Carlo Szelinsky
aba2818b7c
The Hasivo S1300WP-8XGT-4S+ is a 12-port managed switch based on the
Realtek RTL9313 (RTL931x) SoC.
Tested on hardware revision v1.02 (manufactured 2026-04).
Specifications:
- SoC: Realtek RTL9313
- RAM: 512 MB
- Flash: 32 MB SPI-NOR
- Ethernet: 8x 10GBASE-T (2x RTL8264 quad PHYs), 4x SFP+ (10G)
- Button: 1x reset
- LEDs: 1x system (green) + per-port link/activity via the SoC LED engine
- RTC: NXP PCF8563
- Management MCU (I2C 0x6F): watchdog, CPU/system temperature and fan
control (hwmon)
- UART: 38400 8N1 on the internal header
Working: switching on all copper and SFP+ ports, per-port and system
LEDs, reset button, RTC, watchdog, temperature/fan monitoring.
Not supported: PoE (the PD69x0x PSE controllers are on the PCB but not
driven), front-panel USB host.
Installation:
Netboot the initramfs image over TFTP, then run sysupgrade from OpenWrt.
Connect to the serial console (38400 8N1) and interrupt the U-Boot
autoboot to reach the prompt (press Ctrl+C, then z, then h), then boot
the initramfs image from a TFTP server:
RTL9310# setenv boardmodel RTL9313_12XGE
RTL9310# rtk network on
RTL9310# rtk 10g 55 fiber1g
RTL9310# tftpboot 0x84f00000 openwrt-...-initramfs-kernel.bin
RTL9310# bootm 0x84f00000
Port 55 is front-panel port 12. Use fiber1g for a 1G SFP, fiber10g for
SFP+, and dac50cm for an SFP/RJ45 module. Once OpenWrt has booted, copy
the sysupgrade image over and flash it with sysupgrade.
MAC addresses:
The base MAC comes from the U-Boot environment variable "ethaddr" in
the u-boot-env partition (stock BDINFO). These units ship unprovisioned
(ethaddr = 00:E0:4C:00:00:00); in that case a random MAC is generated
and persisted. Per-port LAN MACs are derived sequentially.
eth0 / label u-boot-env "ethaddr" (random fallback when unset)
lan1 .. lan12 base MAC + sequential offset
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Link: https://github.com/openwrt/openwrt/pull/23775
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.8+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0