Since the MAC lookup started returning -EPROBE_DEFER, a probe that
defers while its nvmem provider (e.g. a mac-base cell in the CFE
partition) isn't ready yet leaves the power domain devices attached
by genpd_dev_pm_attach_by_id() behind. The next probe then fails to
re-create them:
sysfs: cannot create duplicate filename '/devices/genpd:0:1000d800.ethernet'
bcm6368-enetsw 1000d800.ethernet: error getting pm 0
bcm6368-enetsw 1000d800.ethernet: probe with driver bcm6368-enetsw failed with error -22
leaving the board without ethernet and the DSA switch deferred forever.
Look up the MAC first, before anything that isn't device-managed has
been set up, so a deferred probe can simply be retried.
Seen on a BCM6328 (BeWAN A2100N) with kernel 6.18.
Fixes: ed545519ee ("bmips: enet: handle EPROBE_DEFER for the MAC address")
Signed-off-by: Max Plekh <mplekh@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25454
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 81919eb7e4)
Link: https://github.com/openwrt/openwrt/pull/25624
Signed-off-by: Robert Marko <robimarko@gmail.com>
Build/elx-header and Build/znet-header convert a hex string into \xHH
escape sequences using `fold -s2`. This relies on the obsolete -WIDTH
option syntax of GNU fold, which parses "-s2" as "-s -2". uutils
coreutils does not support this syntax and fails with:
error: unexpected argument '-2' found
tip: to pass '-2' as a value, use '-- -2'
Since fold writes nothing to stdout in this case, the command
substitution expands to an empty string. The following
`dd bs=N count=1 conv=sync` then writes zero bytes, because conv=sync
only pads partial input blocks and never pads empty input. The header
field is dropped entirely, and all subsequent fields move to lower
offsets.
The build still succeeds, because the failure happens inside the
subshell which is then handed to echo.
The malformed images are only rejected when a device tries to
boot them.
For example, on the Zyxel WSM20, the missing payload size field in the
znet-header moves the 0x12345678 magic and the payload to unexpected
offsets. The bootloader then rejects the image, even though sysupgrade
accepted it.
This affects all builds on Ubuntu 25.10 and later, because these
releases use uutils coreutils by default.
Replace `fold -s2` with `fold -w2`, which is the documented way to set
the line width and produces identical output with GNU fold.
Affected devices:
- Build/znet-header is used in all images of the Zyxel WSM20 and the
ELECOM WRC-X1800GS
- Build/elx-header is used in the factory images of the ELECOM
WAB-I1750-PS, WAB-S1167-PS, WAB-S600-PS, WRC-2533GHBK-I and
WRC-2533GHBK2-T, the I-O DATA WN-AC1167GR, WN-AC733GR3 and WNPR2600G,
the Edimax RA21S and RG21S, and the D-Link DAP-X1860 A1
Signed-off-by: Grische <github@grische.xyz>
Assisted-by: Claude:claude-opus-5
Link: https://github.com/openwrt/openwrt/pull/25410
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 195c2ce324)
These two image profiles overwrite DEVICE_NAME making the two image
profiles appear with the same name "ventana" in the "profiles.json"
mixing ramdomly the two profiles.
Use BOARD_NAME instead to keep the two profiles names unique (orginal
DEVICE_NAME) hence generating a coherent "profiles.json".
Since there are image recipes hardconding DEVICE_NAME, change them to use
BOARD_NAME if defined, in order to preserve the previous names used in
those recipes.
Fixes: cbc8bcfbaa ("imx6: image: use vendor_model scheme")
Reported-by: Eric Fahlgren <ericfahlgren@gmail.com>
Signed-off-by: Mario Andrés Pérez <mapb_@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22994
(cherry picked from commit 0d21956ecd)
Link: https://github.com/openwrt/openwrt/pull/25443
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Is a security patch release. The most severe CVE fixed
in this release is High.
This release incorporates the following bug fixes and mitigations:
* Fixed DTLS retransmissions of handshake messages from a stale buffer offset.
([CVE-2026-84782])
* Fixed excessive memory allocation in relative CRLDP processing.
([CVE-2026-35189])
* Fixed QUIC unvalidated amplification credit may be over-accounted.
([CVE-2026-35191])
* Fixed potential CPU DoS via O(n^2) fragment reassembly in QUIC.
([CVE-2026-42772])
* Fixed a timing side-channel in scalar multiplication for mon-NIST EC curves.
([CVE-2026-54872])
* Fixed QUIC `STREAM` fragment metadata DoS.
([CVE-2026-54873])
* Fixed non-constant-time SM2 scalar multiplication on ARM64 and RISC-V.
([CVE-2026-54875])
* Fixed out-of-bounds access after `SSL_set_SSL_CTX()` during a handshake.
([CVE-2026-72897])
* Fixed QUIC connection-level flow control was not enforced for streams.
([CVE-2026-75804])
* Fixed a NULL pointer dereference in CMP client revocation response handling.
([CVE-2026-75805])
* Fixed an unauthenticated and undersized DTLS 1.2 AEAD record causing DoS.
([CVE-2026-75806])
* Fixed a timing side-channel in SM2 signature generation.
([CVE-2026-77696])
* Fixed an unbounded `RETIRE_CONNECTION_ID` backlog in QUIC stack
implementation.
([CVE-2026-84784])
* Fixed a bug where `EVP_DecryptFinal()` incorrectly reported a stale success
on AES-SIV authentication failure.
Signed-off-by: Ivan Pavlov <AuthorReflex@gmail.com>
(cherry picked from commit 5edcc1c43c)
Link: https://github.com/openwrt/openwrt/pull/25558
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Passing target flags through EXTRA_CFLAGS leaks them into kernel
module builds on Linux 6.6 and 6.12, causing ARM hard-float ABI
mismatches in generated module objects. Linux 6.18 also forwards
these flags to host tools, where the host compiler rejects them.
Reuse SAN_CFLAGS, normally used for sanitizer options, to pass
target flags to both userspace selftests and their target libbpf
builds on Linux 6.6, 6.12 and 6.18. Host tools and kernel modules
do not consume this variable. USERCFLAGS would only cover the
selftests, leaving their libbpf builds without the target flags.
This covers the targets built by this package; CROSS_BPFTOOL
does not consume SAN_CFLAGS.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/25345
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 8694449c7a)
Link: https://github.com/openwrt/openwrt/pull/25535
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The existing 6 GHz auth_type override only covers mixed modes
(psk-sae, eap-eap2), upgrading them to their WPA3 equivalents.
However, if a user configures pure WPA2 (psk or eap) on a 6 GHz
radio, the configuration falls through unchanged and hostapd rejects
it with a confusing error about invalid AKM suite.
Extend the override to also cover pure WPA2 modes:
- psk / psk-sae -> sae
- eap / eap-eap2 -> eap2
This matches the existing silent-upgrade pattern and ensures the
radio comes up regardless of which legacy encryption the user
selected.
Signed-off-by: Michael Pfeifroth <micpf@westermo.com>
Link: https://github.com/openwrt/openwrt/pull/23914
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 4fed8d3c79)
Link: https://github.com/openwrt/openwrt/pull/25528
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
b0911074d3cf plat: update closed-source object for AN7581 and AN7583
705478c3d84f plat: add DRAM calibration closed-source object for EN7523
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 14ce351772)
Debian 11 ships coreutils 8.32, whose cksum does not support the
-a crc32b option. This leaves crc empty and causes the subsequent shell
arithmetic expression to fail.
Use Python's built-in binascii.crc32 implementation instead. Python 3 is
already required by the OpenWrt build system and produces the same CRC-32
value before the existing final XOR.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
(cherry picked from commit 831900b41b)
Add support for compiling Airoha ATF, based on a modified version of the
TF-A based on 2.10.
The package will clone the base TF-A and apply the modified source and
pre-compiled objects (DDR calibration, eFUSE handling, TX/RX path...) to
correctly compile.
An helper script is added to implement the same format used for special BL2
handling. BL2 is composed of 3 sub-phase with a initial BL21, a BL22 that
loads a LZMA decompressor and BL23 that actually calibrate and loads BL31
ATF.
Also a special flash_table is used to handle SPI-NAND externally to the
BL2, a special Host target is added for that.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/24257
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit c249552ea5)
Update the kernel configuration.
FWNODE_PCS is now a user-visible Kconfig option and must be explicitly
configured.
Disable it by default in the generic kernel configuration and enable it
for the Airoha AN7581 and AN7583 subtargets which require PCS firmware
node support.
This prevents non-interactive kernel configuration from failing during
syncconfig.
Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/21019
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
(cherry picked from commit 40f6298d06)
Link: https://github.com/openwrt/openwrt/pull/24823
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport v7.3 phylink patches to the generic target required for the
latest fwnode phylink PCS patches which support multiple (sub-)targets,
including MTK and qualcommax.
This update includes better PCS release logic, switch to full notifier
add/release PCS handling, devres managed PCS provider variant and
general code improvements.
In addition, update every user to the latest fwnode phylink PCS API.
In the latest API, fwnode_pcs_add_provider() returns a pointer to
the provider or the error code instead of the previous plain return
value. As such, update error handling and add a descriptive error
message upon failure. Also the provider remove logic changed and with
the support of devres API, switch every user to devm_ variant.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
[ improve commit description, refresh patch, update any driver to new API]
Co-Developed-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/24973
(cherry picked from commit b6a035fc2b)
Link: https://github.com/openwrt/openwrt/pull/24823
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
While implementing standalone PCS support for DSA, it was found that making
the MAC driver passing the available_pcs array is limiting and problematic
for memory handling and allocation. To better handle this, change the logic
and make phylink allocate the struct and make the MAC driver implement a
function in phylink_config .fill_available_pcs to fill the PCS array.
Update the Airoha and Mediatek driver to reflect this new implementation.
Link: https://github.com/openwrt/openwrt/pull/23413
(cherry picked from commit 627cd79e1c)
Link: https://github.com/openwrt/openwrt/pull/24823
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
With new PCS implementation, the pcs property needs to be updated to the
new name of 'pcs-handle' to correctly work with PCS fwnode
consumer/provider.
Fixes: 4d5f579a81 ("airoha: update PCS node in DTSI for new PCS implementation")
(cherry picked from commit 953f1aaa93)
Link: https://github.com/openwrt/openwrt/pull/24823
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Update the PCS node in AN7581/AN7583 .dtsi for new PCS implementation.
The #pcs-cell is now needed for the produced/consumer implementation.
Also add entry for USB and PCIe PCS for AN7581 but keep them disabled
by default. USB and PCIe PCS for AN7583 node will be added later once PHY
code will stabilize.
Link: https://github.com/openwrt/openwrt/pull/23271
(cherry picked from commit 4d5f579a81)
Link: https://github.com/openwrt/openwrt/pull/24823
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Migrate Airoha PCS/Ethernet pending patch to PCS standalone implementation.
This new implementation drop the hack of reading and accessing the dev from
a different device and drop the legacy pcs_create/drop implementation in
favor of fwnode one with a provider/consumer approach.
This is also to sync with the proposed series posted upstream for revision.
The new PCS patch for AN7581 implement full support for USB and PCIe PCS.
The 25.12 variants of 310-10 and 606 are not applicable to this branch and are dropped.
Link: https://github.com/openwrt/openwrt/pull/23271
(cherry picked from commit c5427d4cbe)
Link: https://github.com/openwrt/openwrt/pull/24823
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add a vendor profile for Fibocom modems so that proto ncm can drive them.
Without it ncm.sh reports UNSUPPORTED_MODEM, as the manufacturer string
returned by AT+CGMI has no matching key in ncm.json.
The FG621-EA is used in the ASUS 4G-AX56 and the TP-Link TL-MR500 v1. The
profile keys off the manufacturer string rather than any particular board,
so it applies to Fibocom NCM modems generally.
ncm.json is installed by comgt-ncm, so bump PKG_RELEASE to make sure
existing installations pick up the new vendor profile on upgrade.
This change originates from PR #19793 by kddred, open in draft since
August 2025 without review. The original commit is authored and signed
off with a GitHub noreply address, which the commit formality check
rejects, so it could not be carried unmodified, and kddred has not been
active since August 2025. Authorship is reassigned for that reason alone;
the work is theirs. Happy to restore the original authorship if a usable
address becomes available.
Tested on an ASUS 4G-AX56 (HW rev A1) on both main and openwrt-25.12.
Link: https://github.com/openwrt/openwrt/pull/19793
Signed-off-by: Fredrik Hallin <fredappsdev@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/24974
Signed-off-by: Jonas Jelonek <jonas@jonasjelonek.de>
(cherry picked from commit 19ff245b92)
Signed-off-by: Fredrik Hallin <fredappsdev@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/25401
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The WR3000S has a GPIO LED behind its front-panel "Internet" lamp
(white:wan-online, &pio 11), but no board.d entry, so no trigger is ever
set and the lamp stays dark. Give it the same netdev trigger the WR3000H
and WR3000P already use for their white:wan-online LED: follow the link
state of the wan port. As on those boards, "link" means the wan port has
carrier, not that connectivity works.
The panel's WAN and LAN1-4 lamps are not GPIO LEDs and are not registered
as Linux LEDs at all; they light on link in hardware, so board.d cannot
address them and they are untouched here. The -ubootmod variant includes
the same mt7981b-cudy-wr3000s-v1.dtsi, and so the identical LED, and is
listed alongside.
Tested on a WR3000S v1 (OEM layout), on an image built from main at
6727587d24 plus this commit: after a config-wipe sysupgrade the board.d
entry is applied automatically (board.json -> system.led_internet), the
lamp lights while the WAN port has link, and it goes dark when it loses
link. Only the OEM-layout variant was flashed.
Signed-off-by: Ivan Rainbolt <ivan@github.ivanthegeek.com>
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/25335
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit bafaf2665a)
Link: https://github.com/openwrt/openwrt/pull/25336
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
OpenSSL 3.5.8 fixes zero-length message handling for AES-GCM-SIV
upstream with commit bdeb0cd994d9 ("Check the tag on EVP_Cipher()
finalize: Poly1305 and OCB AEADs", CVE-2026-75803, backport of
5741d29a5f35): aes_gcm_siv_finish() now generates the tag when the
finalization is the first empty-message operation.
That makes the cipher_aes_gcm_siv.c hunk of our local patch redundant,
and worse than redundant. By substituting the address of an empty
object for the NULL input pointer it keeps routing the terminal
EVP_Cipher(ctx, out, NULL, 0) call to aes_gcm_siv_encrypt()/
aes_gcm_siv_decrypt() instead of aes_gcm_siv_finish(), so the tag
supplied by the caller is never compared and a forged tag is accepted.
That is the hole the upstream commit closes.
Measured against a locally built 3.5.8; the EVP_Cipher() return value
is a byte count, so 0 means the tag was accepted and -1 means it was
rejected:
decrypt empty msg EVP_Cipher(out, NULL, 0)
genuine forged genuine forged
3.5.8 vanilla ok rejected 0 -1
3.5.8 + patch 010 ok rejected 0 0 <- bad
3.5.8 + this commit ok rejected 0 -1
AES-SIV has no equivalent fix in 3.5.8 or in openssl master, and
without the second hunk a zero-length message cannot be encrypted at
all, so keep that hunk and rename the patch to match what is left.
Fixes: 2bc7978323 ("openssl: fix AES-GCM-SIV and AES-SIV with zero-length messages")
Assisted-by: Claude:claude-opus-5
Link: https://github.com/openwrt/openwrt/pull/24944
(cherry picked from commit bacf308ec0)
Link: https://github.com/openwrt/openwrt/pull/25326
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add support for the PCIe required to make the PCIe Gen3 Controller work for
Airoha AN7583 SoC. To correctly work both the PCIe PHY and the QPHY needs
to be configured or PCIe card will fail to train and detect.
Automatically refresh any affected patch.
(cherry picked from commit 443e267bdb)
Link: https://github.com/openwrt/openwrt/pull/25320
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The AN7581 USB PHY driver can't be reused on AN7583: the SoC has a
single USB PHY block driving two U2 ports and one U3 port, and both the
PLL init sequence and the U3 calibration differ.
Add the AN7583 USB PHY driver from Christian Marangi, with the PCIe PHY
part dropped (the AN7583 PCIe serdes has no DT node yet) and five bugs
fixed: an uninitialized "ret" passed to dev_err_probe(); a NULL check on
syscon_regmap_lookup_by_phandle(), which returns an ERR_PTR on failure;
a missing per-instance offset in u2_set_mode(), which made it write the
first U2 port's register regardless of the PHY it was called on; an
off-by-one bound in parse_subnode() allowing a write past the end of
priv->phys[]; and a discarded return value in phy_init(), which
swallowed the U3 calibration failure reported by u3_init().
Enable the driver on the an7583 subtarget. The an7581 subtarget keeps
its own PHY_AIROHA_USB driver untouched.
Signed-off-by: Vitaliy Sochnev <sochnev.v.74@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/24609
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 38ac788893)
Link: https://github.com/openwrt/openwrt/pull/25320
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The airoha,an7583-usb-phy compatible added by the USB PHY driver had no
matching binding document. The AN7581 equivalent ships one as a separate
patch (220-05), which is also where the AIROHA_USB2_MONCLK_SEL* defines
used by an7583.dtsi come from.
The AN7583 binding is not simply "same as AN7581": the SoC has a single
PHY block with four named reg regions, per-port child nodes carrying
node itself.
The AIROHA_USB2_MONCLK_SEL* defines are reused from the AN7581 binding
header, as the values are identical on AN7583.
Signed-off-by: Vitaliy Sochnev <sochnev.v.74@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/24609
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit ec50342362)
Link: https://github.com/openwrt/openwrt/pull/25320
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Currently, sysupgrade silently fails to erase or write to the SPI-NAND
flash on the JioRouter AX6000. This is caused by the SPI pinctrl group
mistakenly using `bias-disable`, which leaves the flash chip's hardware
HOLD and Write Protect (#WP) pins floating.
When combined with an upstream kernel regression that accidentally
arms the #HOLD function on Winbond W25N0xKV chips, these floating pins
drop low (often exacerbated by UART noise). This pauses the chip and
causes all flash operations to silently fail while returning success.
Fix this by properly configuring `bias-pull-up = <MTK_PUPD_SET_R1R0_11>`
for `SPI2_CS`, `SPI2_HOLD`, and `SPI2_WP`, ensuring the flash chip
remains electrically unpaused and unlocked. Additionally, apply
`bias-pull-down` to the clock and data lines to match MediaTek reference
designs.
Signed-off-by: Sheikh Faisal <sheikhfaisal713@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/25122
(cherry picked from commit 817b17cc34)
Link: https://github.com/openwrt/openwrt/pull/25095
Signed-off-by: Jonas Jelonek <jonas@jonasjelonek.de>
| Component | Details |
|------------------|------------------------------------------------|
| **SoC** | MediaTek MT7986A (4× ARM Cortex-A53 @ 2.0 GHz) |
| **RAM** | 512 MB |
| **Flash** | 256 MB NAND |
| **Ethernet** | 5× 10/100/1000 Mbps (1 WAN + 4 LAN) |
| **WLAN 2.4 GHz** | MediaTek MT7976GN — 802.11b/g/n/ax, 4×4 MIMO |
| **WLAN 5 GHz** | MediaTek MT7976AN — 802.11n/ac/ax, 4×4 MIMO |
| **LEDs** | 1× RGB LED (GPIO-controlled) |
| **Button** | 1× Reset |
| **USB** | Yes |
**MAC Addresses:**
| Interface | Source |
|------------|-------------------------------------------------|
| WAN/Label | MFG MTD partition (variant-specific fallback) |
| LAN | WAN + 1 |
| 2.4 GHz | WAN + 2 |
| 5 GHz | WAN + 3 |
Supported variants and MAC source:
- JIDU6J01,JIDU6201: binary at offset 0x00
- JIDU6401: binary at offset 0x20
- JIDU6601: ASCII text at offset 0x1d0
- JIDU6701: ASCII mac= key
---
**1. Extracting U-Boot Credentials**
The U-Boot username and password are stored in the `MFG` partition. To retrieve them:
- With root access on stock OS: Read directly from the MFG partition.
- Without root access: Dump the NAND flash first, then extract the credentials from the dump.
**2. Prepare TFTP server**
- Set a static IP on the ethernet interface of your computer
(e.g. default: ip `192.168.1.2`, gateway `192.168.1.1`).
- Download the initramfs image and host it with the TFTP server.
**3. Interrupt boot**
Attach UART and power on the router. When the boot menu appears, select **Failsafe Mode**,
then press `Ctrl-C` to interrupt and enter the credentials extracted from `MFG` partition.
**4. Load and run initramfs image**
```sh
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.2
tftpboot 0x46000000 openwrt-mediatek-filogic-jiorouter_ax6000-jidu6j01-initramfs-kernel.bin
fdt addr $(fdtcontroladdr)
fdt rm /signature
bootm
```
**5. Flash sysupgrade image**
Place the sysupgrade image in `/tmp`, then run:
```sh
sysupgrade /tmp/openwrt-mediatek-filogic-jiorouter_ax6000-jidu6j01-squashfs-sysupgrade.bin
```
Alternatively, use the sysupgrade option in LuCI.
Signed-off-by: Sheikh Faisal <sheikhfaisal713@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23510
(cherry picked from commit 552e617bd0)
Link: https://github.com/openwrt/openwrt/pull/25095
Signed-off-by: Jonas Jelonek <jonas@jonasjelonek.de>
% git shortlog v1.0.20250521..v1.0.20260223
Doug Freed (1):
wg-quick@.service: add deps on wg-quick.target
Jason A. Donenfeld (8):
wg-quick: linux: use smallest mtu, not largest
syncconf: account for psks removed from config file
wg-quick: linux: deal with resolvconf migration more gracefully
wg-quick: use addconf instead of setconf
wg-quick: linux: do not unnecessarily set sysctl
config: preserve const correctness
syncconf: account for persistent keepalive removed from config file
version: bump
Robyn Kosching (1):
wg-quick: pass on # comments to {Pre,Post}{Up,Down}
Build system: x86/64
Build-tested: x86/64-glibc
Run-tested: x86/64-glibc
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit eda2630ceb)
Signed-off-by: Sander van Deijck <sander@vandeijck.com>
Link: https://github.com/openwrt/openwrt/pull/24666
Signed-off-by: Robert Marko <robimarko@gmail.com>
Shiji Yang
Max Plekh
Grische
Mario Andrés Pérez
Hauke Mehrtens
Ivan Pavlov
Tianling Shen
Michael Pfeifroth
Christian Marangi
Mikhail Zhilkin
Robert Marko
Kenneth Kasilag
George Moussalem
Fredrik Hallin
Ivan Rainbolt
Fengyu Wu
Nick Hainke
Peter Polonec
Vitaliy Sochnev
Julius Bairaktaris
Sheikh Faisal
John Audia