On 25.12.0 the device has not enough free blocks to initialize overlay.
Move the device to tiny target and consume backup with storage
partitions, which were previously unused. This operation will reclaim
~800 KiB of flash memory. OEM used storage partition for configuration,
while backup was used to store copy of U-Boot environment and copy of
calibration data.
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit 15342a05bd)
Partially revert 5e3a602def. Unfortunately the ethaddr value in U-Boot
environment is enclosed in double quotes which makes it longer than
ETH_ALEN, thus nvmem returns EINVAL. Switch back to handling the MAC
addresses in user space.
Fixes: 5e3a602def ("ath79: sitecom,wlrx100: use nvmem")
Reviewed-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit a7f5fb4381)
Restore the lost band label.
Fixes: 502ac21e8f ("ipq40xx: drop redundant label with new LED color/function format")
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
(cherry picked from commit 873120b4ff)
Currently, moving from a port on one LAN8814 PHY package to another results
in a no traffic flowing on that new port.
It was tracked down to upstream change that fixed the issue that QSGMII
was soft reset on .config_init of each of 4 PHY-s in the package resulting
in a temporary traffic loss until QSGMII resynced.
However, it seems that the QSGMII soft reset timing is crucial and doing
the reset during probe only cause the QSGMII link to become partially
unsynced (Like 2 or 3 lanes are not synced).
So, add an upstream patch[1] to fix this, patch was modified as we
dont have the inband caps currently.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/drivers/net/phy/micrel.c?h=next-20260508&id=e027c218c482c6a0ae1948129ccda3b0a2033368
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
(cherry picked from commit eb6dd61a8d)
Link: https://github.com/openwrt/openwrt/pull/22625
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
(cherry picked from commit cfc17e81e1)
Link: https://github.com/openwrt/openwrt/pull/22625
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
(cherry picked from commit b7b4938303)
Link: https://github.com/openwrt/openwrt/pull/22625
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
(cherry picked from commit 6b3b7c7dc1)
Link: https://github.com/openwrt/openwrt/pull/22625
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch adds support for the MikroTik RouterBOARD 960PGS (hEX
PoE/PowerBox Pro) router. The device has a USB 2.0 port and an SFP port for
adding optical fiber connectivity. The ports 2-5 can power other PoE
capable devices with the same voltage as applied to the unit.
Specifications:
- SoC: Qualcomm Atheros QCA9557
- Flash: 16 MB (SPI)
- RAM: 128 MB
- 1x Ethernet SFP: 1000
- 1x Ethernet RJ45: 10/100/1000 port with passive POE in
- 4x Ethernet RJ45: 10/100/1000 ports with 802.3af/at PoE out
- 1x USB 2.0 host port
- 1x reset button
See [1] and [2] for more details.
Flashing:
TFTP boot initramfs image and then perform sysupgrade. Follow common
MikroTik procedure as in https://openwrt.org/toh/mikrotik/common.
Link: https://mikrotik.com/product/RB960PGS [1]
Link: https://mikrotik.com/product/RB960PGS-PB [2]
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
(cherry picked from commit 078fab3397)
Unset the SWCONFIG symbol and AR8216_PHY which selects SWCONFIG. Add
kmod-switch-ar8xxx, which enables AR8216_PHY, to DEFAULT_PACKAGES for the
subtarget. With this, swconfig driver will be now compiled as a module, as
kmod-switch-ar8xxx selects kmod-swconfig.
Refresh the config-default file for ath79/mikrotik while at it.
This change makes it possible to disable the swconfig driver for MikroTik
RouterBOARD 960PGS (hEX PoE/PowerBox Pro).
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
(cherry picked from commit 9091c9f8cb)
rebuilding x86 did fail in an existing build directory
mkdir fails if the folder exists already
Signed-off-by: Sander Schutten <schutten@hotmail.com>
Signed-off-by: Florian Maurer <fmaurer@disroot.org>
(cherry picked from commit 472c325fb8)
The ucode migration wrote "basic_rate" into the wpa_supplicant network
block, but that is not a valid wpa_supplicant network field, causing:
Line 15: unknown network field 'basic_rate'.
failed to parse network block.
Map UCI basic_rate to the correct wpa_supplicant fields, matching the
behavior of the legacy shell script (hostapd.sh):
- mesh mode: mesh_basic_rates (space-separated, 100 kb/s units)
- sta/adhoc: rates (comma-separated Mbps)
Link: https://github.com/openwrt/openwrt/commit/a854d833eabdbc3b42065927c136d75b981a1021
Signed-off-by: Florian Maurer <f.maurer@outlook.de>
[fix commit message link]
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 8810ecd5ed)
Debian changelog:
* Update Mozilla certificate authority bundle to version 2.82
The following certificate authorities were added (+):
+ TrustAsia TLS ECC Root CA
+ TrustAsia TLS RSA Root CA
+ SwissSign RSA TLS Root CA 2022 - 1
+ OISTE Server Root ECC G1
+ OISTE Server Root RSA G1
The following certificate authorities were removed (-):
- GlobalSign Root CA
- Entrust.net Premium 2048 Secure Server CA
- Baltimore CyberTrust Root (closes: #1121936)
- Comodo AAA Services root
- XRamp Global CA Root
- Go Daddy Class 2 CA
- Starfield Class 2 CA
- CommScope Public Trust ECC Root-01
- CommScope Public Trust ECC Root-02
- CommScope Public Trust RSA Root-01
- CommScope Public Trust RSA Root-02
* Use dh_usrlocal to create /usr/local/share/ca-certificates
(closes: #1127100)
Signed-off-by: Fengyu Wu <saldry@proton.me>
Link: https://github.com/openwrt/openwrt/pull/23155
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 403c52db37)
Specification:
The device is similar to the M30 but has only one LAN port and no WAN port.
- MT7981 CPU using 2.4GHz and 5GHz WiFi (both AX)
- 512MB RAM
- 128MB NAND flash with two UBI partitions with identical size
- 1 multi color LED (red, green, blue, white) connected via GCA230718
- 2 buttons (WPS, reset, LED)
- 1 1Gbit LAN port
Disassembly:
- There are two screws at the power connector which must be removed. Afterwards the top case can be removed (it is clipped on, so some tools are required).
Serial Interface:
- The serial interface can be connected to the 4 pin holes on the board. Do NOT connect VCC.
- The pins are labelled on the PCB (RX, TX, GND)
- Settings: 115200, 8N1
MAC addresses:
- LAN MAC is stored in partition "Odm" at offset 0x8f
- WLAN MAC (2.4 GHz and 5GHz) is LAN MAC + 1
Reverting back to OEM firmware:
- There is currently no easy way to revert back to the OEM image
- The methods from M30 and M60 doesn't seem to work anymore
- If you plan to revert back to OEM firmware later, do the following steps before flashing OpenWrt:
- Boot from initramfs as described in "Flashing via U-Boot" but don't flash anything
- Instead, make a backup of UBI and UBI1 partition
- The created dumps must be written to the initial partitions to revert back to OEM
Flashing via Recovery Web Interface:
- Set your IP address to 192.168.200.10, subnetmask 255.255.255.0
- Press the reset button while powering on the device
- Keep the reset button pressed until the LED blinks red
- Open a Chromium based and goto http://192.168.200.50/ (recovery web interface)
- Download openwrt-mediatek-filogic-dlink_aquila-pro-ai-e30-a1-squashfs-recovery.bin
- Note: The recovery web interface always reports successful flashing, even if it fails
- After flashing, the recovery web interface will try to forward the browser to 192.168.0.1 (can be ignored)
- If flashing was successful, OpenWrt is accessible via 192.168.1.1
- The recovery image boots an initramfs image, flash the sys upgrade image to get to „normal“ OpenWrt mode
Flashing via U-Boot:
- Open the case, connect to the UART console
- Set your IP address to 192.168.200.2, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router
- Run a tftp server which provides openwrt-mediatek-filogic-dlink_aquila-pro-ai-e30-a1-initramfs-kernel.bin
- Supply the board with 12V
- Select "7. Load image" in the U-Boot menu
- Enter image file, tftp server IP and device IP (if they differ from the default).
- TFTP download to RAM will start. After a few seconds OpenWrt initramfs should start
- The initramfs is accessible via 192.168.1.1, change your IP address accordingly (or use multiple IP addresses on your interface)
- Perform a sysupgrade using openwrt-mediatek-filogic-dlink_aquila-pro-ai-e30-a1-squashfs-sysupgrade.bin
- Reboot the device. OpenWrt should start from flash now
Flashing via OEM web interface is not possible, as it will change the active partition and OpenWrt is only running on the first UBI partition.
Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22776
(cherry picked from commit 145bc7e52f)
Link: https://github.com/openwrt/openwrt/pull/22958
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Device support for zbt-z8103ax-d
Model D DTS is identical to Model C zbt-z8103ax-c.
Both models share same motherboard.
Difference between models is
- Model C is a cylinder shape enclosure
containing internal antennas.
- Model D is a sandwich shape enclosure
with 6 external antennas.
Specifications:
SoC: MediaTek MT7981B
RAM: 256MiB
Flash: Winbond SPI-NAND 128 MiB
Switch: 1 WAN, 3 LAN (Gigabit) MediaTek MT7531
Buttons: Reset, Mesh
Power: DC 12V 1A
WiFi: MT7981B 2.4Ghz & 5.8Ghz
Led Layout from left to right:
Power
Mesh (RGB Led, user controllable, default set to OpenWrt Status)
WLAN 2.4G (user controllable)
WAN (user controllable)
LAN3
LAN2
LAN1
WLAN 5G (user controllable)
Installation:
A. Through U-Boot menu:
- Prepare your connecting computer to use static IP
(legacy notation) 192.168.1.10 netmask 255.255.255.0
(CIDR notation) 192.168.1.10/24
- Power down the router and hold in the Reset button.
- While holding in the button power up the router again.
- Hold the button in for 10 seconds and then release.
- Use your browser to go to 192.168.1.1
- If you see a GUI allowing for flashing firmware you are at the right spot.
- Upload the **Factory** image file.
Note: U-Boot GUI it can be used to recover from an incorrect firmware flash.
B. Through OpenWrt Dashboard:
If your router comes with OpenWrt preinstalled (modified by the seller),
you can easily upgrade by going to the dashboard (192.168.1.1)
and then navigate to
System -> Backup/Flash firmware, then flash the firmware
MAC Addresses:
MAC Addresses were found in Factory partition:
offset 0x4 F8:5E:3C:xx:xx:aa --> Router Label -2
offset 0xa F8:5E:3C:xx:xx:bb --> Router Label -1
offset 0x24 F8:5E:3C:xx:xx:cc --> Router Label +1
offset 0x2a F8:5E:3C:xx:xx:yy --> printed on Router Label
Signed-off-by: Jörg Seitz <github.joeterminal@xoxy.net>
Link: https://github.com/openwrt/openwrt/pull/21626
(cherry picked from commit 8b4e81b478284d335c5fd4688a611bb7c55ec1b7)
Link: https://github.com/openwrt/openwrt/pull/23180
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Device support for zbt-z8106ax-t
Vendor Zbtlink advertizes this device as model Z8106AX-M2-T
on their website www.zbtlink.com. Device label sticked on
enclosure however states this is model Z8106AX version -T.
I made firmware selector to show this device as
- ZBT-Z8106AX-T to match information printed on the label and
- ZBT-Z8106AX-M2-T to match information found on vendors web pages.
Specifications:
SoC: MediaTek MT7981B
RAM: 256MiB
Flash: Winbond SPI-NAND 128 MiB
Switch: 1 WAN, 4 LAN (Gigabit) MediaTek MT7531
Buttons: Reset
Power: DC 12V-32V 1A
WiFi: MT7981B 2.4Ghz & 5Ghz
USB 3
M2 slot to hold LTE modem
2x nano SIM slots (user controllable)
Router comes in a flat metal box with all antennas detachable.
- 4 antennas for LTE 4G/5G communication
- 2 antennas for Wifi 2.4 GHz
- 2 antennas for Wifi 5 GHz
Power supply could be between 12V and 32V.
This serves both cars equipped with 12V batteries
and trucks equipped with 24V batteries.
Led Layout:
Power (green, user controllable, default set to OpenWrt Status)
Mobile (green, user controllable)
WLAN 2.4G (green, user controllable)
WLAN 5G (green, user controllable)
WAN (amber, user controllable, set to show eth1)
LAN1 (amber, hardware controlled)
LAN2 (amber, hardware controlled)
LAN3 (amber, hardware controlled)
LAN4 (amber, hardware controlled)
SIM Slots:
Controlled via exported GPIO named SIM.
echo "0" > /sys/class/gpio/sim/value
- selects upper sim slot labelled SIM1
echo "1" > /sys/class/gpio/sim/value
- selects lower sim slot labelled SIM2
Slot SIM2 is set as default and matches label on Router enclosure
---
Installation:
A. Through U-Boot menu:
- Prepare your connecting computer to use a static IP in
network 192.168.1.0/24 like
a) 192.168.1.10 netmask 255.255.255.0 (legacy notation)
b) 192.168.1.10/24 (CIDR notation)
- Power down the router and hold in the Reset button.
- While holding in the button power up the router again.
- Hold the button in for 10 seconds and then release.
- Use your browser to go to 192.168.1.1
- If you see a GUI allowing for flashing firmware then you got the right spot.
- Upload the **Factory** image file.
Note: U-Boot GUI it can be used to recover from an incorrect firmware flash.
B. Through OpenWrt Dashboard:
If your router comes with OpenWrt preinstalled (modified by vendor),
you can easily upgrade by going to the dashboard (192.168.1.1) and
then navigate to "System" -> "Backup/Flash firmware"
Flash OpenWRT firmware and take care to deselect (untick) option
"keep settings". Settings done by vendor are incompatible with
versions 24.10 or 25.12.
MAC Addresses:
MAC Addresses were found in Factory partition:
offset 0x4 F8:5E:3C:xx:xx:aa --> Router Label -2
offset 0xa F8:5E:3C:xx:xx:bb --> Router Label -1
offset 0x24 F8:5E:3C:xx:xx:cc --> Router Label +1
offset 0x2a F8:5E:3C:xx:xx:yy --> printed on Router Label
Hardware Watchdog:
Device features a GPIO controlled hardware watchdog.
Verfied by removing procd controlled watchdog and
seeing device rebooting.
---
Notes:
The zbt-z8106ax-t could be ordered from vendor with a variety of modems.
Mine came with a Quectel RM520N-GL. Quectel firmware was at RM520NGLAAR01A07M4G.
This level of firmware made some trouble connecting with some of my
SIM cardproviders.
Newer firmware level RM520NGLAAR01A08M4G_01.205.01.205 was available searching
github repositories. Upgrading my RM520-GL allowed to get successful connects
that did fail with older Quectel firmware.
Modem communication is set to ethernet control mode (ECM) by vendor.
Vendor takes advantage of ECM by wiring modem to internal switch port WWAN.
OpenWRT network configuration wants to define two network interfaces
- Network interface covering USB0 set with high metric
- Network interface covering WWAN set with low metric
Network interface covering WWAN would be preferred default route.
Please take note that internal switch port wired to LTE modem is named LAN5
in vendor provided firmwares. OpenWRT however names port as WWAN to better
describe purpose of port. WWAN is suggested to be assigned to firewall zone WAN.
Did use package qmodem from github repository FUjR/QModem to manage RM520N-GL LTE modem.
Signed-off-by: Jörg Seitz <github.joeterminal@xoxy.net>
Link: https://github.com/openwrt/openwrt/pull/21834
(cherry picked from commit edf0d80c28239121a1020dc1ae4304f8c8b75a04)
Link: https://github.com/openwrt/openwrt/pull/23045
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
EDUP EP-RT2983 comes with a factory installed version of OpenWrt 23.05
with device name "netis,n6".
Specification
--------------
- SoC : MediaTek MT7621AT, MIPS, 880 MHz
- RAM : 256 MiB
- Flash : NAND 128 MiB (Toshiba)
- WLAN : MT7905DAN + MT7975DN
- 2.4 GHz : b/g/n/ax, 574 Mbps, MIMO 2x2
- 5 GHz : a/n/ac/ax, 1201 Mbps, MIMO 2x2
- Ethernet : 10/100/1000 Mbps x4 (1x WAN, 3x LAN)
- UART : 3.3V, 115200n8
- Buttons : 1x Reset
1x WPS
- LEDs : 1x Power (green)
1x WiFi (green)
1x Mesh/WPS (green); flashing green during boot
3x LAN (green)
1x WAN (green); flashing red during upgrade and failsafe
- Power : 12 VDC 1A
Installation
-------------
1. Log in to LuCI
2. Go to System, Backup / Flash Firmware
3. If desired, backup the current system by saving (all) the mtdblock
contents.
4. Flash new firmware image, select Flash image.
5. Browse and select the sysupgrade file
"openwrt-*-ramips-mt7621-edup_ep-rt2983-squashfs-sysupgrade.bin"
and then Upload.
6. Unselect "Keep settings and retain the current configuration"
Note: All settings will be reset to default. WiFi is not enabled by
default so a connection via Ethernet is necessary to log in and set up.
7. Allow "Force upgrade" (tick the box if there is one), or press Continue
if there is no box to tick. This is because the name is now
"edup,ep-rt2983" as it should have been from the start.
8. Proceed to flash. Wait for reboot and keep power connected.
9. After reboot, default address to access LuCI is 192.168.1.1 with
no password
Recovery (UART)
----------------
1. Remove the 4 screws on the bottom and pry open the cover.
2. Connect serial adapter to the unpopulated serial header pins
TX, RX, GND near the WPS button. Do not connect VCC.
3. Start serial terminal (e.g. minicom, screen, etc) on the computer and
turn on the router.
4. As prompted, hit any key to stop autoboot.
5. Enter 2 to select "2. Upgrade firmware"
6. Enter 0 to select "0 - TFTP client (Default)"
7. Accept the defaults by pressing Enter for
"Input U-Boot's IP address: 192.168.1.1",
"TFTP server's IP address: 192.168.1.2",
"Input IP netmask: 255.255.255.0"
8. Assign your PC's Ethernet port a static IP 192.168.1.2 with netmask
255.255.255.0 and connect to a LAN port on the router using the
Ethernet cable. Disconnect all other network connections (e.g. WiFi) on
the computer.
9. Serve the factory image
"openwrt-*-ramips-mt7621-edup_ep-rt2983-squashfs-factory.bin" using
a TFTP server, e.g. tftpd64. For convenience, the filename can be renamed
to something shorter.
10. In the serial terminal, when prompted "Input file name:", enter the
filename from the previous step and press Enter.
11. The factory image will be flashed as indicated. Wait for reboot.
MAC addresses prototype
------------------------
+---------+---------------------+
| | MAC example |
+---------+---------------------+
| LAN | CC:D8:1F:47:xx:yy |
| WAN | CC:D8:1F:47:xx:yy+1 |
| WLAN 2G | CC:D8:1F:17:xx:yy+2 |
| WLAN 5G | CC:D8:1F:77:xx:yy+2 |
+---------+---------------------+
Signed-off-by: Ryan Leung <untilscour@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/22197
(cherry picked from commit 6a8f9fa54d)
Link: https://github.com/openwrt/openwrt/pull/22906
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Stop overriding CCACHE_COMPILERCHECK from rules.mk and rely on
ccache's default, which hashes the compiler binary's mtime and
size.
For a local tree that is enough: the toolchain only changes when
it is rebuilt, and a rebuild updates mtime and size. Users who
want a stricter check can still set CCACHE_COMPILERCHECK in their
environment.
CI does not depend on this export either. The workflow writes a
secondary ccache.conf with
compiler_check=string:<toolchain-commit-sha>
so the cache key is tied to the toolchain source revision. That
is both stricter than the previous "%compiler% -v -c" setting
and portable across runners, where compiler mtimes would not
match after restoring a cache archive.
Link: https://github.com/openwrt/openwrt/pull/22995
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 3956287514)
The sama5d4_xplained_nandflash target incorrectly references microchip_sama5d3-xplained as its BUILD_DEVICES value.
This appears to be a copy-paste error, as all other SAMA5D4 Xplained targets (e.g. mmc and spiflash) correctly use microchip_sama5d4-xplained. The target name itself also clearly refers to the SAMA5D4 platform.
In addition, the SAMA5D3 Xplained and SAMA5D4 Xplained boards use different NAND flash hardware and configurations, so pointing the nandflash target to a SAMA5D3 device is incorrect and may lead to invalid builds or runtime issues.
Fix the inconsistency by updating BUILD_DEVICES to microchip_sama5d4-xplained, aligning the nandflash target with the rest of the SAMA5D4 definitions and ensuring the correct device mapping.
Signed-off-by: Cerrone Diamant <cerrone@tutamail.com>
Link: https://github.com/openwrt/openwrt/pull/23022
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 39f528e440)
It seems that upstream one of the patch had a compilation erro caused by
merging net and net-next and it was fixed silently in a merge commit.
Fix this error in the affected patch.
Fixes: 155c610962 ("airoha: backport additional patch for memory leak and multi-serdes rework")
(cherry picked from commit 3187113c8a)
Link: https://github.com/openwrt/openwrt/pull/23046
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport minor fixup merged upstream for Ethernet driver on Offload
Scenario. This is to continue the effort of keeping the Airoha Ethernet
driver synced with the upstream version.
(cherry picked from commit 2f52b8f724)
Link: https://github.com/openwrt/openwrt/pull/23046
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Hauke Mehrtens
Tomasz Maciej Nowak
Hannu Nyman
John Audia
Robert Marko
Mikhail Zhilkin
Dmitry Mostovoy
Oskari Lemmela
Chester A. Unal
Sander Schutten
Florian Maurer
Magnus Kroken
Rosen Penev
Fengyu Wu
xiao bo
Roland Reinl
Jörg Seitz
Ryan Leung
Sander van Deijck
Ignat Loskutov
Fil Dunsky
Christoph Krapp
Rany Hany
Cerrone Diamant
Christian Marangi