Gennaro Cimmino
ba30581a6a
otto_l3_930x_route_lookup_hw() polled the execute bit of the CAM lookup until it cleared, with no limit, so an engine that never answered would hold the FIB work, and rtnl with it, for good. Poll it with readx_poll_timeout(), with the 20 us step and 10 ms limit the table accessors use, and return -ETIMEDOUT when the limit runs out. The only caller, otto_l3_route_remove(), asks for the lookup when a prefix route is not at the row it was written to. After a timeout the route may still hold a row that the block, counted from the routes left, no longer includes, so the next placement would shift rows over a live route. Report the timeout and declare the prefix rows stale, as a failed row move does: what is in the table keeps working and can still be removed, and no route is placed again until the driver is reloaded. Tested on a Hasivo S1100W-8XGT-SE (RTL9303) with a bench-only debugfs switch. Sending every prefix route removal through the lookup, three routes went, each found by it, with no row left. Making the poll wait for a condition that never comes, the removal logged the timeout and left the row, and a prefix route added next got no row; no splat. The bench rounds on trap rows and on source-specific IPv6 routes pass 46 of 46 and 20 of 20. Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Gennaro Cimmino <gcimmino@rayonra.net> Link: https://github.com/openwrt/openwrt/pull/25639 Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.8+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0