Robert Senderek
1c8c05ca98
----- Hardware: CPU: ARMADA 380 1x1332Mhz RAM: 512MB DDR3 FLASH: 256MB MX30LF2G18AC 2x SATA III 2x USB3.0 1x USB2.0 i2c to control various states. RTC with battery 1Gbit LAN (WoL capable) 9x LED RESET button at back Power button at front (gpio-poweroff) Copy button at front ----- Doesn't work FAN control buzzer ----- UART connections Connect UART to port J3 115200 +----+----+----+----+----+ |3.3V| TX | RX | | GND| +----+----+----+ +----+ Depend of UART adapter board can fail to boot when adapter is attached. (all leds are dimmed) . In that case disconnect UART for an < second and after that all leds should be white. Stop u-boot by ctrl-c within 3s window. (bootdelay 7s or more helps) setenv bootdelay 7 saveenv ----- Instalation via UART Boot initramfs-kernel.bin setenv ethact egiga0 setenv serverip 192.168.1.11 setenv ipaddr 192.168.1.12 tftpboot 0x02000000 *initramfs-kernel.bin bootm 0x02000000 - Device is DHCP client by default ( as the other supported NAS) do backup into safe space /dev/mtd3 Kernel-1 /dev/mtd4 RootFS-1 use sysupgrade in console or via luci ----- MAC addresses mac stored in u-boot-env ethaddr label mac = eth0 mac = 5c:6a:80:xx:xx:xx ----- Setting up u-boot dual boot u-boot contain two banks contain two OEM copies To boot OpenWrt from bank1 setenv next_bootfrom 1 saveenv To boot OEM from bank2 setenv next_bootfrom 2 saveenv ----- Configuration via i2c install i2c-tools Enable WoL i2cset -y 0x0 0xa 0xa 0x0006 w Disable WoL i2cset -y 0x0 0xa 0xa 0x0306 w Enable auto power on i2cset -y 0x0 0x0a 0x0a 0x0107 w Disable auto power on i2cset -y 0x0 0x0a 0x0a 0x0007 w Signed-off-by: Robert Senderek <robert.senderek@10g.pl> Link: https://github.com/openwrt/openwrt/pull/23228 Signed-off-by: Robert Marko <robimarko@gmail.com>
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.8+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0