When support was added for the RBR40 and RBS40 it was assumed that they
also share the same second 5ghz wifi chip as their bigger siblings.
Turns out that instead of QCA9984 (RBx50, SRx60) these devices use
QCA9886 like the RBx20 devices to.
They also load different boardfiles for the IPQ4019 chip.
This moves the wifi nodes from the orbi.dtsi to each device dts file and
change the RBx40 boardfile variants.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20877
Signed-off-by: Robert Marko <robimarko@gmail.com>
Netgear Orbi devices are split into router and satellite units. Even
though the hardware is mostly the same, the network configuration is
different. Router units have a designated WAN port while satellite units
have all available ports labeled as "Ethernet".
This splits the device trees into both unit types and adjusts the port
labels.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20877
Signed-off-by: Robert Marko <robimarko@gmail.com>
Following up with errors reported in the ASU repo, these bananapi cases
do not match the DT compatible "bpi", sync with dts sources.
Also some profiles were overwriting SUPPORTED_DEVICES.
Sysupgrade would be failing in SUPPORTED_DEVICES check since
the DT compatible(/tmp/sysinfo/board_name) is not in SUPPORTED_DEVICES.
This should also fix errors when using ASU sysupgrade clients.
- Sync profile makefile target names with DT compatibles.
- Fix overwrites of SUPPORTED_DEVICES instead of appending.
- Adapt the uboot-sunxi profiles accordingly.
*bpi-p2-zero dts is still not upstream.
V2:
- Include fixes for arm926ejs(ARM926EJ-S) subtarget (LicheePi Nano and
PopStick v1.1) (profile rename for correct default SUPPORTED_DEVICES)
Fixes: https://forum.openwrt.org/t/luci-attended-sysupgrade-support-thread/230552/246
Fixes: https://github.com/openwrt/asu/issues/486
Fixes: https://github.com/openwrt/asu/issues/524
Fixes: 9aa66b8ce7 "sunxi: add support for Banana Pi M2 Berry"
Fixes: d5f615bf2a "sunxi: add support for Sinovoip Banana Pi M2 Plus"
Fixes: 3819c1638a "sunxi: Add support for Banana Pi M2 Ultra"
Fixes: 6bf8193b25 "sunxi: add support for Bananapi P2 Zero"
Fixes: 80edfaf675 "sunxi: add support for Banana Pi M3"
Fixes: 3c24a1d423 "sunxi: add support for NanoPi NEO Plus2 board"
Fixes: a689307c97 "sunxi: build image/uboot for the NanoPi NEO2"
Fixes: fde68cb809 "sunxi: add support for FriendlyARM NanoPi R1S H5"
Fixes: 3ec468ff4f "sunxi: add F1C100 (arm926ej-s) support"
Signed-off-by: Mario Andrés Pérez <mapb_@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21095
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is a trivial change to allow users to use 'list' on iface.
Old wifi-scripts already implements this, so this just ensures
that shell-based and ucode wifi-scripts are on-par with each other.
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20977
Signed-off-by: Robert Marko <robimarko@gmail.com>
When iface is omitted, wifi-vlan will apply to all interfaces.
However, netifd.set_vlan call is not successful as it assumes
that every wifi-vlan section corresponds to one VIF.
For this reason in the wifi-vlan case (cur_type == "vlan")
we create a composite key in the form `${vif.name}/${vlan.name}`
allowing the same vlan section to correspond to multiple VAPs.
`/` was decided as a delimiter as it is an invalid character
for a network interface name and UCI identifier; so it is
impossible for it to cause conflicts.
It was verified that the `ubus call network.wireless status`
works as expected with this change. Moreover, wifi-station
is not susceptible to this problem.
This also means that it is now possible for wifi-vlan
to support `list` iface similar to old shell-based wifi-scripts.
This will be done in a follow-up commit.
Fixes: 98435a37a7 ("wifi-scripts: iface should be optional in wifi-vlan definition")
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/20977
Signed-off-by: Robert Marko <robimarko@gmail.com>
c6202981872e ipq5018: use correct board for GL-iNet B3000 IPQ5018 radio
ec72376cadf1 qca4019: Add Meraki Underdog
059b7114c77b ipq6018: add tp-link eap620hd v2
Signed-off-by: Robert Marko <robimarko@gmail.com>
cf51aeb93220 odhcpd: fix captive_portal_uri reset
e8b7fdea8d5e dhcpv4: fix DNS server option
b84553e496a3 router: Modify relayed RA PIO P flag according to interface policy
da3e2a9829cc router: Modify relayed RA PIO A flags according to interface policy
bad7138b70f0 README.md: update dhcp ubus events
ca00527e5f...cf51aeb932
Also remove duplicated /usr/share/libubox/jshn.sh include.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This allows an optional tag to be put in the .config file which is
included in the filename of the resulting images, so it's easier to
build images with different functionality for the same target hardware.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Link: https://github.com/openwrt/openwrt/pull/20984
Signed-off-by: Petr Štetiar <ynezz@true.cz>
The previous logic was copied from 12_network-generate-ula, but fails to
account for upgrades where the "auto" value isn't set (it is set by
base-files/files/bin/config_generate). Fix this to always set the
default duid if it isn't set.
Also, rename the file to better reflect what it does.
Closes: #21029
Fixes: a660a076db ("base-files: generate a global DHCP DUID")
Link: https://github.com/openwrt/openwrt/pull/21118
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [fixes,closes tag]
Add the DDR4_4BG_MODE option, which supports 4GB DDR4 RAM
for the MT7987 and 8GB DDR4 RAM for the MT7988. If this mode
is not enabled, bl2 can only recognize half the size of RAM.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/21000
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit adds support for the Watchguard Firebox models
T10-W, T15 and T15-W.
CPU: Freescale P1010
RAM: 512MB (T10) / 1024MB (T15)
Flash: 1MB SPI-NOR, 512MB NAND (T10) / 1024MB NAND (T15)
WiFi: 802.11abgn 2T2R AR9582 based Mini-PCIe card (-W models only)
Ethernet: 3x GBE (via AR8033 PHY)
LEDs: 7x hard-wired (6x LAN, 1x Power)
4x GPIO single-colored (Attn/Status/Mode/Failover)
1x GPIO dual-colored (2.4/5G WiFi, -W models only)
Serial: RJ45, Cisco pinout, 115200/8N1
Other: Battery backed RTC
Atmel TPM 1.2 chip (unsupported)
Based on 35f6d79, which introduced Watchguard Firebox T10 support.
The T10 and T15 are identical hardware, with the exception of the T15
having twice the flash and RAM size.
The T10-W and T15-W models have their Mini-PCIe slot populated with an ath9
(AR9582) based WiFi card. The slot is either unpopulated or empty for
non-WiFi models. All required drivers are present by default on the mpc85xx
target, so T10/T10-W resp. T15/T15-W can use the same OpenWrt image.
This commit also introduces the zImage loader from 7d768a9 to boot the
kernel. This is required, since the U-Boot version used in these devices
appears to have a hard limit of 16MB for the kernel size it can handle. The
current kernel size is around 17MB, though, due to kernel page alignment
required for memory protection.
Installation (replaces previous instructions for T10):
1. If the U-Boot password is known, proceed with step 2.
If the U-Boot password is unknown, dump the NOR flash using a SPI
programmer and patch the unknown password to a known one. You can use
blocktrron's Python script:
https://github.com/blocktrron/t10-uboot-patcher/
This script will patch the password to '1234' (without quotes).
Alternatively, you can search for the hashed password in the NOR dump
yourself and overwrite it with a known one. The SHA1 hash is:
E597301A1D89FF3F6D318DBF4DBA0A5ABC5ECBEA
Write the patched NOR dump back to the device.
2. Connect the device via serial cable, power it on and interrupt
the boot process by pressing Ctrl+C. Enter the U-Boot password to access
the CLI.
3. (Optional) Populate the uboot-env partition by entering:
saveenv
This will allow you to use uboot-envtools from within OpenWrt later,
e.g. to increase the loadable kernel size.
The default loadable kernel size is 5MB, the compressed kernel size at
the time of this commit is 3.1MB.
4. Serve the initramfs OpenWrt image from a TFTP server at 10.0.1.13/24,
connected to eth0 (WAN) of the device. File name must be 'uImage'. Boot
with:
tftpboot; bootm;
Make sure to use the correct image for your device (T10 resp. T15)!
5. After booting, connect to OpenWrt on eth1 (LAN) via SSH. Verify
that the UBI partiton is mtd7, format it and install the sysupgrade
image.
$ cat /proc/mtd
$ ubiformat /dev/mtd7 -y
$ sysupgrade -n <path to sysupgrade.bin>
6. The device should now boot OpenWrt from NAND flash. Enjoy.
Back to stock:
Use the vendor recovery procedure.
Stock recovery might also be necessary in case you have accidentally used
the fw_setenv command from within OpenWrt without using saveenv in U-Boot
first.
In order to use the vendor firmware recovery procedure, the NAND partitions
mtd3 to mtd6 must remain intact. Make sure not to overwrite them, or keep
dumps of them for later recovery.
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16776
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update to latest release.
Add patch `003-Revert-libcap-Add-build-ldflags-to-_makenames-rule.patch`
to fix errors in the form of:
```
/usr/bin/ld.bfd: /external-toolchain/openwrt-toolchain-x86-64_gcc-14.3.0_musl.Linux-x86_64/toolchain-x86_64_gcc-14.3.0_musl/lib/libc.a(__stack_chk_fail.o): relocation R_X86_64_32 against symbol `__stack_chk_guard' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld.bfd: /external-toolchain/openwrt-toolchain-x86-64_gcc-14.3.0_musl.Linux-x86_64/toolchain-x86_64_gcc-14.3.0_musl/lib/libc.a(strerror.o): relocation R_X86_64_32 against `.rodata.errmsgstr' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld.bfd: /external-toolchain/openwrt-toolchain-x86-64_gcc-14.3.0_musl.Linux-x86_64/toolchain-x86_64_gcc-14.3.0_musl/lib/libc.a(realloc.o): relocation R_X86_64_32S against hidden symbol `__malloc_size_classes' can not be used when making a PIE object
/usr/bin/ld.bfd: /external-toolchain/openwrt-toolchain-x86-64_gcc-14.3.0_musl.Linux-x86_64/toolchain-x86_64_gcc-14.3.0_musl/lib/libc.a(__stdout_write.o): relocation R_X86_64_32S against hidden symbol `__stdio_write' can not be used when making a PIE object
/usr/bin/ld.bfd: /external-toolchain/openwrt-toolchain-x86-64_gcc-14.3.0_musl.Linux-x86_64/toolchain-x86_64_gcc-14.3.0_musl/lib/libc.a(ofl.o): relocation R_X86_64_32 against `.bss.ofl_lock' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld.bfd: /external-toolchain/openwrt-toolchain-x86-64_gcc-14.3.0_musl.Linux-x86_64/toolchain-x86_64_gcc-14.3.0_musl/lib/libc.a(stderr.o): warning: relocation against `__stderr_FILE' in read-only section `.rodata.stderr'
/usr/bin/ld.bfd: /usr/lib/gcc/x86_64-linux-gnu/10/../../../x86_64-linux-gnu/Scrt1.o: in function `_start':
(.text+0x12): undefined reference to `__libc_csu_fini'
/usr/bin/ld.bfd: (.text+0x19): undefined reference to `__libc_csu_init'
collect2: error: ld returned 1 exit status
```
Changes: https://git.kernel.org/pub/scm/libs/libcap/libcap.git/diff/?id=v1.2.77&id2=v1.2.69&dt=2
The apk size did not increase much:
Old size for armsr/armv8:
16245 libcap-2.69-r1.apk
new size for armsr/armv8:
16315 libcap-2.77-r1.apk
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://github.com/openwrt/openwrt/pull/20881
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport patch fixing support for GCC15 caused by __counted_by.
This macro was moved to a different header in recent kernel version and
caused wrong detection on the #ifndef condition.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
CONFIG_ARCH_STRICT_ALIGN=y (default in config-6.12) causes BPF programs
(XDP, TC, tracing, etc.) to fail verification with misaligned packet
and memory access errors, breaking essential kernel functionality.
Hardware support status:
- Supported (modern CPUs): 2K2000, 2K3000, 3A5000, 3A6000, 3C5000,
3C6000, 3D5000
- Unsupported (legacy): 2K500, 2K1000
The current default prioritizes legacy compatibility over:
1. BPF program functionality across multiple subsystems
2. Performance on widely deployed modern hardware
3. Modern kernel features relying on unaligned accesses
Since BPF programs require unaligned access capabilities and most
LoongArch deployments use modern CPUs with hardware support, disable
CONFIG_ARCH_STRICT_ALIGN. Legacy system users can manually enable
it if needed.
Link: https://github.com/vincentmli/BPFire/issues/69
Reference: https://elixir.bootlin.com/linux/v6.12/source/arch/loongarch/Kconfig#L534
Signed-off-by: Vincent Li <vincent.mc.li@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21121
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Downloading packages from git requires zstd to compress their tarballs.
Make sure that zstd from host tools is compiled when running make
download. Otherwise, either the download would fail because zstd is not
present or a random version from the host would be used leading to hash
mismatches.
Signed-off-by: Andreas Gnau <andreas.gnau@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/21125
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
ca00527e5fc3 statefiles: don't write empty hosts files
24b70c5c2ff0 Revert "statefiles: fix escape sequence for broken hostname output"
5203ad13954c statefiles: fix stale pio handling for !ubus
a64760b30f67 odhcpd: rename piofolder to piodir
6779344a8c8a statefiles: use tmpfile functions for pio files
9f8abcc662d0 statefiles: rename prefix information functions
cb65b83e524e config: move pio json handling to statefiles.c
5b01849cc42c statefiles: add a dirfd helper function
eadde3d7dd74 statefiles: add tmp helper functions
c29aa7091498 statefiles: fix escape sequence for broken hostname output
00f2d7a4dbe5 dhcpv4: don't send zero IPv6-only preferred option
c86d29bb83d6 Revert "dhcpv6-ia: add some noise to the T1 and T2 periods"
b062769ab85f Revert "do not delegate ULA prefixes"
fd4714bb2dfe do not delegate ULA prefixes
81ea5bfef775 dhcpv6-ia: add some noise to the T1 and T2 periods
79252ed0c0...ca00527e5f
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
On the smartrg sr505n the bootloader only sets registers to enable the
PHYs if it's interrupted. When Linux boots this results in a -EINVAL
error when trying to read from the EPHYs and the GPHY doesn't work.
This patch disables low power mode in the GPHY/EPHYs and properly resets
the EPHYs.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17648
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
