Support configuring major version series as host-only (i.e. no target
packages) to reduce strain on buildbots in release branches. The goal is to
have one major target series and multiple host-only ones. E.g. 25.12 uses
1.26 as the default host/target series and 1.27 and beyond as host-only for
packages that require these.
Signed-off-by: George Sapkin <george@sapk.in>
Add a common backend for running librespeed-cli measurements on a router.
The package provides a locked measurement runner, live progress state, and
an rpcd ucode plugin exposing start/stop/status/result/history/config over
ubus. Scheduled measurements are managed through cron and can run within a
configurable time window. Optional daily aggregation keeps longer-term
history compact.
Raw measurements are kept in JSONL for a configurable retention period.
When persistent archive storage is configured, completed days are reduced
to daily min/avg/max values.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Two fixes to the maintenance and search timers, both of which cost a
node contacts it should have had.
Neighbourhood maintenance for both address families was gated on a
single flag that either family's bucket maintenance could set. Bucket
maintenance only confirms nodes that are already known, while
neighbourhood maintenance is what grows the table, so a family whose
nodes never answer held back table growth for the other family too. A
node with no route for one family still holds addresses of that family,
because they arrive in the replies of the other, so this reaches any
single-stack node on a dual-stack build. Each family is now gated on
its own bucket maintenance, and the number of queries per round is
unchanged.
A search step scheduled for exactly its due second returned without
sending anything, because the comparison required the second to have
passed rather than arrived. The early return left the step time alone,
so the search then waited another full interval having sent nothing.
Reset PKG_RELEASE, since the source version changed.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Gandi has deprecated Api Key for authentication and replaced it with
Personal Access Tokens. This adds a v2 gandi package containing a script
using the new authentication scheme while keeping the old version intact
for any existing API Key users. Additionally, it documents the old
version as deprecated and points users to v2.
Signed-off-by: Keith T. Garner <kgarner@kgarner.com>
libjuice's vendored picohash guards the final byte-order swap in
_picohash_sha1_final with SHA_BIG_ENDIAN, which nothing defines, while
endianness is detected into _PICOHASH_BIG_ENDIAN. On big-endian targets
the swap runs when it must not and every SHA-1 digest is emitted with each
32-bit word reversed, taking HMAC-SHA1 with it.
libjuice uses HMAC-SHA1 for STUN MESSAGE-INTEGRITY, so on mips, mips64,
powerpc and every other big-endian target each ICE connectivity check is
rejected as failing integrity. No candidate pair is nominated and no
session can be established. picohash is the default backend, as USE_NETTLE
is off, so this affects the package as built here.
Verified on lantiq/xrx200 (mips_24kc, MIPS 34Kc): before the patch an ICE
agent loops with "STUN integrity check failed" and never leaves the
connecting state; after it the agent reaches completed and a session comes
up over the DHT and ICE. RFC 2202 HMAC-SHA1 test case 1 and the SHA-1
vector for "abc" both fail before and pass after.
Submitted upstream as paullouisageneau/libjuice#353 and, for the vendored
copy's origin, kazuho/picohash#13.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
conmon learns a container's exit status by waiting for the pid it reads from
the runtime's --container-pidfile, which only works while the container is
conmon's own child. With ujail the container belongs to procd, so conmon has
nothing to wait for: it probes the pid with kill(pid, 0), finds it gone and
settles for a status of zero, as its own comment admits. podman then reports
0 for a container that exited 42, and an exec session that succeeded looks
like a failure.
Add a patch letting the runtime supply what conmon cannot observe: ujail
writes the status to an exit_status file beside the pid file, and conmon
adopts it in the one place it would otherwise guess. A runtime whose
container conmon does reap is unaffected, since no such file exists there.
020-fall-back-to-runtime-exit-status-file.patch also picks up two
fixes review caught: the fallback to a status of 0 now waits up to a
tenth of a second in 10ms steps for the runtime to finish writing the
file, since the runtime can only write it after the kernel has
already reaped the container and made the pid stop answering conmon's
probe, so either order is possible; and a status file is only trusted
if it is at least as new as the pid file, so a stale one left by an
earlier container in the same directory is ignored. Its header also
lost the `diff --git`/`index` lines and `git format-patch` version
trailer that don't survive `make package/conmon/refresh`, which is
what CI's "Dirty patches detected" check was catching on every
architecture. Verified via a scratch quilt tree against the pristine
2.2.1 source that the refreshed patch applies cleanly and stays
stable under a second refresh, and that the patched ctr_exit.c and
ctr_stdio.c both syntax-check clean against host glib.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
LVM2 2.03.42:
- add --lockopt retries=N / removeretry=SECONDS to lvmlockd
- use lockd_lv lock probes for pvmove holder availability in shared VGs
- auto-revert metadata when initial pvmove mirror activation fails
- refuse activation of a pvmove-locked LV when pvmove runs on another
node; allow pvmove --abort without args when using lvmlockd
- add cluster lock lifecycle for pvmove LV in shared VGs, and support
for pvmove in a shared VG
- allow lvremove -f to remove pvmove-locked LVs after an interrupted
pvmove; handle active pvmove during vgchange -an with force flags
- fix pvmove completion to use suspend+resume for DM table reload; fix
deactivation cascade during active pvmove
- support inactive LVs in pvmove with metadata-only mirror insertion;
kill orphaned polling process on pvmove --abort
- support formatting vdo volumes with the kernel vdo target (>=9.2);
fix VDO index_memory_size_mb quantisation and report the minimum
required pool size
- add --enable-asan/--enable-tsan build options
device-mapper 1.02.216:
- make libdm thread safe
- add use_kernel_format to dm_vdo_target_params
- introduce libdevmapper-san with --enable-asan/--enable-tsan
- parent table force reload when child device table changes
Refreshed 002-const-stdio.patch and 003-no-mallinfo.patch against the
new upstream source (make package/lvm2/refresh; hunk offsets only, no
content change) and gave both a proper git-am header block (From/Date/
Subject/Signed-off-by), crediting their original authorship (Daniel
Golle, 2015) with an accurate subject/body; they previously had none,
which the CI formality bot flagged. The header block was drafted via
git format-patch against a scratch commit of the pristine source, then
the whole patch re-refreshed through quilt so the diff body matches
what make package/lvm2/refresh actually produces byte for byte -
format-patch output alone does not survive OpenWrt's own refresh
(diff --git/index lines and full @@ context get stripped, the
trailing signature dropped), which is what the CI patch-format check
was rejecting before this.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
If you have questions about what is expected of a pull request, and there is
no specific documentation for your case, or the comments from a reviewer seem
at odds with the documentation you have found, it can be useful to refer to the
prompts given to the automated LLM reviewer. Therefore add those pointers to the
CONTRIBUTING.md document
Signed-off-by: Daniel F. Dickinson <dfdpublic@wildtechgarden.ca>
After switching ACME to being run through procd, individual ACME
instances are now executed in parallel instead of sequentially. This
causes acme.sh to become confused in certain cases. Petr reported that
certificate files ended up with the wrong contents after updating to
OpenWrt 25.12.
Fix this by wrapping the acme.sh execution in a global `flock` keyed on
a file in the state directory. The procd instances will still run in
parallel, but they'll all serialise on the same lock, so only one
acme.sh instance will run at a time.
Fixes: 76b676e4eb ("acme.sh: move to procd to ensure logging gets to syslog")
Reported-by: Petr Novák <petrn@me.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Adds support for setuptools 84.
chardet-normalizer has been broken since setuptools 84 was merged in
6211fee354
Signed-off-by: Austin Lane <vidplace7@gmail.com>
This allows to save some bytes, while preserving the scripts's
copyright and license information.
In owut at current ref db17536ec5cbcc6a76a51e65f3d192b6a2184abb
the reduction in the size applied to the source code is (e.g. without
the computed "s/%%VERSION%%/$(PKG_VERSION)-r$(PKG_RELEASE)/"):
from:
74330 /usr/bin/owut
10541 /usr/share/ucode/utils/argparse.uc
to:
58640 /usr/bin/owut
8630 /usr/share/ucode/utils/argparse.uc
Signed-off-by: Samuele Longhi <agave@dracaena.it>
Co-authored-by: Eric Fahlgren <ericfahlgren@gmail.com>
uneighbord synchronizes hostapd 802.11k Neighbor Reports between local
`hostapd.*` BSSes and other OpenWrt access points on the same LAN, over
IPv6 link-local UDP multicast. Reports are only shared between BSSes with
the same SSID, and installed through hostapd's ubus API.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Update bsbf-resources to the GIT HEAD of 2026-08-29.
- files/usr/sbin/bsbf-bonding:
- Adjust to new xray configuration.
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
The generic package version check invokes ksmbd.tools directly, but the
multicall binary rejects that basename and fails the test.
Check the version through ksmbd.mountd and skip subpackages without
versioned executables.
Signed-off-by: Andrea Pesaresi <andreapesaresi82@gmail.com>
Upstream history:
https://github.com/dangowrt/comrade/compare/v0.1.1...v0.1.16
Also adds comrade-tests, a separate package carrying comrade's compiled
test suite (its unit tests, comrade-e2e, and its end-to-end scenario
scripts) so none of it reaches an end-user comrade install. CI's own
test.sh wires up the unit tests through comrade-tests' own
run-unit-tests.sh; both discover what to run from what was actually
installed rather than a hardcoded list, so neither goes stale as
upstream's own suite grows. stream_cc_test and natstream_test are
skipped there instead of run: the first asserts a throughput floor
QEMU user-mode emulation can't reliably clear, the second does real
ICE/NAT gathering, so run-unit-tests.sh skips both by default;
COMRADE_SKIP= run-unit-tests.sh runs them too, e.g. on real hardware,
and comrade-tests' own description now says so. The variable is
namespaced rather than a plain SKIP, matching COMRADE_E2E_NET below,
so it can't collide with whatever else a CI harness's environment
happens to define. run-unit-tests.sh also warns if a listed test ever
matches no installed binary, so a rename or removal upstream surfaces
as a message instead of silent drift. Each test runs under busybox
timeout with a 600 second bound, 5x upstream's largest CTest TIMEOUT
of 120 seconds with margin left for the slowest emulated targets, so
a test that wedges under QEMU fails in minutes and by name rather
than holding the job to its six-hour limit. The end-to-end scenarios
need real network or multicast conditions, and some a live DHT, that
CI's QEMU emulation cannot promise, so they ship for manual use on
real hardware instead.
PKG_SOURCE_URL now points at the release's own tarball instead of
GitHub's codeload archive: codeload's compression is not guaranteed
byte-stable release to release, which broke a hash pinned against
v0.1.12 within hours of that release going out, while a release asset
is frozen the moment the tag's release is published. The tarball is
still produced with `git archive`, so it still carries no submodule
content and deps/always-online-stun still arrives empty for
Build/Prepare to fill.
The STUN list pin matches this release's own deps/always-online-stun
commit. comrade tries every server in the pool in rotation now, not
just the first entry, but a pool with many dead entries still degrades
public-IPv4 discovery, so this still wants refreshing on every bump.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
On big-endian hosts the server parsed every tcpip-forward bind port as
zero and bound an ephemeral port, so -R remote forwarding never carried
a connection. With no usable entropy source the library crashed inside
mbedtls instead of failing cleanly.
Patches 2-4 were sent upstream to the libssh mailing list:
https://archive.libssh.org/libssh/2026-08/0000000.htmlhttps://archive.libssh.org/libssh/2026-08/0000001.html
Patch 1 backports the seed-failure error path they depend on from
upstream master commit ac4b723c.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
CARTO now requires an API key for the raster basemaps at basemaps.cartocdn.com and watermarks every unauthenticated tile request, so the GeoIP map currently renders "API KEY REQUIRED" across the whole viewport.
Therefore in luci-app-banip the basemap is now drawn from country outlines that ship with the package: Natural Earth 1:110m, public domain, all attributes stripped, simplified to 36 kB (~10 kB in the apk).
readme changes in the base package only
Signed-off-by: Dirk Brenken <dev@brenken.org>
New features:
- automatic gain control / output limiter on the final rendering stage
- signed 32-bit and 24-bit linear PCM support; WASAPI driver now allows
24-bit audio
- MIDI RPN 5 (Modulation Depth Range) support
- multiple reverb engines, addressing prior FDN reverb limitations
- GM2 bank select mode
Musically breaking changes:
- corrected a 17-year-old bug affecting sample fine-tuning in certain
Soundfont instruments
- implemented MIDI RP-020 to fix MTS playback in MIDI files
- switched default reverb engine to Dattorro (plate-style)
- replaced 7th order sinc interpolation with a higher-order one due to
quality concerns
Other: hardened Pipewire driver against xruns; exits with an error when
unable to load a command-line Soundfont; dropped the GLib and
libInstPatch dependencies.
Dropped +glib2 from DEPENDS to match: libfluidsynth.so.3.6.0 no longer
links libglib-2.0 (confirmed via readelf -d).
2.6.0 also drops the enable-libinstpatch CMake option entirely, so the
existing -Denable-libinstpatch=off pin became a silent no-op: DLS/GIG
loading is now controlled by the new enable-native-dls option instead,
which defaults to on. Left unpinned, this bump would have silently
re-enabled DLS/GIG support that this Makefile had deliberately turned
off. Replaced the dead pin with -Denable-native-dls=off to preserve
the existing behaviour explicitly.
Also pin the new enable-signalsmith option (limiter/AGC and the extra
reverb engines) to off: it defaults to on, but the feature it gates
depends on the signalsmith-audio-basics git submodule, which is not
present in the release tarball this package builds from - configure
silently compiles it out either way, so pinning it off just makes that
explicit and deterministic rather than accidental.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
- added a meson.build alongside the existing Makefile, giving more
control for implementing additional features such as optional symbol
versioning (#81, #77)
- added optional versioned symbols when compiling via meson, opt out
with -Dsymbol-versioning=disabled (#82, fixes#77)
This package still builds via the traditional Makefile (no meson.mk
included), which upstream keeps alongside the new meson.build; SONAME
is unchanged (libudev.so.1).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Changelog:
- Upgraded various dependencies, including golang.org/x/crypto to resolve the usual
CVEs in it (but as usual, not actually affecting fscrypt's use of it).
- When selecting password hashing parameters, fscrypt now takes cgroup limitations
into consideration.
- fscrypt encrypt no longer follows trailing symlinks when writing the recovery
instructions.
- fscrypt unlock no longer enters an infinite loop when an incorrect key file is
specified using --key=FILE, --quiet isn't specified, and standard input is a terminal.
- fscrypt unlock no longer enters an infinite loop when an incorrect password is specified,
--quiet isn't specified, and standard input isn't a terminal.
- The error message when multiple protectors are available now mentions --unlock-with in
addition to --protector.
- Documented the udev dependency for /dev/disk/by-uuid/ links.
Signed-off-by: John Audia <therealgraysky@proton.me>
CARTO now requires an API key for the raster basemaps at basemaps.cartocdn.com and watermarks every unauthenticated tile request, so the GeoIP map currently renders "API KEY REQUIRED" across the whole viewport.
Therefore in luci-app-banip the basemap is now drawn from country outlines that ship with the package: Natural Earth 1:110m, public domain, all attributes stripped, simplified to 36 kB (~10 kB in the apk).
readme changes in the base package only
Signed-off-by: Dirk Brenken <dev@brenken.org>
- fixed crash loops as the shipped example policy is disabled
- fixed restart/reload glitches with already stopped services
- bumped version to 0.1.5-r2
Signed-off-by: Dirk Brenken <dev@brenken.org>
Co-authored-by: Claude <noreply@anthropic.com>
Signed-off-by: Dirk Brenken <dev@brenken.org>
It seems these softwares are no longer maintained,
because the latest upstream commit is 7 years ago.
I think Wi-Fi 7 MLO provides similar feature.
This commit drops macremapper, libdcwproto, libdcwsocket,
dcstad, mrmctl and dcwapd.
Signed-off-by: Yanase Yuki <dev@zpc.st>
Update sqm-scripts to the 1.8.0 release.
This release replaces the iptables-based marking rules with native
nftables rules. Replace the iptables dependencies with nftables to match.
Signed-off-by: Dharmik Parmar <dharmikparmar2004@yahoo.com>
shunt is a policy-based routing daemon for OpenWrt. Policies select
traffic by client address or MAC, destination address, domain, port and
protocol, and route it into any netifd interface or device via fwmark
and per-policy routing tables in nftables/fw4.
Domains are covered by a passive DNS observer (AF_PACKET + BPF) that
works with any resolver - dnsmasq, unbound, AGH, a remote DoH client -
because it reads answers on the LAN bridges instead of integrating with
a specific DNS backend. An optional poller pre-warms configured names.
Learned addresses are written in adaptive batches to stay usable beside
packages that keep very large nft sets (e.g. banIP).
Written in ucode, no dependencies beyond ucode modules, nft and ip.
Companion LuCI app is submitted separately to openwrt/luci.
Signed-off-by: Dirk Brenken <dev@brenken.org>
Co-authored-by: Claude <noreply@anthropic.com>
Signed-off-by: Dirk Brenken <dev@brenken.org>
The generic per-executable version probe and the old test.sh both invoke
tcpreplay --version. Under the QEMU test runtime tcpreplay and
tcpreplay-edit abort at startup on the interface link probe
("eth0: SIOCETHTOOL(ETHTOOL_GLINK) ioctl failed: Not a tty") before
autoopts can print the version, which fails the tcpreplay-all test and
warns on the standalone tcpreplay/tcpreplay-edit packages.
Add a test-version.sh that disables the flaky generic probe and asserts
each tool's version without needing an interface, and rewrite test.sh to
exercise the file-processing core (tcpcapinfo dissect, tcprewrite edit,
tcpprep cache) on a small synthesized capture instead of shelling out to
--version, which the CI infrastructure already covers.
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Andy Chiang
Sergei S.
George Sapkin
Josef Schlehofer
Tianling Shen
Daniel Golle
Sven Eckelmann
Keith T. Garner
Daniel F. Dickinson
Toke Høiland-Jørgensen
Ray Wang
Eric Fahlgren
Austin Lane
Samuele LonghiandEric Fahlgren
Nick Hainke
John Audia
Chester A. Unal
Andrea Pesaresi
Ivan Pavlov
Peter Polonec
Dirk Brenken
Yanase Yuki
Dharmik Parmar
Chris Swan
Alexandru Ardelean