Add support for AVM FRITZ!Box 4050, an IPQ5018 based WiFi 6 router.
Hardware
--------
SOC : Qualcomm IPQ5018 2x A53
RAM : 512MiB DDR3L Winbond W634GU6QB-11
Flash : 128MiB Winbond W25N01GWZEIG
ETH : 4x GbE
Switch : Qualcomm QCA8337
WiFi : IPQ5018, QCN6102
USB : 1x USB 2.0
Buttons : WLAN, DECT, WPS
LEDs : Power, WLAN, DECT, WPS, Info green, Info red
DECT : DCX81AC0CFAE3FNC
Power : DC 12V 1.5A
UART
----
4 holes, vcc is square
gnd - rx - tx - vcc
3.3v
Installation
------------
1. Download scripts/flashing/eva_ramboot.py, initramfs image and sysupgrade.bin
2. Connect to lan1 and set host ip to 192.168.178.2
3. Power the device and run
`./eva_ramboot.py --ramsize 0x20000000 --ramstart 0x40000000 192.168.178.1 <initramfs image>`
when only the 'Power' led blinks
4. Set host ip to 192.168.1.2 and connect to LuCi on 192.168.1.1
5. Sysupgrade in LuCi
Revert to OEM firmware
----------------------
Follow the OEM guide: https://fritz.com/en/pages/recover
The recovery process also works on Linux using Wine.
MAC Addresses
-------------
WAN : D4:24:DD:XX:XX:FF
LAN : D4:24:DD:XX:XX:02 (label mac)
2.4GHz : D4:24:DD:XX:XX:04
5GHz : D4:24:DD:XX:XX:05
Not Supported
-------------
DECT
analog phone port
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25056
Signed-off-by: Robert Marko <robimarko@gmail.com>
Leonard Anderweit
8dcdd8fa0e