Keep it separate
from radio-topology selection.
The reduced LN6001 series containing this change passed 5 and 6 GHz radio
registration and AP startup on the physical device.
Link: https://github.com/openwrt/openwrt/pull/23001
Link: https://github.com/openwrt/openwrt/pull/23001#discussion_r3195284635
Signed-off-by: Satoshi Ikeuchi <satosan.ikm@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25595
Signed-off-by: Robert Marko <robimarko@gmail.com>
json-c 0.19 frees a container object in json_object_put() in a call
inside assert(). The package builds with NDEBUG, which compiles that
call out, so every released object or array stays allocated. Each
json() of ucode leaks its result this way: netifd grew to 58 MB and a
test agent to 80 MB within a day, and a 352 MB device ran out of memory.
Add a patch that calls the function before the assertion.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Xunison Exigo Hub D50 5G is a 5G/LTE router with Wi-Fi 6. It is also
sold as the Zearts D50 5G.
Specifications:
SoC: Qualcomm IPQ5018, dual-core Cortex-A53 @ 1.0 GHz
RAM: 512 MiB
Flash: 128 MiB SPI NAND (ESMT F50D1G41LB)
WLAN: IPQ5018 2.4 GHz, QCN9074 5 GHz (PCIe), both 802.11ax
Ethernet: 1x GbE WAN (IPQ5018 internal GE PHY, gmac0)
3x GbE LAN (QCA8337 switch, SGMII to gmac1)
WWAN: Quectel RM500Q-AE, 5G Sub-6 / LTE Cat 16, on USB 2.0 and
PCIe
Buttons: reset, WPS
LEDs: MESH (green/red), 5G (green/red), 4G, WiFi, Internet, WAN;
power is hardwired
Power: 12 V / 2 A DC
Serial: 115200 8N1, 4-pin header JP1 next to SW4 on the main board,
from pin 1: VCC, TX, RX, GND
Notes:
- WAN is gmac0 wired straight to the internal GE PHY, not a switch
port; its netdev is named wan by the label property.
- The console RX line (gpio20) is pulled up. Left floating with nothing
on the header it causes an interrupt storm and, on some units, a hang
at boot.
- USB is 2.0 only: the controller is limited to the HS PHY and clocks
its pipe from UTMI. The 5 V supply for the port and the modem is
switched by gpio24 (active low).
- MACs follow the stock firmware: LAN uses 0:art 0x0, WAN 0:art 0x6.
The label has no MAC printed, so there is no label-mac-device.
- Wi-Fi calibration data and MAC addresses come from 0:art through
nvmem cells on the Wi-Fi nodes (calibration: IPQ5018 at 0x1000,
QCN9074 at 0x26800). The caldata holds the Qualcomm placeholder MAC,
so the radios take the 0:art 0x0 MAC + 2 and + 3 instead.
- Board data for both radios is submitted separately to
firmware_qca-wireless under the calibration variant
Xunison-Exigo-Hub-D50-5G, both taken from the stock firmware:
bdwlan.b24-brax for the IPQ5018 and qcn9000/bdwlan.ba0 for the
QCN9074. The brax file is the vendor's board variant; on my unit it
outperformed the bdwlan.b24 that the stock firmware loads.
- The modem power line (gpio31) has no consumer and is kept high with a
GPIO hog.
- The Internet LED is lit while the modem's wwan0 is up. The WiFi LED
uses the network trigger in link mode, so it is lit while an AP is up
on either radio; the phyNradio triggers never light it with ath11k on
this board. The 4G and 5G LEDs have no trigger, as nothing in the
kernel reports the modem's access technology.
Modem:
The RM500Q-AE is wired to both USB and PCIe, and its data_interface
setting selects which one carries data. The stock firmware leaves it on
PCIe (data_interface 1,0) and this port uses it there, so no AT command
is needed after installing. It is driven by mhi-pci-generic with MBIM:
data on wwan0, control on /dev/wwan0mbim0 and AT commands on
/dev/wwan0at0. No modem interface is preconfigured; add one with the
"mbim" protocol on /dev/wwan0mbim0.
Installation:
The factory image is a raw UBI image for the U-Boot web recovery.
1. Power the router off, hold the reset button and power it on. Keep
holding until the Internet LED stays lit (about 10 seconds).
2. Set a computer on a LAN port to 192.168.1.2/24 and open
http://192.168.1.254
3. Upload openwrt-qualcommax-ipq50xx-xunison_exigo-hub-d50-5g-squashfs-factory.img
and wait for the router to reboot.
Later upgrades use the sysupgrade image.
The port started from George Moussalem's device support in the 4IceG
OpenWrt tree, with the device tree reworked by Lukasz Szczur (LS3434):
USB, the modem supply and the NAND/sysupgrade layout. Thanks to Hostle
for the flashing work on this board and to Rafał Wabik (4IceG) for the
tree it was developed in.
Link: https://forum.openwrt.org/t/adding-support-for-xunison-exigo-d50-5g-zearts-d50-5g-ipq5018/247016
Co-developed-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Co-developed-by: Lukasz Szczur <8sdasfasfas@royaleplaysempire.com>
Signed-off-by: Lukasz Szczur <8sdasfasfas@royaleplaysempire.com>
Co-developed-by: Rafał Wabik <4rafal@gmail.com>
Signed-off-by: Rafał Wabik <4rafal@gmail.com>
Signed-off-by: Steve Meek <stevemeek82@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25890
Signed-off-by: Robert Marko <robimarko@gmail.com>
To reduce code duplication across different AN7583 evaluation boards,
introduce a shared multi-EVB base device tree and utilize Device Tree
Overlays (DTSO) for board-specific configurations.
Signed-off-by: Yalei Zang <yalei.zang@airoha.com>
Link: https://github.com/openwrt/openwrt/pull/24926
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
To reduce code duplication across different AN7581 evaluation boards,
introduce a shared multi-EVB base device tree and utilize Device Tree
Overlays (DTSO) for board-specific configurations.
Signed-off-by: Yalei Zang <yalei.zang@airoha.com>
Link: https://github.com/openwrt/openwrt/pull/24926
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
json-c 0.19 wraps the actual object free in json_object_put() inside an
assert(), so when compiled with NDEBUG (as OpenWrt does) the free is
compiled out and every JSON object/array parsed by users such as
ucode's json() leaks memory (~1.7KB per object).
Apply the upstream fix, moving the free call outside the assert:
json-c/json-c@f291fa81c6
"free objects outside assert() in json_object_put"
Fixes: https://github.com/ucode-lang/ucode/issues/495
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Replace the expanded fixed-partition 128M target with a dedicated
all-in-UBI target and OpenWrt U-Boot. Include bootloader configuration,
image generation and upgrade support together.
Share the fixed-partitions container and read-only 1 MiB BL2 range
in the common DTSI. Declare the remaining partitions and factory NVMEM
data in the variant DTS files. Keep NMBM on the legacy target and preserve
its stock partition map and 64 MiB UBI region.
The new layout uses a 1 MiB bl2 partition followed by a 127 MiB ubi
partition, with factory and fit NVMEM/rootdisk references and redundant
U-Boot environment volumes. Set the UBI variant boot arguments to
`root=/dev/fit0 rootwait` and identify its fit volume as the root disk.
The bootloader supplies memory and console parameters.
Add the U-Boot configuration, default environment and target, recovery
FIT and sysupgrade FIT images, BL2 and BL31/U-Boot artifacts, UBI
environment access and FIT upgrade checks. Recognise the new compatible
in board defaults. Bump the uboot-tools package release for the
new environment configuration support.
The installer creates fip, factory, ubootenv, ubootenv2, recovery and
initial fit volumes. U-Boot and sysupgrade manage the production FIT
and writable rootfs_data. DTS declarations identify volumes consumed
by Linux; they do not themselves create or populate factory data.
MAC address layout
------------------
Factory data is read from the legacy Factory MTD partition or the
factory UBI volume; the offsets within the data are unchanged.
Unit-specific address bytes are xx:xx:xx.
LAN: factory offset 0xe000, mac-base cell index 0.
WAN: factory offset 0xe000, mac-base cell index 1 (LAN MAC + 1).
2.4 GHz: factory offset 0x4, mac-base cell index 0.
5 GHz: factory offset 0x8000, mac-base cell index 0.
Flash instructions
------------------
Conversion requires an installer; the sysupgrade ITB alone cannot
convert the stock partition layout or preserve its factory data.
1. Start from the standard CF-WA933 OpenWrt target with stock MTD
partitions. Back up BL2, u-boot-env, Factory and FIP with mtd dump,
and copy all four files off the device before proceeding:
mtd dump BL2 > /tmp/BL2.bin
mtd dump u-boot-env > /tmp/u-boot-env.bin
mtd dump Factory > /tmp/Factory.bin
mtd dump FIP > /tmp/FIP.bin
2. Obtain the CF-WA933 installer from:
https://github.com/andros-ua/owrt-ubi-installer/releases
Its source and build script are available at:
https://github.com/andros-ua/owrt-ubi-installer/tree/cf-wa933
Connect the PC to a LAN port and use 192.168.1.254/24; the device
is at 192.168.1.1. Copy the resulting image to /tmp and run:
cd /tmp
sysupgrade -n \
openwrt-*-comfast_cf-wa933-ubi-initramfs-recovery-installer.itb
This external installer extracts calibration/MAC data from the old
Factory region before erasing it, creates and populates the static
factory UBI volume, writes BL2 and fip, and creates the redundant
environment, recovery and initial fit volumes. It copies one NAND
eraseblock of factory data; keep the full external Factory backup.
The blue WLAN LED blinks during installation and stays lit for five
seconds before reboot. Run the installer only for initial conversion.
3. Once recovery boots, copy the production image to /tmp and run:
cd /tmp
sysupgrade -n \
openwrt-*-comfast_cf-wa933-ubi-squashfs-sysupgrade.itb
To return to the legacy layout, boot the standard CF-WA933 initramfs
in RAM, restore the saved BL2/u-boot-env/Factory/FIP to their original
MTD partitions (using kmod-mtd-rw when needed), then sysupgrade to the
standard CF-WA933 image. The restored vendor bootloader's recovery
page can install vendor firmware. UART recovery of BL2/FIP is also
available using https://github.com/981213/mtk_uartboot.
Signed-off-by: Andrii Kuiukoff <andros.ua@gmail.com>
Signed-off-by: Guillaume RISCHARD <git@stereo.lu>
Link: https://github.com/openwrt/openwrt/pull/24590
Signed-off-by: Jonas Jelonek <jonas@jonasjelonek.de>
Writing the full image erases partitions the image lacks. Refuse that at
upgrade time unless sysupgrade -p is given, so --force and failsafe
cannot bypass it, and read MBR and GPT tables the same way everywhere.
sysupgrade now exports SAVE_PARTITIONS to the image check and the -p help
text mentions the erase.
Signed-off-by: John Audia <therealgraysky@proton.me>
It writes to "$diskdev" without /dev/, so it creates a file in the
working directory and has never reached the disk.
Signed-off-by: John Audia <therealgraysky@proton.me>
Update from 9e031cf453d8 to fdfea0c9a7b4 with fixes for data integrity,
Windows interoperability and malformed filesystem handling. Enable the
new WOF-compression feature.
Notable changes:
- Support reading WOF-compressed Windows files using the LZX and XPRESS
codecs.
- Fix enabling LZNT1 compression on empty files and improve compressed
write correctness and performance, including all-zero overwrites.
- Support reading and creating native Windows symlinks, with
symlink=native and native_symlink=rel mount options for creation and
path translation.
- Fix fstrim range alignment to avoid discarding allocated clusters, and
fix write offsets on NTFS volumes with 4 KiB sectors.
- Fix synchronous MFT write completion and error propagation, and
prevent volumes with recorded errors from being marked clean by sync.
- Fix deadlocks in metadata writeback, inode eviction and rename, and
serialize truncate and fallocate against mmap faults.
- Fix extended attribute corruption and preserve chmod permissions
across remounts; restrict userspace writes to reserved WSL metadata
attributes.
- Apply Windows filename restrictions only with the windows_names
option.
- Harden validation of boot sectors, attributes, directory indexes and
runlists, fixing out-of-bounds accesses, use-after-free and memory
leaks.
Link: https://github.com/namjaejeon/linux-ntfs/compare/9e031cf453d8...fdfea0c9a7b4
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25228
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Remove filesystem options no longer present in supported kernels:
CONFIG_NFS_USE_NEW_IDMAPPER: removed in linux-3.4
CONFIG_EXT4_ENCRYPTION: removed in linux-5.1
CONFIG_NFSD_FAULT_INJECTION: removed in linux-5.10
CONFIG_AUTOFS4_FS: removed in linux-6.5
CONFIG_BTRFS_FS_CHECK_INTEGRITY: removed in linux-6.7
reiserfs fixes deferred due to pending removal alongside 6.12.
Signed-off-by: Gary Dotzler <geldot@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/20592
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
iface_setup() and hostapd_set_bss_options() write snoop_iface, the
netifd network device, for every BSS. hostapd reads the option only in
x_snoop.c, and hostapd_setup_bss() starts that code only for a BSS with
proxy_arp. When the network of a BSS changes, the value changes, and
hostapd.uc cannot apply snoop_iface to a running BSS: it replaces the
BSS and every station on it loses its association:
bss ap-mld1 changed in snoop_iface, replacing it
Write snoop_iface only where proxy_arp is enabled. A BSS with proxy_arp
is still replaced when its network changes, since the snooping sockets
are bound to that device.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mld_add() keeps the phy devices it opens in phy_list, under the name
of the phy. A caller without a list gets an array from mld_add(), and
an array has no place for a string key.
Make the default an object, like the list that mld_start() passes.
Fixes: 9aca8a97d7 ("wpa_supplicant: add MLO client support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
he_spr_sr_control is the SR Control field, a number (default 3), but
the script declared it boolean. netifd's parse_bool() turns any value
other than 0 or 1 into null, so a configured 2 reached hostapd as the
default 3, with PSR Disallowed set, and bit 4 was lost.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The shell scripts lacked what the ucode scripts gained in "wifi-scripts:
pass the SRG spatial reuse settings to hostapd": the SRG OBSS PD offsets
and the SRG BSS colour and partial BSSID lists, and SR Control bit 2
set by the presence of the non-SRG offset. An offset of 0 left the
field out of the element.
Add he_spr_srg_obss_pd_min_offset, he_spr_srg_obss_pd_max_offset,
he_spr_srg_bss_colors and he_spr_srg_partial_bssid. Either SRG offset
sets bit 3, and the non-SRG offset sets bit 2 whenever it is given.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
device_htmode_append() cleared he_spr_psr_enabled for a PHY without
PSR-based spatial reuse support only after it built he_spr_sr_control.
Where BSS Color is enabled and the configuration gives
he_spr_sr_control with bit 0 clear and he_spr_psr_enabled set, a radio
without PSR then advertised PSR as allowed. The schema default of 3
already has bit 0 set.
Clear it first, then build the bits.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Spatial Reuse Parameter Set takes SRG OBSS PD offsets and the SRG
BSS colour and partial BSSID bitmaps (IEEE Std 802.11-2024 9.4.2.251),
and hostapd reads them as he_spr_srg_obss_pd_min_offset,
he_spr_srg_obss_pd_max_offset, he_spr_srg_bss_colors and
he_spr_srg_partial_bssid. The schema had none of them, so a radio could
not run with SRG information.
Add the four options. Either offset sets SR Control bit 3 (SRG
Information Present). The non-SRG offset now sets bit 2 by its
presence: an offset of 0 is a valid offset, and before it left the
field out of the element.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The Wallys DR5018S is an IPQ5018-based tri-band Wi-Fi 6E board.
Product specification:
https://www.wallystech.com/upload/DR5018S.pdf
Hardware:
- Qualcomm IPQ5018 SoC
- 512 MB DDR3L RAM
- 8 MB SPI NOR flash (Macronix MX25U6435F)
- 128 MB SPI NAND flash (GigaDevice GD5F1GM7REYIG)
- 1 x 1 GbE LAN port using the integrated GEPHY
- 1 x 2.5 GbE WAN port using a QCA8081 PHY
- 2x2 2.4 GHz Wi-Fi 6 using the integrated radio
- 2x2 5 GHz and 2x2 6 GHz Wi-Fi 6E using QCN6122 radios
- 1 x USB 2.0 pin-header interface
- 1 x reset button
- 4 x blue status LEDs
- UART: J3 next to the USB header, 115200 8N1
- pin 1: 3.3 V (do not connect)
- pin 2: TX
- pin 3: RX
- pin 4: GND
- Power: 12-52 V DC jack, or 802.3at/bt and passive 48 V PoE
(the manufacturer does not publish a DC current rating)
The SPI NOR contains the boot chain, U-Boot environment and ART
partitions. The SPI NAND contains the training area and two 62 MiB
rootfs slots.
Add the device tree, FIT/UBI image definitions, network defaults,
calibration extraction, U-Boot environment access and NAND sysupgrade
support.
MAC addresses:
- LAN: stored in ART at offset 0x0 and read through an NVMEM mac-base cell
- WAN: stored in ART at offset 0x6 and read through an NVMEM mac-base cell
- 2.4 GHz: stored in the ART calibration block at offset 0x100e
- 5 GHz: stored in the ART calibration block at offset 0x2680e
- 6 GHz: stored in the ART calibration block at offset 0x4c00e
The three Wi-Fi calibration blocks are extracted from ART and retain
their stored per-radio MAC addresses; they are not derived from the
Ethernet MAC addresses.
The sysupgrade handler removes OEM-only UBI volumes before creating the
OpenWrt kernel, rootfs and rootfs_data volumes.
Installation:
1. Connect to the J3 serial console and interrupt the vendor U-Boot.
Copy the generated initramfs-uImage.itb to the TFTP root as
initramfs.itb, then configure TFTP and boot it:
setenv serverip 192.168.1.10
setenv ipaddr 192.168.1.1
tftpboot 0x44000000 initramfs.itb
bootm 0x44000000
2. Transfer the generated squashfs-sysupgrade.bin to the device as
/tmp/sysupgrade.bin and install it:
sysupgrade -n /tmp/sysupgrade.bin
Reverting to the vendor firmware has not been tested. Back up the
complete SPI NOR and both SPI NAND rootfs slots before installing
OpenWrt.
Dependencies:
- CMN PLL boot fix: https://github.com/openwrt/openwrt/pull/24653
- Internal radio fix: https://github.com/openwrt/openwrt/pull/24909
- Board data: https://github.com/openwrt/firmware_qca-wireless/pull/149
Tested on a Wallys DR5018S with the dependencies above applied:
- initramfs boot from the vendor U-Boot
- installation to SPI NAND and subsequent sysupgrade
- repeated cold boots
- 1 GbE LAN and 2.5 GbE WAN
- 2.4 GHz, 5 GHz and 6 GHz AP interfaces
- USB 2.0 host-controller registration
- four blue status LED outputs
Signed-off-by: Alan Gao <1226010136@qq.com>
Link: https://github.com/openwrt/openwrt/pull/24910
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for Linksys MR2000-family routers based on Qualcomm
IPQ5018, including the MR20WH (LN3111) and MR20EC variants.
Hardware:
- Qualcomm IPQ5018
- 512 MiB RAM
- GigaDevice GD5F2GQ5REYIH 256 MiB SPI-NAND
- QCA8337 switch with four Gigabit LAN ports over SGMII
- dedicated IPQ5018 internal Gigabit Ethernet PHY for WAN
- IPQ5018 2.4 GHz 802.11ax
- QCN6122 5 GHz 802.11ax
- USB host port
- RGB status LED
- reset and WPS buttons
- 12 V / 1.5 A power input
The MR20WH uses the same stock firmware as the MR2000 family, so use
MR2000 as the canonical OpenWrt board identity. The tested hardware
was an MR20WH (LN3111).
The board support was initially derived from the existing MX2000
support, but the MR2000 family differs from the MX2000 in Ethernet
topology, GPIO assignments and NAND partitioning.
UART is available on the four-pin header on the left PCB edge. With
the Ethernet ports facing down, the pins from top to bottom are RX,
TX, GND and +5V. The serial console uses 115200 8N1.
The base MAC address is stored as hw_mac_addr in the devinfo
partition. LAN and WAN use the base address. The 2.4 GHz and 5 GHz
radios use base +1 and base +2 respectively.
Use Qualcomm SMEM partition discovery instead of board-specific
fixed partitions. Retain Linksys dual-bank upgrade handling,
pending further validation of the NAND layout.
The factory image can be installed directly from the stock Linksys
firmware web interface. The factory image now inherits the
MR2000 Linksys image type from the common device recipe.
For recovery and development, initramfs can be loaded from stock
U-Boot using TFTP:
setenv ethact eth1
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.10
tftpboot 0x44000000 <initramfs-image>
bootm 0x44000000
After OpenWrt is installed, use the normal sysupgrade image for
subsequent upgrades.
USB 2.0 hotplug, mass storage and the USB status LED were verified
on hardware. USB 3.0 SuperSpeed was verified at 5000 Mbps using a
RAM-patched device tree with the upstream dual-PHY configuration.
The MR2000-specific IPQ5018 and QCN6122 board files were
extracted from stock Linksys firmware and submitted to
firmware_qca-wireless PR #169. Select the matching MR2000
calibration variants and ipq-wifi package. The firmware source
revision must be updated after the board files are merged.
Add the MR2000 uboot-envtools configuration and register the MR2000-specific ipq-wifi package.
Signed-off-by: Joe Aear <360alaska@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25673
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use RFC 6979 nonces with the staged LibreSSL host tool when
SOURCE_DATE_EPOCH is set. Retry deterministically for full-width
LAN969x signature scalars while preserving random signing otherwise.
Two clean builds produced identical FIP, FWU FIP and FWU HTML outputs.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Use SOURCE_DATE_EPOCH for X.509 validity and hash the unsigned
certificate fields to derive stable serial numbers. The hash includes
payload extensions, so changed firmware gets a new serial.
Retain the existing behavior when the variable is unset and reject
invalid values. ECDSA signatures remain nondeterministic.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Use the published P-256 example key from RFC 6979 for all seven
default development signing roles instead of generating new keys.
Keep role-specific filenames so TFA_KEY_DIR can supply distinct keys.
Pass all supplied keys to both regular and FWU cert_create runs.
Certificate times, serials, and ECDSA signatures still vary.
The public demo key must not be provisioned as a production trust root.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Sander van Deijck
Daniel Golle
Julius Bairaktaris
Alexander Zaguzin
Nick Hainke
Felix Fietkau
Satoshi Ikeuchi
Steve Meek
Robert Marko
Yalei Zang
Jo-Philipp Wich
Andrii Kuiukoff
John Audia
Qingfang Deng
Gary Dotzler
Alan Gao
Joe Aear
Robert Marko
Shiji Yang
Stefan Kalscheuer
Yanase Yuki
Jan Klos
Ryan Leung