Felix Fietkau
87623c1e67
bss_macaddr_next() gives the address of an MLD to its link on radio 0, and the address generation relies on that. Two paths keep an old link address instead, even after the MLD address changed: - Step 2 of iface_reload_config() keeps the old BSSID of the first BSS when the new one is a default address, because the first BSS cannot change it in place. - The keep loop in iface_restart() gives a surviving BSS with a default address its previous BSSID again. The link then keeps its old address, and the MLD address is on no link. In one case, a config change gave ap-mld0 a new MLD address and reloaded it in place. Link 0 kept the previous MLD address as its link address, so the new MLD address was on no link. From then on, about 30 % of the unicast frames to the associated backhaul station were lost (68 of 100 echo requests arrived), while the AP counted no failed transmission. A new association did not clear it; a full wifi down/up did. Move the decision of bss_macaddr_next() into bss_mld_addr(). The keep loop of iface_restart() skips a link whose previous address is not the MLD address, so the link gets the MLD address. Step 2 takes the restart path in the same case. A link that already has the MLD address stays in place, and plain BSSes, links on other radios and static addresses keep the old behaviour. Signed-off-by: Felix Fietkau <nbd@nbd.name>
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.8+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0