mirror of
https://github.com/openwrt/openwrt.git
synced 2026-10-14 04:28:41 +04:00
Gilberto Conde
20b25487f7
The U-Boot script embedded in the GL.iNet QSDK factory image hardcodes the GL-B3000 flash layout. Replace the UBI offset and size with placeholders filled in by the gl-qsdk-factory recipe, so other GL.iNet boards with a different layout can use the same script. The script is copied under a per-device name, which keeps the FIT description unchanged and avoids devices overwriting each other's substituted copy in KDIR_TMP. Signed-off-by: Gilberto Conde <gilbertorconde@gmail.com>
48 lines
1.5 KiB
Plaintext
48 lines
1.5 KiB
Plaintext
if test "x$verbose" = "x"; then
|
|
failedmsg=\'[failed]\'
|
|
else
|
|
failedmsg='######################################## Failed'
|
|
fi
|
|
|
|
if test -n $soc_hw_version; then
|
|
if test "$soc_hw_version" = "20180100" || test "$soc_hw_version" = "20180101" ; then
|
|
echo 'soc_hw_version : Validation success'
|
|
else
|
|
echo 'soc_hw_version : did not match, aborting upgrade'
|
|
exit 1
|
|
fi
|
|
else
|
|
echo 'soc_hw_version : unknown, skipping validation'
|
|
fi
|
|
|
|
if test "$machid" = "8040004" ; then
|
|
echo 'machid : Validation success'
|
|
else
|
|
echo 'machid : unknown, aborting upgrade'
|
|
exit 1
|
|
fi
|
|
|
|
if test "x$verbose" = "x"; then
|
|
echo \\c'Flashing ubi: '
|
|
setenv stdout nulldev
|
|
else
|
|
echo '######################################## Flashing ubi: Started'
|
|
fi
|
|
|
|
failreason='error: failed on image extraction'
|
|
imxtract $imgaddr ubi || setenv stdout serial && echo "$failedmsg" && echo "$failreason" && exit 1
|
|
failreason='error: failed on partition erase'
|
|
nand device 0 && nand erase @UBI_OFFSET@ @UBI_SIZE@ || setenv stdout serial && echo "$failedmsg" && echo "$failreason" && exit 1
|
|
failreason='error: failed on partition write'
|
|
nand write $fileaddr @UBI_OFFSET@ @ROOTFS_SIZE@ || setenv stdout serial && echo "$failedmsg" && echo "$failreason" && exit 1
|
|
if test "x$verbose" = "x"; then
|
|
setenv stdout serial
|
|
echo '[ done ]'
|
|
setenv stdout nulldev
|
|
setenv stdout serial
|
|
else
|
|
echo '######################################## Flashing ubi: Done'
|
|
fi
|
|
|
|
exit 0
|